• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.52-61
• /
• 2020

The natural change of winter night temperature from 00:00 to 04:30 O'clock with the different height of thermal screen in a venlo type glasshouse (W59×L68×H5.9 m) was studied using computational fluid dynamics (CFD). At the early stage of CFD analysis, the room temperature decrease of glasshouse with the 5.9 m height of thermal screen were faster than it with the 4.1m height of thermal screen, but at 2 hr after analysis it was slower than in it with the 4,1m, the temperature difference was 0.6℃ after 4 hr. If we consider that turn on the heater when the temperature were decrease below 13℃ at 1hr after CFD analysis, it is good for energy saving in the glasshouse with the 4.1 m height of thermal screen rather than in it with the 5.9 m height, because of the temperature decrease were slow during 2 hrs after analysis. The airflow at the height of 2 m which were grown tomato were fast and wide in the glasshouse with the 5.9 m height thermal screen rather than in it with the 4.1 m, the speed difference was 0.034m·s^-1 at 1hr after CFD analysis. The effect of temperature decrease in summer season were compared with the different height of shading screen from 12:00 to 14:30 O'clock. The height of shading screen were 5.7, 3.9 m, the gap of it were 30%. The air-inflow quantity by the fan with duct at lower part of venlo glasshouse was 0.67 ㎥·s^-1 until 1hr and to increase 3 times of it from 1hr after analysis. The roof window were open 100%. Until 1hr of CFD analysis, the temperature in the 30% open of shading screen was 0.9℃ higher than in the none shading screen. From 13:00 O'clock when the air-inlet quantity to increase 3 times, the temperature in case 30% gap of shading screen were decreased compare with the none shading screen, the temperature difference was 0.5℃ at 14:30 O'clock. The temperature on the floor surface in case 30% gap of shading screen were lower with it's height increase, the temperature difference was 8℃ compare with none shading screen. The relative humidity difference were insignificant by the height and gap of shading screen.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.1
• /
• pp.11-17
• /
• 2003

pH value of sampled fogwater at source regions (above highway and road) in Yongin sites showed the lowest value and was increased after passing the forest stands. Changes of ion concentrations through the forest stands showed a lowering tendency at sampling sites. The fogwater passing the forest stands (Quercus mangolica and Pinus rigida) surrendered acid pollutants to crown and stem from the atmosphere. It was concluded that environmental moisture in the atmosphere is acidified in fogwater. The influence was extended to the pure zone, and the frequency of acid rain has increased. The forests are assumed to remove air pollutants because ion concentrations in fogwater decreased after passing the forests. The fogwater which functions as a local sink for pollutants (H$_2$SO$_4$, HNO$_3$, etc.) falling on plant surfaces is considered to effectively remove acid pollutants. But if the deposition of pollutants exceeds the capacity of purification, it would damage the forest ecosystem. Further investigation is necessary to identify tree species tolerant to acid pollutants.

