• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.236-237
• /
• 2000

용액인상법에 의하여 Cr$^{3+}$ 이온이 0.1-0.2% 주입된 Alexandrite (Cr$^{3+}$ :BeAl$_2$O$_4$) 단결정을 성장하고, 성장한 단결정을 이용하여 레이저 소자를 제조하였다. 고품질의 단결정을 성장할 수 있는 결정성장조건을 규명하고, Cr$^{3+}$ 이온의 유효편석 계수를 계산하였으며, 결정 결함 및 분광 물성을 조사하였다. 결정성장 실험 결과, 유속 3 1/min의 질소분위기, 이리듐 도가니 및 <001>방위의 Alexandrite 단결정을 종자결정으로 사용하여 결정을 성장하는 경우 최적의 결정성장 조건은 인상속도 0.5-1.0 mm/hr와 회전속도 20-25 rpm이었다. 육성된 결정은 (100)면이 넓게 발달되었으며, (120)과 (010)면이 측면에 발달되는 판상의 직팔각기둥의 형태로 성장되었다. 결정결함으로써 parasite crystal의 형성과 경계면의 균열, striation, inclusion 등이 검출되었다. Alexandrite 단결정 내에 분포하는 Cr$^{3+}$ 이온의 유효편석계수 k$_{eff}$는 2.8로 계산되었다. 분광물성으로써 실온에서의 $^4$A$_2$$\longrightarrow$$^4$T$_2$(689.6-489.3 nm), $^4$A$_2$$\longrightarrow$$^4$T$_1$(489.3-311.33m) 천이에 의한 흡수를 확인하고, $^4$T$_2$$\longrightarrow$$^4$A$_2$(650-800 nm), $^2$E$\longrightarrow$$^4$A$_2$에 의한 nophonon line R$_1$, R$_2$(680.4, 678.5 nm) 및 $^2$T$_1$$\longrightarrow$$^4$A$_2$(655.7, 649.3, 645.2 nm)의 형광방출 스펙트럼을 얻었으며, 형광수명은 0.264 ms로 조사되었다. 제조된 레이저 발진봉은 직경 6.3 m, 길이 45 nm이었다.

• Composites Research
• /
• v.30 no.1
• /
• pp.15-20
• /
• 2017

In this study, LIPCA-S2 actuator with a piezoelectric single crystal layer and a carbon/epoxy layer was designed and evaluated to increase actuation performance of piezo-composite unimorph actuator. A curvature change model generated by the induced strain of a piezoelectric layer was used to predict the tip displacement of the piezo-composite unimorph cantilever. However, we found that there was big difference between the predicted and the measured tip displacement of LIPCA-S2 cantilever actuator when we used the previous linear prediction model. A new prediction model considering the change of piezoelectric strain coefficient and elastic modulus for the compression stress variation of the PMN-29PT single crystal layer was used and it was found that the difference between the predicted and the measured tip displacement reduced considerably.

• Analytical Science and Technology
• /
• v.5 no.3
• /
• pp.327-332
• /
• 1992

Mn-Zn ferrite single crystals show some fluctuations in composition along the direction of growth by the conventional Bridgman method. The single crystal with a uniform composition was obtained by maintaining the liquid composition content. For example, two batches of powder were prepared : one is consisted of 52 mol% of $Fe_2O_3$, 30 mol% of MnO, and 18 mol% Zn(Composition A), and the other 53 mol% of $Fe_2O_3$, 28.5 mol% of MnO, and 18.5 mol% ZnO(Composition B). Crack-free single crystals with the uniform composition B were grown in a size of 60mm diameter, 300mm long by melting the pellets of composition A and followed by supplying the composition B as tablets. Initial permeabilities were obtained above 600 at 5 MHz in the region of 30~270 mm along the direction of growth.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.415-424
• /
• 2012

This paper tried to identify the impacts of emotional labor on burnout and job satisfaction in the casino industry. Prepared questionnaires were distributed to 300 sample employees working in domestic casino, then used for data analysis 300. The results of this study are as follows: Firstly, surface acting have a positive effect on emotional exhaustion, lack of accomplishment and depersonalization. But deep acting have a negative effect on emotional exhaustion. And deep acting, emotion control have a negative effect on lack of accomplishment and depersonalization. Secondly, surface acting have a positive effect on job environment. Also deep acting, emotion control have a positive effect on rewards and value sharing. And emotion control have a positive effect on work environment. Thirdly, deep acting have a negative effect on job environment. Also, surface acting have a negative effect on rewards and value sharing.

• Culinary science and hospitality research
• /
• v.20 no.3
• /
• pp.161-170
• /
• 2014

Making jungkwa, a traditional Korean snack, is difficult and complicated. In this study, a rice cooker was used to simplify the process of making jungkwa made with ginseng. Comparing ginseng jungkwa cooked in a rice cooker with the control group cooked in a traditional way, their chewiness, browness, glossy and overall preference were similar when cooked for 160 minutes, 175 minutes, 190 minutes, 205 minutes, and 220 minutes. The moisture content of ginseng jungkwa cooked in a rice cooker decreased, while its sugar content increased with increased cooking time. Also, the ginseng jungkwa had lower lightness and higher redness and yellowness as its cooking time got longer. The ginseng jungkwa cooked for 205 minutes was most similar to the one cooked in a traditional way. In the measurement of texture, the ginseng jungkwa had higher hardness with increased cooking time, and, when cooked for 205 minutes, it was most similar to the one cooked in a traditional way in chewiness. The sensory evaluation showed that the one cooked for 205 minutes was most preferred in appearance, smell, taste, texture and overall preference. Based on these results, this study revealed that using a rice cooker can be substituted for the traditional way of making jungkwa.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.184-191
• /
• 2017

