• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1122-1123
• /
• 2007

최근 반도체 및 FPD(Flat Panel Display) 산업에서 글라스의 사이즈와 무게가 증가함에 따라 물류 이송 시스템의 전원장치인 비접촉 공진 DC/DC 컨버터의 크기와 용량이 증가하는 추세이다. 또한, 클린룸의 규모가 커짐에 따라 물류 이송 시스템인 Stocker 시스템의 사이즈가 커지고 길이가 장거리화 되고 있다. 이에 생산수율을 높이기 위해 Stocker 시스템의 전체 택타임(Tact Time)을 줄이기 위한 방안으로 차세대 Stocker 시스템의 속도를 증가하도록 요구되어 지고 있다. 따라서 본 논문은 차세대 Stocker 시스템의 속도 증가에 대한 전원장치인 비접촉 공진 DC/DC 컨버터를 제안하고, 제작하여, 차세대 Stocker 시스템의 전체 택타임에 대한 비접촉 공진 DC/DC 컨버터의 제어방법과 효율에 대하여 검증하였다.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.8 no.2
• /
• pp.8-16
• /
• 2011

It is hard and complicated to analytically derive the volumetric-displacement formula of a gerotor pump/motor. Analytical formulas for calculating the volumetric-displacement are derived in this work, which is relatively easy and based upon vane lengths. The vane lengths mean the distances from axis of inner rotor or outer rotor to contact points between inner and outer rotors. Two kinds of formula were studied for two different kinematic motions of rotors. The first one is the case that outer rotor is fixed in space and inner rotor is in mixed motion of planetary revolution and rotation with respect to the spinning axis. And the second is the case that both inner and outer rotors simultaneously rotate. The proposed formula is verified through comparison with volumetric-displacement obtained from numerical CAD calculation.

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.332-338
• /
• 1990

본 연구는 절연유가 금속 파이프 중을 통과할 때 흐르는 유동전류 특성에 대하여 실험적으로 규명하였다. 유동전류는 파이프 길이, 절연유의 속도 및 온도에 따라 변하는 것이 관측되는데 파이프 길이가 4-6cm부근에서 피이크치가 나타나고 유속의 증가에 따라서는 선형적으로 증가하며 그리고 유의 온도가 약 50.deg.C 부근에서 또한 피이크가 나타나고 있다. 절연유에 전하를 주입시키는 수단으로 코로나 방전을 이용하였으며 부코로나 대전된 절연유의 유동전류가 코로나 대전 시키지 않은 절연유나 정코로나 대전된 절연유의 것보다 큰 값이 관측되었다. 이 결과로부터 고체 액체 접촉시 액체중의 음이온이 화학 포텐셜에 의하여 고체 표면에 흡착된다는 사실과 유동전류의 방향 및 발생기구를 해석할 수 있다.

• Parasites, Hosts and Diseases
• /
• v.28 no.3
• /
• pp.161-174
• /
• 1990

The complete life cycle of Spirometra erinacei has been experimentally maintained in the laboratory. The cyclops were reared as the first intermediate host, and the tadpoles of Rana nigromaculata as the second intermediate host. ICR mice were used as another second host. The experimental definitive hosts were dogs and cats. Maturation and hatching of the eggs took 8 to 14 days by incubation at 29℃. The coracidium measured 43.8×36.9㎛. Mesocyclops leuckarti and Eucyclops serrulatus were susceptible to the coracidial infection. The procercoids older than 5 days in the cyclops had minute spines at the anterior end, calcium corpuscles in the body parenchyme and the cercomer at the posterior end. Procercoids 10 to 20 days old were infective to tadpoles, and 15 or 21 day old worms could infect the mice. The plerocercoids from the tadpoles at 15 days after experimental infection were pear-shaped and shorter than 1 mm in the length and were infective to mice. Fifteen to 18 days after experiMental inoculation of plerocercoids to dogs or cats, the adult worms began to produce eggs. One life cycle from egg to egg needed 48 to 67 days in the laboratory. The morphology of larval or adult worms was compatible with the description of Spirometra erinacei.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.4 s.37
• /
• pp.589-600
• /
• 1998

This study was planned to verify the usefulness of Latin square design method in fatigue tests of cables and to see the axial fatigue behavior of wire ropes being used as hangers in suspension bridges. Three parameters : mean stress, stress range. and specimen length, were adopted for verification. The effects of these parameters are in argument except for stress range. Three classes in each parameter were used. Triple replication was performed in each cell to increase the number of replication (or degree of freedoms). The major cause of fatigue failure was fretting fatigue at trellis contact point. Three chosen parameters were proved to be significant. It was verified that the effect of stress range was in agreement with expectation, but the effect of specimen length was contrary to the expectation. It was also observed that the effect of mean stress depended upon the chosen level. Therefore Latin square design method is effective for verifying the parameters that affect fatigue behaviour under orthogonality conditions.