• Journal of Science of Art and Design
• /
• v.5
• /
• pp.175-216
• /
• 2003

시각이 아닌 오감체계에 관계하는 때문에 현대미술은 외관만으로 이루어지지 않는다. 곧 예술 작품들은 하나의 장소를 관객에게 제공하여, 심리적, 물리적, 또는 예술이 존재여부에 관한 갖가지 질문들을 제기한다. 모든 예술 작품은 메시지를 담고 있다. 이러한 관점에서 개념 또는 아이디어에 우선하는 현대미술은 그들의 메시지를 전달하기 위해 우리의 사회적 배경과 보편성을 간과할 수 없다. 우리의 물체 인식은 결국 우리의 경험체계를 통해서 이루어진다고 간주하면, 현대미술의 새로운 형태는 보편적 특질들이 그 특질들 이상의 상태로 보여지도록 유도한다. 이러한 창조 행위의 시작은 현대인간의 문화 읽기이며 문화는 인간과 자연의 긴밀한 관계 속에서 이루어진다. 역사는 지나간 시간을 기록한 것이며, 이 또한 우리의 지식과 정보 체계에 속한다. 회화가 평면에 입체감을 표현하는 것과는 달리 조각은 자연 속, 즉 실재공간 속에 있는 모든 것을 표현하기 때문에 시각(visible) 이외에도 촉각(tangible)이 관여하게 된다. 조각의 특수성은 촉각(tangible)이 우선하는 것이다. 그러나 시각과 촉각은 매우 적극적으로 미학적 경험에 참여하는 감각으로 이들을 서로 분리하여 생각하기가 무척 힘들다. 왜냐하면 어떤 경험에 있어서 기억연합 또는 감각 연합에 의해 하나의 감각이 다른 여러 감각을 촉발하여 연쇄반응 혹은 '형태 Gestalt'를 이루기 때문이다. 대부분의 근대 조각 작품들은 조각대 위에 고정되어 있는 구상 형태를 지녔기 때문에 조각작품 자체가 지닌 외적 형태와 그 자체내의 공간이 더욱 중요한 역할을 하게 된다. 말하자면 미로의 비너스 조각은 대리석과 비너스 형태의 결합이다. 때문에 관객은 그 주변을 돌면서 우리 신체의 내적 공간과 시각에 의존하면서 그 작품의 중량감, 양감, 형태 등의 특질과 만나게 된다. 그러나 현대 추상조각과 개념조각은 이보다 좀 더 확장된 공간을 제시한다. 이것은 현대조각이 건축개념을 수용한 때문이며, 그것이 때로는 안 쪽에서 때로는 바깥 쪽에서 그 형태를 결정하며, 보고 듣고 느끼고 만져지고 왕래하는 등의 인식 영역인 관객의 오감체계에 직접적으로 관계하기 때문이다. 우리는 건축 공간에서, 시각 외에도 청각이나 촉각을 통해 지각한다. 대강 요약하자면 공간은 객관적 상태이기보다는 인식영역의 주관성을 통해 받아들여진 우리가 지나쳐온 것들이나 체험된 공간이다. 여기서 '받아들여지는' 일은 과거 경험들의 주체들, 언어와 문화에 의해서 이루어져야 한다. 건물, 즉 둘러싸고 있는 공간은 중앙이 아니다. 중앙은 바로 나, 둘러싸여진 나이다 나는 나의 동작에 따라 그 공간의 시스템을 변화시킬 수 있는 유동적인 중심이다 (이때의 나는 위치의 축을 변화시키는 것이 아니라, 그들을 탐색하는 것이다). 작품이 대형화되면서 이러한 건축공간개념이 현대 조각가들의 작품개념에 이용되었다고 본다. 현대미술에서 In situ작업과 특정한 장소를 위한 기획되어진 최근의 프로젝트 작업들은 대형화되어있으며, 건축에서처럼 특정한 장소를 만들어낸다. 로잘린드 크라우스(Rosalind Krauss)는 또한 '조각영역의 확장 (La sculpture dans le champ elargi)'에서 현대조각이 건축과 환경의 영역을 침범하고 있음을 지적한다. 그녀에 의하면, 1960년대 이후의 현대조각은 이러한 탈 귀속성과 조각의 자율성을 획득함으로써 조각은 건축물이 아니면서 건축물 주변에 위치하거나 풍경이 아니면서 풍경 안에 자리잡게 되었다. 이와 같이 현대의 대형조각 작품들 - 예를 들어 대형화된 미니별 조각이나 개념미술, 또는 대지예술 등 -은 풍경의 실재가 아니기 때문에 환경으로부터 구분된다고 언급하고 있다. 이들 조각은 더 이상 만져지는 실체이거나 점유하는 공간의 상징언어를 지닌 조각의 범주에 한정되지 않게 된다. 조각과 건축의 공간인식을 인체의 크기와 관련하여 보면, 메를로 퐁티(Merleau-Ponty)의 '지각의 현상학' 은 우리가 논하는 작품의 공간체계를 분석하는데 지침표가 되어준다. 메를로 퐁티가 말하는 지각은 정신에 의해서만 이루어지는 것이 아니며, 몸과 함께 이루어지는 현상이다. 지각은 우리가 부단히 눈을 움직이고 만지고 냄새를 맡고 주변을 돌아 다니면서 세계와의 직접적인 접촉을 통해 이루어 진다. 몸의 움직임을 통하여 나타나는 신체적 표현은 몸 자체가 원천적으로 지향적 활동의 주체로서 파악되는 한 이미 항상(恒常, constant) 의미 현상을 지니다. 우리의 지각이 움직이는 몸의 지향 활동을 통해 이루어진다는 것은 우리의 몸의 지향활동이 의식에 선행함을 의미한다. 몸의 움직임은 의식의 의도를 표현할 때에만 의미를 나타내는 기호가 되는 것이 아니라, 이미 그 자체가 살아있는 표현이다. 우리의 몸짓, 표정은 우리 의식이 의도하기 전에 이미 의미가 담겨있다. 몸은 그 자체가 기호(Signe)적이다. 결국. 메를로 퐁티에게서 세상(le monde entier)은 그 자신이 주체가 되어 인식한다, 그리고 이 인식 구조에는 우리의 몸이 구심점(le point centripete)이 된다. 만약 우리가 이러한 메를로 퐁티의 개념을 염두에 둔다면, 예술작품의 특성에 매우 중요한 역할을 하고 있는 재료와 크기를 이해할 수 있을 것이다.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.311-321
• /
• 1995

