• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.287-287
• /
• 2018

우수관거 시설에서 맨홀은 관거의 접합을 위해 반드시 설치되어야 하는 중요한 요소이다. 이러한 맨홀 접합부에서는 유입관으로 유입되는 유량의 급격한 확대와 유출관으로 배수되는 유량의 급격한 축소 등 흐름의 복잡한 변화가 발생한다. 맨홀에서의 복잡한 흐름은 설계강우를 초과하지 않는 강우량에서 과부하 조건을 형성하며 도심지 침수의 심각한 영향을 미친다. 특히 여러 관이 접합되어 있는 합류맨홀의 경우 유출관거로의 원활한 배수가 유도되지 않을 뿐 아니라 다양한 방향의 흐름이 서로 상충하며 급격한 에너지 손실을 유발한다. 도심지 중 하류부에서 주로 발생하는 침수피해는 복잡한 우수관거 시설의 구성에 따른 합류맨홀의 증가로 인해 그 규모가 늘어나는 추세이다. 바닥이 평평한 기본형태의 맨홀에서 발생되는 과부하 흐름과 여러 유량 조건에서의 에너지 손실에 관한 연구는 지속적으로 수행되어왔다. 최근 맨홀 내부에 흐름을 유도시켜주는 인버트를 설치하여 에너지 손실을 저감하려는 연구가 활발히 이루어지고 있지만 이를 실제 도시지역에 적용하여 침수해석이나 관거 배수능력 평가를 수행하기 위한 필요한 기초자료는 미비한 실정이다. 본 연구에서는 인버트가 설치된 개선형 4방향 합류맨홀의 유량 조건을 다양하게 변화시키며 유입유량 조건에 따른 개선형 맨홀의 손실계수를 분석하였다. 유량 조건은 세 개의 유입관에서 각각 설계유량 $1{\ell}/s$의 유량이 유입되는 총 유입유량 $3{\ell}/s$를 기준으로 각 유입관의 유입유량을 10%씩 변화시킨 40case의 유량 조건을 선정하였다. 이렇게 선정된 유량 조건은 경우에 따라 중간 맨홀, 3방향 합류맨홀 또는 4방향 합류맨홀의 흐름을 다양하게 나타내었으며, 40case의 손실계수를 분석하여 모든 맨홀 접합 조건에서의 손실계수를 파악할 수 있었다. 합류맨홀에서의 개선형 인버트 적용성을 확인하기 위하여 인버트가 설치된 개선형 맨홀에서 산정된 손실계수를 기초로 모든 유입유량 조건에서 적용이 가능한 손실계수 범위도를 작도하였다. 손실계수 범위도는 통계분석에 활용되어 개선형 맨홀의 유입유량 조건에 따른 손실계수 산정식을 도출하는 기초자료로 활용되었다. 이와 같이 도출된 산정식을 적용하면 실제 도심지에 개선형 맨홀을 적용하였을 경우에도 정확한 침수 해석이나 관거 배수능력 평가가 가능할 것으로 판단된다.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.272-275
• /
• 2007

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.715-723
• /
• 2007

A displacement-based seismic design procedure was proposed for mid-to-low-rise steel moment frames. The proposed method was totally different from the current R-factor approach in that it directly uses available connection rotation capacity as a primary design variable. To this end, the relationship between available connection rotation capacity and seismic response modification (R factor) was established first; this relationship has been a missing link in current ductility-based design practice. A step-by-step displacement-based iterative design procedure was then proposed and verified using inelastic dynamic analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.85-92
• /
• 2018

In order to use glued built up timber beam as a structural member for post and beam construction, it must be possible to manufacture long-span lumber. In this study, the researchers conducted a performance evaluation for longitudinal bonding of lumber (cross-section $89{\times}120mm$) made from larch. The specimens were prepared in six different forms using the longitudinal bonding method. The bonding strength of these specimens was tested through tensile strength tests and bending strength tests. The tensile strength test result of the longitudinally bonded parts was better than that of the double lap specimens. And, the tensile strength value of the scarf specimen was better than that of the hooked scarf specimen. The tensile strength of the GFRP (Glass Fiber Reinforced Plastic) rod insertion bonding specimen was 3.6 MPa, which was the highest. As for the bending strength test result of the longitudinally bonded part, the average MOR (modulus of rupture) of the specimen where a GFRP rod was inserted and bonded measured 29 MPa, while the specimens of other bonded parts showed a MOR no more than 11 MPa. Toughness destruction was observed in specimens where a GFRP rod was insertion-bonded. The rest of the specimens showed brittle destruction. The average MOR strength of the Rod + Lap specimen was 30.5 MPa, which was the highest among all longitudinally bonded specimens. The bending strength of the Rod + Lap specimens showed an effective strength that was 66% of that of the control group which were not longitudinally bonded.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.223-233
• /
• 2011

