• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.332-339
• /
• 2013

The network nodes in a tactical network moves continuously and due to the physical and electronic obstacles, the connections are not always available. Due to the frequent disconnections, it is hard to discover the path among the nodes in a DTN. According to PROPHET(Probabilistic Routing Protocol using History of Encounters and Transitivity), one of the most well-known DTN routing protocols, a DTN node determines whom to forward a packet according to the packet delivery probability. From the viewpoint of a node, the packet delivery probability of another node is degraded while the nodes are disconnected whereas it is improved when they encounter. In this paper, we enhance the algorithm estimating the packet probability by considering the encounter count as an additional parameter. Our algorithm prefers the node that encounters the destination more frequently in selecting the next hop toward the destination. We evaluated the performance of our algorithm by simulating military operations using a DTN-dedicated simulator. Through the simulations, we show that our proposed algorithm achieve higher packet delivery ratio with similar overhead compared with PROPHET.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.165-165
• /
• 2009

현재 반도체나 이동통신 분야는 사용자의 요구에 따라 PCB의 회로선폭이 갈수록 좁아지고 있다. 이러한 정밀 부품을 제조하기 위한 제조공정에서 각광받기 시작한 기술 중 하나가 대기압 플라즈마 기술이다. 본 연구에서는 미세패턴 형성이 가능한 에폭시 본딩 필름위에 무전해 도금공정을 통한 패턴 도금법을 이용하여 패턴을 형성하였고, 형성된 패턴에 대기압 플라즈마 처리 횟수에 따른 접촉각(Contact Angle)과 Peel Strength의 변화를 분석하였다. 또한 에폭시 본딩 필름을 이용한 Build-up공정을 거쳐 Micro Via를 형성하여 대기압 플라즈마 처리 횟수에 따른 Via 표면을 분석하였다. 대기압 플라즈마 기술은 진공식에 비해 소규모 장비를 이용한 전처리가 가능하고, 초기 설비비용을 절감하는데 탁월한 효과가 있어 널리 사용하는 기술 중 하나이다. 이 연구를 통하여 대기압 플라즈마 처리 횟수에 따른 표면에너지의 변화로 인한 접촉각이 좋아지는 것을 알 수 있으며, 대기압 플라즈마 처리를 한 패턴표면이 친수성으로 변하면서 현상된 드라이 필름 사이로 도금액이 원활히 공급되어서 미세패턴 모양이 우수하게 구현되었음을 알 수 있었다. 또한 Via Filling에도 뛰어난 효과가 있었음을 확인할 수 있었다.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.141-146
• /
• 2012

The rail surface defects which are generated on repeated rolling contact fatigue are getting increased according to high speed, high density, and minimum weight. In addition, Increasing noise and vibration are affected by these also impact load generated as well. Because of this phenomenon, more serious and critical damages were occurred. In fact, in order to control them, the rail grinding amount in Korea. This study evaluated how depth of hardening on rail surface is formed and suggested optimal rail grinding amount by RCF(rolling contact fatigue) test with generated contact pressure between KTX wheel and UIC60 rail by applying FEM analysis. Therefore, the amount was generated approximately 0.2mm/20MGT to maintain integrity of rail surface by getting rid of depth of hardening on rail according to rail accumulated passing tonnage.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.123.2-123.2
• /
• 2011

$ALU^+$ 태양전지는 PN접합을 후면에서 즉, Al을 소성하여 형성시키기 때문에 얼마나 균일하고 두껍게 형성하는 것이 가장 중요하다. 소성(Firing)은 태양전지 제조 과정에서 후면의 접촉을 위한 중요한 공정이다. 본 연구에서는 상업화가 가능한 n-type $ALU^+$ Emitter 태양전지에서 소성 횟수에 따른 특성을 연구 하였다. $ALU^+$ emitter 형성의 최적화를 위해 소성온도를 가변하고, 최적화된 온도에서 소성 횟수에 따른 DIV 측정을 통해 셀을 분석 하였다. 소성 횟수는 1~3회로 하였고, 그 결과 단락전류 밀도(Jsc)가 33.57mA/$cm^2$로 처음보다 15.1%증가 하였고, 곡선인자(Fill Factor)는 3회에서 66.04%로 218%증가 하였다. Al을 짧은 시간 안에 소성을 시키므로 해서 후면의 $P^+$ Emitter가 균일하게 형성되었기 때문에 개방전압(Voc)의 증가를 확인하였다. 본 연구를 통해 $ALU^+$ 태양전지의 후면 Aluminium 소성 조건의 최적화를 통하여 $ALU^+$ emitter가 충분히 형성되지 못하면 누설전류가 발생되고 직렬저항(Rs)이 크게 증가하여 개방전압(Voc) 및 단락전류밀도(Jsc)의 감소가 발생하게 되고, 직렬저항(Rs)의 증가와 병렬저항(Rsh)의 감소는 Fill Factor의 급격한 감소를 초래하게 됨을 알 수 있다. 이를 개선하면 태양전지 효율을 상승시키는 결과를 얻을 수 있음을 확인하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.147-154
• /
• 2008

