• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.393-396
• /
• 2004

본 논문에서는 선박의 소음을 이용한 선박의 위치추적 및 지음향학적 인자의 역산 기법을 제안하였다. 예인 수평선배열에 의해 계측된 선박의 소음을 시간역전시켜(time reversed) 역전파(back propagation)시킨 음파는 해당 해양환경과 동일한 경우 원래의 음원 즉 선박의 위치에 가장 큰 에너지가 집중된다. 이러한 역전파된 신호의 집중 정도를 이용하여 음원의 위치 및 해양환경(특히 지음향학적 환경) 정보를 추정하였다. 본 역산에서 사용된 목적함수는 정합임펄스응답필터를 사용하여 음원의 위치에 집중된 정규화된 파워로 정의되었다. 최적화 알고리즘으로 유전알고리즘과 Powell 방법이 함께 사용되었다. 제안된 기법을 Elba섬 근해에서 실시된 MAPEX 2000 실험 데이터에 적용한 후 그 결과를 본 논문에서 제시하였으며 그 효용성을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.247-252
• /
• 2008

This paper presents an active vibration control of cantilever beams under disturbances by a primary force. A direct velocity feedback control using a pair of PZT actuator and a velocity sensor is considered. Variation of the stability and performance with the locations of the sensor/actuator pair is investigated. It is found that the maximum gain varies with the locations of the sensor/actuator pair significantly. The maximum gain shows a symmetric distribution along the beam length with respect to the center point, although the boundary condition of the beam is unsymmetric. The control performance is affected by the location of the primary force as well as the location of the sensor/actuator pair. The active control system can more effectively reduce the vibration when the primary force is located close to the fixed boundary.

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1293-1300
• /
• 2008

This paper presents an active vibration control of cantilever beams under disturbances by a primary force. A direct velocity feedback control using a pair of PZT actuator and a velocity sensor is considered. Variation of the stability and performance with the locations of the sensor/actuator pair is investigated. It is found that the maximum gain varies with the locations of the sensor/actuator pair significantly. The maximum gain shows a symmetric distribution along the beam length with respect to the center point, although the boundary condition of the beam is unsymmetric. The control performance is affected by the location of the primary force as well as the location of the sensor/actuator pair. The active control system can more effectively reduce the vibration when the primary force is located close to the fixed boundary.

• 한국소음진동공학회논문집
• /
• 제18권3호
• /
• pp.368-374
• /
• 2008

Multi-axial simulation table(MAST) is widely used in motor companies as the multi-axial excitor for vibration fatigue of target component, which provides the vibrational condition as close as the vehicle test. However, the vibration fatigue performance of target component can be guaranteed with MAST system only in case the input profile covers the required severity of the target component on field test. In this paper, the signal processing for multi-axial vibration fatigue test on vehicle component is presented, from the data acquisition of the target component to the derivation of input profile. To compare the severity of vibration condition between field and proving ground, the energy principle of a equivalent damage is proposed and then, it is determined the optimal combination of special events on proving ground using a sequential searching optimal algorithm. To explain the vibration methodology clearly, seat and door component of vehicle are selected as a example.

• 한국음향학회지
• /
• 제26권6호
• /
• pp.301-305
• /
• 2007

본 연구에서 관심을 갖는 수중환경에서의 천이소음도 가청주파수 대역임에 착안하여 이동통신 시스템의 표준 음성부호화기인 EVRC의 전처리단을 이용하여 배경잡음 구간을 판별하고 이를 바탕으로 수중 천이신호를 탐지하는 알고리즘을 제안하였다. EVRC 전처리 모듈에 프레임 단위의 입력신호가 들어가면 모듈로부터 잡음 구간을 결정하는 플래그, 각 채널의 에너지, 잡음이 제거된 신호, 입력신호의 에너지, 배경잡음의 에너지, 잡음이 제거된 신호의 에너지에 해당하는 파라미터 값을 얻게 된다. 잡음이 제거된 신호의 에너지를 배경잡음의 에너지로 정규화하고 이를 문턱값과 비교함으로써 천이신호를 검출할 수 있다. 또한 문턱 값은 잡음 구간에서 구한 이전 값을 이용해서 갱신된다. 실험결과를 통해 제안한 알고리즘이 백색 또는 유색잡음 하에서도 4% 미만의 오차를 보여주는 것을 검증한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.297-302
• /
• 2007