• Journal of Korean Ophthalmic Optics Society
• /
• v.1 no.1
• /
• pp.73-84
• /
• 1996

Satisfactory for children's spectacles fitting can only be achieved with the resonable selection and assortment of frames of different pad shapes, size, materials, the general property of sample frame are flexibility for the temple. Loughness for bridge and variety for the length of temple, a selection of the lens is chosen usually by the characteristic of the power, safty, size and so on, it will be comport fit of frame controlled the hight and width of pad and angle of pad between the nose side, frontal angle of pad will be determinded that whether a frame may be capable of providing a comport fit. An important part of the fitting of spectacles is the final adjustment before the wearer takes them away, and also their continued adjustment to maintain the optimum comport and lens efficiency. It is suggested that spectacle adjustment is essentially a practical art that can only be acquired by continual practice.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.36.2-36.2
• /
• 2011

최근 나노기술의 비약적인 발전을 바탕으로 그 동안 구현이 쉽지 않았던 마이크로-나노 단위의 생체모사(biomimetics) 기술이 큰 각광을 받고 있다. 그 중에서도 특히 연잎 효과(lotus-effect)로 대표되는 접촉각 $150^{\circ}$ 이상의 초소수성(superhydrophobicity) 표면 구현은 생물, 화학, 물질 등의 다양한 분야에 있어 큰 사용가치를 가지기 때문에 연구가 전세계적으로 활발히 진행되고 있다. 초소수성을 가지는 표면을 구현하기 위해서는 표면의 화학적인 조성을 변화시켜 표면의 거칠기를 증대시키는 방법과 표면에너지를 낮추는 방법으로 구분될 수 있으며, 이를 위해 표면에 나노구조체를 형성시켜 표면 거칠기를 증대시키는 방법과 silane 계열의 자가-형성 단일막(Self-assembled monolayer)을 코팅하여 표면에너지를 낮추는 방법이 사용되어 왔다. 그러나 표면에 나노구조체를 형성시키는 과정에서 비싼 공정 비용이 발생하며, 대면적 구현이 쉽지 않다는 단점이 있으며, silane 계열의 자가-형성 단일막의 경우에는 제거가 쉽지 않아 추후 다양한 소자에의 적용이 어렵다는 단점을 가지고 있다. 본 연구에서는 무전해 식각법(Aqueous Electroless Etching)을 이용하여 대면적으로 합성시킨 실리콘 나노와이어의 표면 산소 흡착 처리를 통해 $156^{\circ}$ 이상의 초소수성 표면을 구현하였다. 액상 기반으로 형성된 실리콘 나노와이어의 표면은 열처리 공정을 통해 OH-기에서 O-기로 치환되어 낮은 표면에너지를 가지게 되며, 낮아진 표면에너지와 산화과정에서 증대된 표면 거칠기를 통해 Wenzel-state의 초소수성 표면 성질을 보였다. 변화된 나노와이어의 표면 거칠기는 주사전자현미경 (FE-SEM)과 주사투과현미경 (HR-TEM)을 통해 관찰되었다. 또한, 나노와이어의 길이와 열처리 공정 조건에 따라 나노와이어의 표면을 접촉각 $0^{\circ}$의 초친수성(superhydrophilicity) 특성부터 접촉각 $150^{\circ}$ 이상의 초소수성 특성까지 변화시킬 수 있었으며, 나노와이어의 길이에 따라 표면 난반사율을 조절하여 90% 이상의 매우 높은 흡수율을 가지는 나노와이어 표면을 구현할 수 있었다. 이러한 산소 흡착법을 이용한 초소수성 표면 구현은 기존 자가-형성 단일막 코팅을 이용한 방법에 비해 소자 제작 및 활용에 있어 매우 유리하며, 바이오칩, 수광소자 등의 다양한 응용 분야에 적용 가능할 것으로 예상된다.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.201-205
• /
• 2007

This study was designed to compare the perception of dental hygiene students and general public with respect to minor variations in maxillary anterior tooth size, alignment and their relation to the surrounding soft tissues. Maxillary anterior teeth were intentionally diagrammed in varying degree of deviation with respect to one of three common anterior esthetic discrepancies including variations in crown length, shape of gingival margin, and length of interproximal contact. Seventeen images were generated to be preferentially selected by 2 groups consisting of dental hygiene students and lay people in Busan(total of 216). The obtained results were as follows; 1. Both group preferred gingival margin of lateral incisor to be 0.5mm lower than that of central incisor. 2. Both group preferred the gingival margin shape of central incisor has 1/9 horizontal component of the crown width. 3. Both group preferred length of the interproximal contact has 1/2 of the crown length. The results of this study may be considered to influence the decision making process by dental professionals with respect to designing the anterior esthetic gingival line.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.3
• /
• pp.165-171
• /
• 2023

The rotary joint connecting the upper and lower structures of construction machinery and special vehicles transmits hydraulic pressure as the shaft and housing rotate, and multiple seals are assembled to prevent oil leakage into the oil flow channel. Because the seal material is rigid and difficult to assemble, we sought a method to assemble it after cutting. The shapes of the cutting surface are L-shaped and / shaped, and the leakage standard when hydraulic pressure is applied is the contact pressure generated on the cutting surface. The structure and material of the seal are composed of a double elastomer, and nonlinear contact structural analysis is performed when only the high-rigidity PE material is cut. Studies have shown that the shorter the cutting length, the better the leakage prevention and the higher the possibility of leakage to the bottom surface where NBR and PE come into contact rather than the top surface where the PE and the housing come into contact.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.9
• /
• pp.615-622
• /
• 2017

A normal shock wave is initially formed in the shock tube that migrates towards the closed end of the tube, which, in turn, leads to the reflection of shock. Due to the interaction of the reflected shock with the boundary layer, bifurcation of the shock wave takes place. A shock train will be generated after the bifurcated shock wave approaches the contact surface. Until now, only a few studies have been conducted to investigate this shock train phenomenon inside the shock tube. For the present study, a CFD analysis has been performed on a two dimensional axisymmetric model of a shock tube using unsteady, compressible Navier-Stokes equations. In order to investigate the detailed characteristics of the shock train phenomenon, quantitative studies have been performed by varying shock tube length, diameter under fixed diaphragm, and pressure ratio inside a shock tube.