This study was undertaken to investigate the distribution of the chewing side preference and variations in the maximum bite force and facial morphology according to chewing side preference since unilateral chewing may cause morphologic and functional anomalies. 50 dental students who had no signs or symptoms of masticatory system and Angle's Class I relationship in posterior segments were selected, and divided into two groups, that is, 25 in bilateral chewing group(19 male and 6 female) and 25 in unilateral chewing group(10 male and 15 female). Maximum bite force was estimated ana posteroanterior cephalogram were measured ana statistically analyzed. The results were as follows : 1. Their were more students with bilateral chewing side preference($68\%$) and unilateral chewing side group consisted of right side preference($68\%$) and left side preference($32\%$). 2. There was no significant difference in the strength of max. bite force between the right and left side in bilateral chewing group. The bite force of the chewing side nab greater in the unilateral chewing group but less in the non-chewing side compared to those of bilateral chewing group with Bo significant difference. Max. bite force of chewing side was greater than that of non-chewing side in the unilateral chewing group(Female p<0.05). Max. bite force of males was about twice in that of females in both groups(p<0.05). Max. bite force of chewing side of the unilateral chewing group was similar to that of the bilateral chewing group, but that of non-chewing side was less than that of the bilateral chewing group. 3. In comparison of the facial morphology, there was no statistically significant difference in the size between the right and left side of the bilateral chewing group and between chewing and non-chewing side of the unilateral chewing group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.162-168
• /
• 2012

Purpose: Teeth are generally exposed when people smiling. Moreover, the exposed teeth and soft tissue when smiling becomes an important guideline for esthetically prosthetic restoration. This research is to compare and find out differences of Korean young men's smile living in presence and twenty years ago. Materials and methods: Subjects, 100 young men (50 male and 50 female), were required about several aspects; normally developed physical condition, no psychological or genetic disorders, a fine face with no loss of teeth, no experience in orthodontic or prosthetic treatment, relatively normal occlusion, aged between 20-29. The photos of the subject at rest position and front face when fully smiled were taken three times. 100 photos (50 male and 50 female) were chosen at random from the 240 university students' smile photos taken by Yoon and his colleagues in 1991. By Hulsey's method of measuring smile, several factors; the change of upper lip curvature, the change of the relation between the upper lip and teeth, parallelism between Mx. incisor and lower lip, contact relation between Mx. incisor and lower lip and teeth displayed in a smile, were measured and analyzed. Meanwhile, ten dentists assessed aesthetic evaluation about men and women's smile for twice and recorded and compared smile score. The -test (P<.05) was used to compare the measured value. The difference of smile score was analyzed by t-test (P<.05). Results: The smile score calculated in 2011 (60.22) was higher than that of 1991 (52.80). Among five measurement categories, the noticeable difference was distinguished from two factors; the change of upper lip curvature and contact relation between Mx. incisor and lower lip. Conclusion: The Korean young men's smile has been considerably improved for twenty years. And it is found that the change of upper lip curvature plays an important role, that is, the smile formed with an ascended labial commissure has been increased significantly.