A ceramic monolithic catalyst is a honeycomb structure that consists of two layers. The honeycomb structure is regarded as a continuum in structure and heat-flow analysis. The equivalent mechanical properties of the honeycomb structure were determined by performing finite element analysis (FEA) for a test specimen. Bending strength experiments and FEA of the test specimen used in ASTM C1674-08 standard test were performed individually. The bonding coefficient between the cordierite ceramic layer and the washcoat layer was almost zero. The FEA test specimen was modeled on the basis of the bonding coefficient. The elastic modulus, Poisson's ratio, and the thermal properties of the ceramic monolithic substrate were determined by performing the FEA of the test specimen.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.551-559
• /
• 2003

In steel frames, the analysis and design techniques are based on either idealized fixed or pinned connections. In this case, it has the advantage that the structural analysis and the design procedure were simplified, but there could be given different results of analysis between the real steel frame connections and the idealized fixed and pinned connection. This is because the real connections would be analyzed by semi-rigid, and have some transfer of moment and rotational constraint about the loads. In this study, structural analysis program with considered connections that have joint rigidity of fixed, pinned and semi-rigid, was developed. Then, the effects of joint rigidity on strength and displacement. in steel frames subjected to lateral forces and axial forces, were investigate, and the results were compared with those of the Midas Gen. w program.

• Proceedings of the KWS Conference
• /
• 1990.11a
• /
• pp.148-152
• /
• 1990

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.1-8
• /
• 2008

The lateral strength test of bending type was done to investigate the lateral capacity of the double bolt connection of domestic larix glulam according to bolt spacing. In the shear specimen, which is bolted connection in the inserted plate type, the hole of bolt was made, changing the diameter of bolt (12 mm and 16 mm), the number of bolt (single bolt : control and double bolt), the direction of bolt row (in parallel to grain : Type-A and in perpendicular to grain : Type-B) and the bolt spacing (Type-A : 4 d and 7 d and Type-B : 3 d and 5 d). Lateral capacity and failure mode of bolt connection were compared according to conditions. In prototype design (KBCS, 2000), the reduction factor of the allowable shear resistance that the bolt spacing is reduced was calculated. The results were as follows. 1) Bearing stress per bolt in the single and double bolt connection of Type-A was directly proportional to bolt diameter and bolt spacing. Bearing stress of Type-B decreased as bolt diameter was increased, and decreased by 2~10% when bolt diameter was increased. 2) In the single bolt connection and the double bolt connection of Type-A, the splitted failure was formed in the edge direction. When the bolt spacing was 3 d in Type-B, bolt was yielded more in the part of tension than in the part of compression, and the splitted failure started at the bolt in the part of tension. In the 5 d spacing specimen, the bolt in the part of tension was yielded similarly to bolt in the part of compression, and the splitted failure started in the part of compression. 3) In the prototype design, the reduction factor was calculated by non-dimensionizing the yielding load in the standard of bolt spacing (Type A : 7 d and Type B : 5 d). In 12 mm bolt connection, the reduction factor of bolt spacing 4 d (type-A) and single bolt connection was 0.87 and 0.55, respectively, and the reduction factor of bolt spacing 3 d (Type-B) and single bolt connection was 0.91 and 0.55, respectively. In 16 mm bolt connection, the reduction factor of bolt spacing 4 d (type-A) and single bolt connection was 0.96 and 0.76, respectively, and the reduction factor of bolt spacing 3 d (Type-B) and single bolt connection was 0.91 and 0.77, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.67-74
• /
• 2016

The yield shear strength of bolt connection in glass fiber reinforced glulam was predicted using a design-based equation, and was compared to the empirical yield shear strength. For the predicted equation, the mechanical properties of member (the elastic modulus, Poisson's ratio, shear modulus) was tested. The fracture toughness factor ($K_{ft}$) of glass fiber reinforced glulam was reflected to the revision of the design equation of bolted connection. The compressive strength properties to grain direction was influenced by annual ring angle and width of lamina. Compared with the revised yield shear strength of reinforced glulam, it was tended to be similar to the empirical yield shear strength on the diameter of bolt and the reinforcements. The revised yield shear strength from proposed formula of KBC was most appropriately matched in the bolt connection of the glass fiber reinforced glulam.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.565-574
• /
• 2004

The purpose of this paper was to investigate the block shear and the fracture in the net section, according to AISC Specifications, by analysing the shear lag effect in the block shear rupture of the single angle with three or four bolt connection. Specimen with three or four bolt connections showed that failure generally went from block shear with some net section failures to classic net section failures. From the test results, showed that the connection length, the thickness of angle, and reduction factor, which affect the block shear rupture, were investigated. According to the test results, it is suggested that the calculation of the net section rupture capacity by using the reduction factor of U, that was suggested by Kulak, is needed.