Vibrating test of vehicle component can be possible in lab-based simulators instead of field testing owing to the development of technology in control algorithm as well as computational process. Currently, Multi-Axial Simulation Table(MAST) is recommended as a vibrating equipment, which excites a target component for 3-directional translation and rotation motion simultaneously and hence, vibrational condition can be fully approximated to that of real road test. But, the vibration-free performance of target component is not guaranteed with MAST system, which is only simulator subjective to the operator. Rather, the reliability of multi-axial vibration test is dependent on the quality of input profile which should cover the required severity of vibrating condition on target component. In this paper, multi-axial vibration testing methodology of vehicle component is presented here, from data acquisition of vehicle accelerations to the obtaining the input profile of MAST using severe data at proving ground. To compare the severity of vibration condition, between real road test and proving ground one, energy principle of equivalent damage is proposed to calculate energy matrices of acceleration data and then, it is determined the optimal combination of special events on proving ground which is equivalent to real road test at the aspects of vibration fatigue using sequential searching optimal algorithm. To explain the vibration methodology clearly, seat and door component of vehicle are selected as a example.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.704-711
• /
• 2006

Vibration test on MAST(multi axial simulation table) system has several advantage over one-axial vibration test that could simulate 6-DOF, 3-axial translation and 3-axial moment, at the same time. Since field vibration motion can be fully represented with 6-DOF, multi-axial vibration test on vehicle component is widely conducted in technical leading companies to make sure its fatigue performance in vibration environment. On the way to fulfill the process, editing technique of obtained field data is key issue to success a reliable vibration testing with MAST system. Since the original signals are not only too large to fulfill it directly, but all of the measured data is not guarantee its convergency on generating its driving files, editing technique of the original signals are highly required to make some events that should meet the equal fatigue damage on the target component In this paper, key technique on editing a field data feasible for MAST system is described based on energy method in vibration fatigue. To explain its technique explicitly, author first introduced a process on field data acquisition of two vehicle component and then, representing events are produced to keep up with the editing strategy about a energy method. In the final chapter, a time information regarding a vibration test on MAST system is derived from the energy data which is critical information to perform a vibration test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.764-769
• /
• 2006

Vibration test on MAST(multi axial simulation table) system has several advantage over one-axial vibration test that could simulate 6-DOF, 3-axial translation and 3-axial moment, at the same time. Since field vibration motion can be fully represented with 6-DOF, multi-axial vibration test on vehicle component is widely conducted in technical leading companies to make sure its fatigue performance in vibration environment. On the way to fulfill the process, editing technique of obtained field data is key issue to success a reliable vibration testing with MAST system. Since the original signals are not only too large to fulfill it directly, but all of the measured data is not guarantee its convergency on generating its driving files, editing technique of the original signals are highly required to make some events that should meet the equal fatigue damage on the target component In this paper, key technique on editing a field data feasible for MAST system is described based on energy method in vibration fatigue. To explain its technique explicitly, author first introduced a process on field data acquisition of two vehicle component and then, representing events are produced to keep up with the editing strategy about a energy method. In the final chapter, a time information regarding a vibration test on MAST system is derived from the energy data which is critical information to perform a vibration test.

• 대한후두음성언어의학회지
• /
• 제13권1호
• /
• pp.28-32
• /
• 2002

Background and Objective : Classical singing students who have received in systematic voice training appeared distinctive voice characteristics compared to normal people who have not received in systematic voice training. The purpose of this study was to determine the correlation between acoustic parameters and Electroglottography(EGG) parameters in two groups(ordinary college students vs. classical singing students group). Materials and Methods : The 80 ordinary college students and 65 classical singing students participated in this study by utilizing Dr. speech program to obtain acoustic measurements and physiologic measurements simultaneously. The Pearson correlation coefficient was used to find the correlation between acoustic parameters and EGG parameters in two groups(ordinary college students group and classical singing students group). Results : The results of the study were as follows : First, there was no correlation between Jitter and EGG Jitter in ordinary college students group, but there was strong correlation between Jitter and EGG Jitter in classical singing students group. Second, there was no correlation between Shimmer and EGG Shimmer in ordinary college students group, but there was strong correlation between Shimmer and EGG Shimmer in classical singing students group. Third, there was no correlation between Harmonic to Noise Ratio(HNR) and EGG HNR in ordinary college students group, but there was strong correlation between HNR and EGG HNR in classical singing students group. Finally, there was no correlation between Normalized Noise Energy(NNE) and EGG NNE in two groups.