• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5223-5231
• /
• 2015

The purpose of this study was to examine relations in autonomy support, self-determined motivation, and learning outcomes among college students. The subjects of this study were 231 college students in Jeonnam Province and Daejeon city, sampled by convenience sampling. The result of this study is as follows: First, perceived autonomy support had a significant direct positive effect on identified and intrinsic motivation. Also perceived autonomy support had a significant direct positive effect on learning outcomes and processes. Second, external had a significant positive effect on duty motivation and duty motivation had a direct positive effect on identified duty. In addition to identified motivation had a significant positive effect on intrinsic motivation, learning outcomes and processes. Third, intrinsic motivation had positively influenced on learning outcomes and processes. As the last of the findings, perceived autonomy support, duty motivation and identified motivation had significant effects on learning outcomes and processes. These results imply that perceived autonomy and self-determination motivation is important to enhance academic performance.

• Korean journal of food and cookery science
• /
• v.23 no.5
• /
• pp.601-608
• /
• 2007

In this study, the physicochemical and sensory characteristics of cream soups prepared with various levels of mulbery leaf powder were investigated. The pH, L-value, and viscosity of the cream soups decreased as the mulbery leaf powder content increased. The a-value -1.91 of the control was significantly higher than the other samples. The b-value of the sample with a mulbery leaf powder to flour ratio of 4:6 was highest at 38.59. Results of the descriptive tests showed that darkness, green aroma, bitter taste, and thickness had increased significantly, and savory flavor, greasy taste, floury taste, and softness decreased significantly as the content of mulbery leaf powder increased. A consumer acceptability test for sensory properties indicated that the mulbery leaf powder to flour ratio of 1:9 had the highest flavor and overall acceptability. Also, overall acceptability had positive correlations with savory aroma, savory flavor and softness, but had negative correlations with green aroma and thickness.

• Journal of Digital Convergence
• /
• v.15 no.1
• /
• pp.453-459
• /
• 2017

This study was conducted to review the usage behavior of mobile social network games that are attracting attention as a new growth engine in the game market. To that end, a survey was conducted on 250 male and female university students. The result of the study showed that first, the relationship formation motivation and seeking fun during leisure times in association with mobile social network games had a positive effect on game attitudes. Second, the relationship formation motivation had a positive effect on the continuous use intention. Third, the relationship formation motivation and the fun-seeking motivation had a positive effect on word-of-mouth recommendation, while the relationship formation motivation and advertisement recommendation motivation had a positive effect on the intention to recommendation online formats. Fourth, the attitude towards mobile social network games had a positive effect on the continuous use intention. Lastly, the attitude towards mobile social network games had a positive effect on only the intention to recommendation through word-of-mouth. This study is expected to provide useful and basic data for the development of quality game content that will cater to users' needs.

• Clean Technology
• /
• v.19 no.4
• /
• pp.388-392
• /
• 2013

Iindium-tin-oxide (ITO) material was had to use in display application as transparent electrode. However it would be problems comes up, the depletion of indium, tin and energy consumption of production process. Therefore recently trend was demanded alternative ITO material and recycling/reused ITO. In this conditions, the environmental impact have to express correct value about recycling/reused ITO process. The life cycle assessment was valuable method in this process. Thus first step was carried out separating in/out put (material) sources and then, exactive data base (DB) was applied. The result of environment impact was calculated by affect categories and recycling rate was set to 34% (This value was measured in previous project). The rate (g) of ITO material was calculated by chemical equivalent. In result, environmental impact were revealed acidification potential and abiotic depletion and if do not recycle/reuse ITO, $ 476 per 1 ton waste in land.

• Management & Information Systems Review
• /
• v.34 no.3
• /
• pp.231-250
• /
• 2015

This study is about the effect of interaction and flow of consumers within the company SNS on the consumers' affection. Verification took place through empirical analysis based on the theoretical background. The following is the summary of the research results generated based on the research results. First, correlation between aspect of the motivation for the use of contents and interactivity is as follows. Mutual sense of solidarity (Hypothesis 1-1), influence (Hypothesis 1-2), connectivity (Hypothesis 1-3) and reactivity (Hypothesis 1-4) exerted positive(+) on the interaction. Second, correlation between aspect of the motivation for the use of contents and flow is as follows. Mutual sense of solidarity (Hypothesis 2-1), influence (Hypothesis 2-2) and connectivity (Hypothesis 2-3) exerted positive(+) effect on immersion. Meanwhile, reactivity (Hypothesis 1-4) was not statistically significant when it comes to flow. Third, interaction between contents characteristics and interaction exerted positive(+) positive on the interactivity of entertainingness (Hypothesis 3-1) and informativity (Hypothesis 3-2). Fourth, correlation between contents characteristics and flow was examined, which demonstrated that only informativity (Hypothesis 4-2) exerted positive(+) effect on the immersion. Meanwhile, entertainingness was not statistically significant when it comes to the immersion. Lastly, correlation between interaction, flow and affection is as follows. Correlation between interactivity and flow(Hypothesis 5) was not statistically significant while interactivity(Hypothesis 6) and Flow(Hypothesis 7) exerted positive(+) effect on the affection. This study presents diverse implications and significances to the working level people who use the company SNS based on these results.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.2
• /
• pp.35-43
• /
• 2014