• Applied Microscopy
• /
• v.38 no.1
• /
• pp.21-28
• /
• 2008

Carnivorous plants vary in their unique features of morphology, ultrastructure and biochemical properties by species. Furthermore, prey-capturing mechanism as well as structural and physiological adaptations have been used for grouping various carnivorous species. In Drosera plants, glandular trichomes, which develop in the leaf epidermis, are known to play the most important role during the prey capturing process. The present study examined such trichomes, focusing on the glandular type, in leaves of Drosera anglica using scanning and transmission electron microscopy. Three types of rudimentary glandular trichomes were found to develop within the folded leaf primordia and immature leaf during early development. The first type, stalked glandular trichomes (Type I), occurred on the margin and upper epidermis of the leaf. With maturation, the longest glandular trichomes having lengthy stalks, ca. $2.2{\sim}5.1\;mm$, developed along the margin, while shorter stalked trichomes, ca. up to $200\;{\mu}m$, were found on the inner leaf blade. The shorter ones consisted of a globose head having two layers of secretory cells, parenchyma bell cells and tracheids and a multicellular stalk. The stalks gradually decreased in length in centripetal fashion. The second type, Type II, having ca. $15{\sim}30\;{\mu}m$ short stalks, also developed along the inner blade. Both types secreted mucilage from the secretory cells which had a thin cell wall and cuticle layer. The sessile six-celled glandular trichomes were the third type, Type III, and were $25{\sim}40\;{\mu}m$ in length. They were distributed most commonly throughout the upper and lower epidermis, petiole and even on the stalk surfaces of the first two types of trichomes. The third type was also found to be involved in the active secretion. In prey capturing leaves, all trichome types secreted substances through thin cuticles in the head cell wall, which exhibited relatively loose wall components.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.122-126
• /
• 2007

Expenditure on meat and meat products has been increased in Korea due to the increase of income and the change of diet. From raising farm animals to eating the meat, various hazardous elements can make their ways into the meat and meat products. Recently the issues on food safety and hygiene are drawing a lot of attention, and the current system for managing the safety of foods is still needed to be improved. This survey was aimed to monitor the current situation of country-of-origin labels and hygiene for the meat markets at 4 regions Korea. The survey was performed by collecting samples from whole- sale and retail stores in the nation, which were selling beef. The markets were divided into groups as to territory and the size of the market (Large size, Medium size, and Small size). In terms of size distribution, small butcher shops occupied the highest percentage. On the itemized suitability test of unpacked and packed beef, all the market of 4 regions showed good agreements. However, such labels indicating the methods of cooking and storage were not properly posted on the products. Especially for Ho-nam region, corrections are needed. The results of monitoring sanitation conditions for the butcher shops at 4 regions in Korea showed relatively low suitability. Especially, there were serious lack of knowledge about wearing the sanitation clothing, caps, and shoes. The problem with food safety is so complicated that producer, consumer, food manufacturer, the press, the government, and scholar should solve altogether. It is necessary to educate farmers, food handlers, consumers, etc. and provide them with an accurate information and knowledge.

• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.178-183
• /
• 2005

This study was done to evaluate whether vital bleaching agents could influence on the translucency of the bovine enamel. The anterior bovine teeth that were extracted one day before and without any gross discoloration were obtained and then were preserved in physiologic saline. 6 mm cylindrical tooth specimens were fabricated with diamond puncher perpendicularly on labial surface of bovine tooth. After embedded in transparent acrylic resin with labial surface being exposed, they were cut to a thickness of 1.2 mm with low speed diamond saw (Isomat, Buehler Co., Lake Bluff, IL, USA). They were smoothly ground to 1 mm thickness of enamel with sandpaper. 24 specimens were randomly divided into 3 groups and control group respectively. Opalescence (10% carbamide peroxide, Ultradent, South Jordan, USA), Rembrandt (10% carbamide peroxide, DenMat, USA) and Opalescence F (15% carbamide peroxide with fluoride, Ultradent, USA) were applied on labial sides of the bovine enamel for 7 days (bleaching agents were reapplied every 24 hours) and the opposite surface was contacted to cotton that soaked in distilled water. The control group was soaked in distilled water. Three stimulus value X, Y and Z were evaluated with colorimeter (Color ' Color Differencerneter, Model TC-6FX, Tokyo Denshoku Co., Japan) on the labial surface of all specimen three times on white and black background plate before the bleaching agents were applied and on 3rd, 5th and 7th day after applied. The degree of translucency was normally assessed by measuring the inverse property, opacity (contrast ratio). 10% Opalescence, 15% Opalescence-F, and control group showed no significant variation in the translucency of bovine enamel, However Rembrandt decreased the translucency of it (p < 0.01).