This paper presents cluster based hybrid spectrum sensing system for M2M services. For each cluster, secondary nodes within the transmission radius of the primary node use hard decision method through local spectrum sensing to determine whether the primary node exists. And the other secondary nodes and the secondary nodes having poor radio channel conditions judge the existence of the primary node through the soft decision method of the values obtained by performing the cooperative spectrum sensing. In the proposed hybrid spectrum sensing system, the performance according to the number of secondary nodes is analyzed with the conventional system over Rayleigh fading channel. As the number of cooperative sensing users increased to 2, 3 and 4, the cluster error probability decreased to 0.5608, 0.5252 and 0.4001 at SNR of -10[dB] respectively. Since the proposed system uses less overhead traffic, it is found that it is more effective in terms of frequency usage than the conventional system using soft decision-soft decision and soft decision-hard decision methods.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.23-27
• /
• 2014

In this paper, we propose a soft demapping method for 64-ary APSK in the DVB-S3 system. The proposed method in this paper uses the hard decision threshold (HDT) line for each constituent bit in a symbol, and calculates the soft bit information with the distance between the HDT line and the detected symbol. If the HDT lines are defined in a simple manner, the complexity to estimate soft information can be largely reduced compared with the maximum likelihood detection (MLD) which has an exponential complexity. By considering this, we first derive HDT lines for each constituent bit for a 64-APSK symbol, and propose a method to calculate soft bit information. We simulate the BER performance of the proposed scheme by using a turbo codes which requires soft-input-soft-output information, and compare it that of the MLD. The result show that the proposed scheme produces approximating performance to MLD with largely reduced complexity.

• The KIPS Transactions:PartB
• /
• v.12B no.2 s.98
• /
• pp.131-136
• /
• 2005

Motion Estimation (ME) has been developed to remove redundant data contained in a sequence of image. And ME is an important part of video encoding systems, since it can significantly affect the qualify of an encoded sequences. Generally, ME consists of two stages, the integer pixel motion estimation and the half pixel motion estimation. Many methods have been developed to reduce the computational complexity at the integer pixel motion estimation. However, the studies are needed at the half pixel motion estimation to reduce the complexity. In this paper, a method based on the correlations between integer pixel motion vectors and half pixel motion vectors is proposed for the half pixel motion estimation. The proposed method has less computational complexity than the full half pixel search method (FHSM) that needs the bilinear interpolation of half pixels and examines nine half pixel points to the find the half pixel motion vector. Experimental results show that the speedup improvement of the proposed method over FHSM can be up to $2.5\~80$ times faster and the image quality degradation is about to $0.07\~0.69(dB)$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.233-239
• /
• 2019

An unmanned underwater vehicle is a major weapon system that allows surveillance and reconnaissance missions in border areas or threatening areas where enemy submarines are present. Unmanned underwater vehicles can be used to explore underwater resources, predict disasters, and survey the topography of the ocean floor in the civilian fields, while in the defense fields, it can be used for anti-submarine reconnaissance and mine countermeasures. In this paper, we first investigate the main classification of unmanned underwater vehicles, and foreign R&D trends are analyzed based on the main classification criteria by weight, such as portable, light, heavy and large-scale unmanned underwater vehicles. Then we examine the trends in the development of domestic unmanned underwater vehicles. Finally, through the analysis of both domestic and foreign unmanned underwater vehicles, we present future development trends of unmanned underwater vehicles in order to set defense goals to counter the anticipated threats and diversified potential environment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.324-324
• /
• 2017

기후변화로 인하여 강우특성이 변화하여 기존 치수시설물의 설계능력을 초과하는 홍수사상이 빈발하고 있다. 특히, 도심지내의 하천변 저지대는 대표적인 침수취약지역으로 강우사상이 설계빈도를 상회하는 경우 침수피해를 입을 수 있는 지역이다. 기후변화로 인하여 강우특성이 변화하는 상황에서 기존 빗물펌프장의 치수능력 증대 또는 신규시설의 설치가 필요하지만, 부지확보의 어려움으로 신규사업의 진행이 어려움을 겪고 있는 상황이다. 이와 같은 문제점에 대비하여 기존 빗물펌프장 설계단계에서 고려하지 않고 있는 요소의 추가적인 검토가 필요하다. 빗물펌프장의 유수지 용량 설계단계에서는 유입되는 우수의 수문곡선과 펌프의 최대토출량을 비교하여 잔류하게되는 우량수문곡선을 적분하여 설계용량을 산정한다. 그러나, 빗물펌프장의 실제 운영단계에서는 유수지 내의 수위와 하천의 수위를 고려하여 단계적으로 펌프를 가동하기 때문에 설계단계의 가정과 차이가 발생하게 된다. 또한, 빗물펌프장은 넓은 부지에 유입구와 흡수정을 설치함에 있어서 배치에 따른 유수지내의 흐름특성을 고려하지 않고 있다. 흡수정 설계단계에서는 흡수정으로 유입되는 흐름 특성이 토출성능에도 영향을 미칠 수 있으므로 이에 대한 분석이 필요한 상황이다. 본 연구에서는 빗물펌프장의 유수지 및 흡수정 형상과 펌프운영 기준을 반영하여 2차원 수치해석을 수행하고 유수지내의 흐름특성을 재현하였다. 수치모의결과, 유수지 형상에 따라서 흐름특성이 상이하고 흡수정 인근의 흐름특성이 유수지와 흡수정 배치에 영향을 받음을 확인할 수 있었다.