The application of the Life Cycle Impact Assessment (LCIA) methodology to analyze the environmental burden of appling the digestates to corn field including different swine waste treatment systems was investigated. The first part of LCA is an inventory of parameters used to emissions released due to the system under investigation. In the following step, the Life Cycle Impact Assessment, the inventory data were analyzed and aggregated in order to finally get one index representing the each environmental burden. Each corn field applied with the aerobic and anaerobic digestates including different swine waste treatment systems was used as an example for the life cycle impact analysis. With analyzing the agricultural environmental burden, it observed that the effect of corn field applied aerobic digestate including digestion system was 7.6 times higher at eutrophication effects, but global warming potential effect was 0.9 times less than its applied anaerobic digestate.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.3-12
• /
• 2011

The structural behavior of continuous reinforced concrete deep beams is mainly controlled by the mechanical relationships associated with the shear span-to-effective depth ratio, flexural reinforcement ratio, load and support conditions, and material properties. In this study, a simple indeterminate strut-tie model which reflects characteristics of the complicated structural behavior of the continuous deep beams is presented. In addition, the reaction and load distribution ratios defined as the fraction of load carried by an exterior support of continuous deep beam and the fraction of load transferred by a vertical truss mechanism, respectively, are proposed to help structural designers for the analysis and design of continuous reinforced concrete deep beams by using the strut-tie model approaches of current design codes. In the determination of the load distribution ratio, a concept of balanced shear reinforcement ratio requiring a simultaneous failure of inclined concrete strut and vertical steel tie is introduced to ensure a ductile shear failure of reinforced concrete deep beams, and the primary design variables including the shear span-to-effective depth ratio, flexural reinforcement ratio, and concrete compressive strength are implemented after thorough parametric numerical analyses. In the companion paper, the validity of the presented model and load distribution ratio was examined by applying them in the evaluation of the ultimate strength of multiple continuous reinforced concrete deep beams, which were tested to failure.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.180-189
• /
• 2017

Pharmaceutical co-crystals primarily to improve the solubility as well as stability of insoluble drug are to be investigated more intensively for IMDs as US FDA has reclassified co-crystal as a special case of solvates in August this year. In this study, we proposed a mechanism of indomethacin-saccharin co-crystal formation and the creation of transient indomethacin meta-stable form using in-line monitoring tools with the addition rate of anti-solvent as a critical process parameter. Among various instruments, we combined PVM (particle vision measurement) and FBRM (focused beam reflectance measurement) for the in-line monitoring of anti-solvent co-crystallization process. The off-line characterization of resulting powders was carried out employing the PXRD (powder x-ray diffraction) and DSC (differential scanning calorimeter). It was observed that the pathway to the final IMC-SAC co-crystal was significantly dependent upon the anti-solvent addition rate. The process conditions to obtain high quality co-crystal powder effectively were established. Consequently, we concluded that in-line monitoring combing the PVM and FBRM should be useful for the in-line monitoring of pharmaceutical co-crystallization processes.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.196-201
• /
• 2020

In order to increase the durability of the pipe framed greenhouse, galvanized steel pipes with four corrosion protection treatments were installed in the greenhouse. After 20 years, experiments on surface corrosion and strength change were conducted. Control (untreated) pipes exposed in the atmosphere showed a 1.3% reduction in strength, but little difference from other treatments. The strength of heavy protective coating pipes buried in the ground decreased by 0.6%, showing little change, but untreated pipes decreased by 15.7%. And antirust paint and asphalt coating pipes decreased by 4.2~4.4%. Pipes exposed in the atmosphere did not show severe corrosion in all samples. There was no change in heavy protective coating pipes, and no rust was found in antirust painting pipes either and there was only slight discoloration. Asphalt coating pipes discolored black and some rust was found, and untreated pipes were rusted by 20~30% of the surface. However, untreated pipes buried in the ground were completely rusted, and asphalt coating pipes were rusted by 80~90% of the surface. Antirust painting pipes were rusted by 20~30%, and heavy protective coating pipes did not change almost. The heavy protective coating treatment showed a clear corrosion protection effect even in the parts buried in the ground, and the antirust painting treatment also showed some corrosion protection effect. Therefore, it is judged to be applicable to the field of pipe framed greenhouses.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.997-1003
• /
• 2011

In order to investigate devolatilization characteristics for ashless coal with relatively low ash content and high heating value, an experiment was performed in different bed configurations of TGA and DTF(Drop Tube Furnace) at atmospheric pressure condition. The heating rate was $10^{\circ}C$/min up to $950^{\circ}C$ in TGA, while the temperatures of DTF varied from 500 to $1300^{\circ}C$ in step of $200^{\circ}C$. A weight loss and particle temperature were obtained to determine devolatilization kinetics. The kinetic parameters including an activation energy and pre-exponential factor for ashless coal were obtained using Coats-Redfern method in TGA and single step method in DTF. Furthermore, the devolatilization kinetics of the ashless coal were compared with the results of different kinds of conventional coal such as sub-bituminous and bituminous. The results show that the activation energy of devolatilazation for ashless coal is lower than those of others in fixed and entrained conditions.