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.1-10
• /
• 1995

All agricultural crops and products should be cultured, harvested, handled and processed by the proper mechanical methods in the mechanized farming systems. Agricultural crops might be injured or deformed through various working stages due to static or dynamic forces of machines. Mechanical forces had to be applied with proper degrees to the agricultural crops in incoincidence with properties of crops without any damage of crops so as to increase the work efficiency qualitatively. Knowledges of mechanical properties of agricultural materials are essential to prevent of agricultural crops in relation with mechanical farming system. This study was carried out to examine and analyze the creep behavior of the rice stalk on growing and harvesting periods by mechanical model with computer measurement system in radial directional compressive force and bending force. The creep behavior of the rice stalk could be predicted precisely and its results approached closely to the measured values. The creep behaviors were increased greatly with increase of compressive force, namely, the steady state creep behavior occurred at the force less then 25N and the logarithmic creep behavior at the force bigger than 30N. The instantaneous elastic modulus $E_o$ and the retardation time ${\tau}_K$ were increased together with increase of applied forces, meanwhile the retarded elastic modulus $E_r$ and viscosity ${\eta}_v$ were decreased with increase of applied forces in mechanical model being expected the creep behavior in relation with the level of applied forces, which was well explained that the rice stalk might be visvo-elastic material. In the creep test along the stalk portion with compressive force and bending force, the intermediate portion showed greatest values and also the lower portion showed the least values, which implied that the intermediate portions of rice stalk were very weak. The steady state creep behavior occured at the intermediate portion and the upper portion in the rice stalk at the compressive force larger than 25.0N, which showed the possibility of injury due to external forces.

• Economic and Environmental Geology
• /
• v.27 no.6
• /
• pp.523-535
• /
• 1994

The strata-bound type iron ore bodies in the Chungju mine are interbedded with metamorphic rocks which are intruded by Mesozoic granitic rocks. The iron ore deposit occurs as layer or lens shape which are concordant with the metamorphic rocks. The iron ore is classified into banded and massive types based on the mode of texture and occurrence. Grain size and iron-oxides tend to become coarser toward massive ore than banded ore. Banded ores commonly contain internal layers defined by alternating magnetite- rich, hematite-rich, magnetite-hematite, and quartz-rich mesobands. The banded iron ore consists of hematite, magnetite, quartz, feldspar, and minor amounts of biotite, muscovite, chlorite, carbonates, epidote, allanite, and zircon. Massive ores which are characterized by high magnetite content occur in contact of granitic rocks. The massive iron ores consist mostly of magnetite and quartz, with minor amounts of hematite, pyrite, microcline, biotite, muscovite, chlorite, carbonates, epidote, allanite and zircon. Magnetite from banded and massive ores is almost pure $Fe_3O_4$ in composition, including 0.14 to 0.27 wt.% MnO and 0.10 to 0.15 wt.% MnO, respectively. Hematite of the ore contains 0.87 to 1.27 wt.% $TiO_2$ in banded ore and 3.44 to 6.96 wt.% $TiO_2$ in massive ore, respectively. Biotite shows a little compositional variation depending on ore types. Biotite of the banded ore has lower FeO, $TiO_2$ and $Al_2O_3$, and higher MgO and $SiO_2$ than the massive ore. The modes of occurrence and petrography of ore implies that massive ores might have been formed either under more reducing environments or higher temperature condition than banded ore. Banded ores might represent early episode of iron enrichment due to regional metamorphism. Massive ores might be related to the contact metamorphism resulting from late granitic intrusion.