Weathered soil slope loses its shear strength if it is exposed in the air for a long time or in contact with water. And this kind of strength loss is remarkable in dam slope which has very big difference in water level according to the season. In this study, shear strength loss of weathered soil due to saturation had been found out through dryness and wetness repetition direct shear test. Also relation between penetration blow number(Nc) and shear strength parameter had been found out through small sized dynamic cone penetration test device and the correlation equation of Nc had been proposed through artificial neural network analysis to estimate shear strength parameter easily.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.362-376
• /
• 2019

In this study, hydrophilic coating characteristics of PVDF [poly(vinylidene fluoride)] hollow fiber membranes with flower type cross-section prepared by thermally induced phase separation were studied. The hollow fiber used in this study was provided from PureEnvitech Co. Ltd., and the hydrophilic coating experiment was performed with different concentration and number of coating of PEBAX 1657, 2533 and 3533 block copolymer solution using a dip coating method. The hydrophilic coated hollow fiber membrane was characterized to scanning microscope and contact angle measurements to determine the degree of hydrophilization. As a result of SEM characterization, it was confirmed that the thickness of the coating layer increased as the coating concentration increased and the number of coatings increased. Contact angle of surface of hollow fibers decreased as the concentration of the coating solution increased and the number of coatings increased. Gas permeance of oxygen gas was measured for the application of the hydrophilized hollow fiber to Membrane Areated Biofilm Reactor. As a result of gas permeation test, it was confirmed that gas permeance decreased with increasing coating concentration and number of coatings, and the more hydrophilized hollow fiber coated with PEBAX 1657 showed lower gas permeance than those coated with PEBAX 2533 and 3533.

• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.273-281
• /
• 2019

This study aimed to qualify the amount of movement during game-based training and competition by using a GPS and to identify the non-contact injury risk in lower extremities for female field hockey enrolled in Korean national team. A total of 52 players were participated in this study and their GPS data collected during training and competition were averaged for 1 week and 4 weeks. And then, an injury risk in lower extremities was calculated for each category of the amount of movement in GPS variables that were related to non-contact injury. In forwards, the injury risk was the lowest in the moderate-low category of total distance covered and repeated high-intensity effort bout and the high category of high intensity distance for 1 week, but the risk decreased as the amount of high intensity distance increased for 4 weeks. In midfielders, the injury risk was the lowest in the low category of total distance covered, high intensity distance, repeated high-intensity effort bout and deceleration bout for 1 week.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.302-311
• /
• 2021

This study uses traditional lacquer techniques to coat the metal surface and evaluates its physical properties to check the applicability of the lacquer coating. For this purpose, a total of six specimens were produced by setting the variation conditions for the number of times (1, 2, 3) and the heating temperature (120℃, 150℃) using SS275 metal(60*60 mm) and 'Wonju lacquer'. For analysis, chromaticity measurements, contact angle/surface energy measurements, Chemical Resistance, and cross-cut tests were used. The analysis showed that the corrosivity was improved and the adhesion of lacquer to the metal surface was excellent. There was no significant change in contact angle/surface energy. Also, there was no significant difference in color. Through this study, it was confirmed that lacquer on metal surfaces improves waterproofing and has a anticorrosion effect. We could also check the proper number of lacquer and heating temperature. Additional physical characteristics such as hardness and wear rate should be studied. It is also necessary to study how lacquer can be painted with a certain thickness.

• Journal of agriculture & life science
• /
• v.50 no.5
• /
• pp.183-188
• /
• 2016

This experiment was conducted to investigate the effects of artificial insemination(AI) frequency on reproductive performance of sows. A total of 48 F1 sows(Yorkshire×Landrace) were allocated to 1 of 4 treatments using completely randomized design(CRD). Four experimental treatments were AI frequency from one to four times(AI1, AI2, AI3, AI4) respectively. Estrus detection was done at approximately 09:00 and 21:00 daily by applying back pressure to females with the presence of a mature boar and the weaning to estrus interval(WEI) of all sows were 5~6 day. Sows detected in estrus were mated at 12 hour after and mating interval was 12 hour by treatments. This experiment demonstrated that the lowest farrowing rate was observed AI3 treatment. Frequency of AI did not influence on reproductive performance when WEI was 5-6 day. No significant differences were observed on litter size, born alive and litter birth weight. Consequently, decreased AI frequency did not have any detrimental effect on reproductive performance when estrus detection was adequate. Decreased AI frequency could reduce cost of production of pigs when sows showed normal reproductive performance.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.5
• /
• pp.199-203
• /
• 2004

Feasibility of 3Y-TZP for dental implant abutment was evaluated under the Hertzian cyclic fatigue by examining the extent of the indentation damage and strength degradation. Fatigue test was conducted at contact loads of 500 to 3000 N and up to $10^6$ cycles in exact in vitro environments. At 500 N, no strength degradation and crack generation was observed up to $5\times10^5$ contact cycles. As load rose, the dramatic reduction in strength was observed when the damage transition from ring to radial crack occurred. The. extent of strength degradation was more pronounced in vitro environment probably due to chemical corrosion of artificial saliva through cracks introduced during large numbers of contacts.