• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.175-178
• /
• 2001

탄소는 활성탄으로 제조되어 다른 재료와 접촉시에 수분을 많이 흡수하여 콘크리트와 배합시 과정이 활성적으로 진행되는 점을 이용하여 조직이 좀더 밀도 있게 콘크리트 자체의 일부 단점을 보완하여 강도개선 특히 인장강도 개선을 밝히고자 하는데 본 연구의 목적이 있다. 시행착오 방법을 사용하여 콘크리트에 배합을 해나가는 과정으로 배합비를 처음 소량에서부터 점점 증가시켜나가는 방법을 택하였다. 배합에서 비 숙련에 의한 오차를 줄이기 위해서 K 건설레미콘에서 20년 경력자에 의해서 배합관리 되었고 $17^{\circ}$ $\pm$$3^{\circ}C$ 자동온도 조절기에 의해서 양생되었다.(중략)

• Korean Journal of Culture and Social Issue
• /
• v.11 no.spc
• /
• pp.97-115
• /
• 2005

This study investigated the factors that influence the attitude, trust, and acceptance toward the North Korean residents by South Koreans. Three hundred and ninety-two South Koreans, including 222 with no contact experience with North Korean residents and 170 with contact experience, answered a questionnaire. The experience group included police officers who provide protection and settlement service, labor counsellors, social workers, church people, college classmates and tutors, and teachers in alternative schools for North Korean youths. The results indicated that protecting police officers have highly negative attitudes in both cognitive and affective dimensions and also show low trust and acceptance. Teachers in alternative schools, on the other hand, were found to have both positive and negative cognitive evaluations of North Korean residents, but still maintained positive affect and high trust and acceptance. People with no contact experience had negative affect along with pity, and showed medium level trust and acceptance. The distinctive difference between the police officers and teachers were attributed to the individual characteristics such as authoritarian personality and uncertainty avoidance rather than to the frequency or depth of contact. The most important determinant of trust and acceptance were found to be the affective component. The implications of these findings on the selection and training of interface personnel and peace education were discussed.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.30 no.3
• /
• pp.35-42
• /
• 2001

배관 내에 압축공기를 주기적으로 분사하여 맥동현상이 일어나도록 하면서 기포를 발생시켜 기포가 관의 내벽에서 성장하여 파괴될 때 관내에 부착된 이물질을 제거할 수 있고, 또한 세척효과를 높이기 위하여 관의 벽면에 접촉하면서 배출되는 과정에서 이물질을 제거할 수 있는 장치를 이용한 세척방법의 적용성에 대해서 고찰하고자 한다.

• Journal of the Korean Institute of Gas
• /
• v.11 no.1 s.34
• /
• pp.34-39
• /
• 2007

In this paper, the FEM result has been presented for a sealing safety between a valve packing and a valve seat during a open and close operation in a LPG cylinder. The sealing operation of a LPG valve is completed when the valve packing in which is made by a nylon-66 polymer is to stop a LP gas flow, which flows out from the outlet of a brass pipe in a LPG cylinder. The contact sealing mechanism of the valve may be classified by a flat contact of an unused valve packing and a circular groove contact of an used valve packing in a current LPG valve. Based on the FEM and experimental investigations the sealing force, 4.9 MPa for a flat contact mode of the unused valve packing is a little high compared to that of the used valve packing, which shows a circular groove contact geometry against a valve seat. But these sealing pressures for two contact modes are very low compared to the ultimate strenath 83 MPa of the nylon-66 and this may be designed with a excess strength of the valve.

• The Journal of the Korea Contents Association
• /
• v.14 no.1
• /
• pp.409-422
• /
• 2014

This paper examined the influence of employees' social regard toward the customers, such as, overall service quality, service satisfaction, and service loyalty. The paper proves that the high contact beauty services and the low contact fast-food services have different customer satisfaction level depending on the employees' social regards. A survey study was conducted to collect the data with the actual service purchasers at domestic beauty services and fast-food services. Analysis of structural equation modeling with Amos 18.0 was performed to test the research hypothesis. The results of the study are as follows: First, social regard has positive influences on service quality, service satisfaction, and service loyalty. Second, Social regard has more effect on service satisfaction in a high contact beauty services than in a low contact fast-food services. This paper contribute to identify the effects of employees' social regard on service satisfaction, by comparing the effects on service satisfaction between high and low contact services.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1992

A method analizing contact pressure between plate and elastic half space is presented by using F.E.M. With the method, the pressure intensities at surface nodes of half space cae be directly calculated by using flexibility matrix of half space. The method is originally presented by Y.K. Cheung et al.(3) Insted of Y.K. Cheung's method, which use a conception of equi-contact pressure area around each surface nodes of half space in the noded rectanqular element area. We use the equi-contact pressure area around the Gaussian integration points of half space surface in the noded isoparametric element area. Numarical examples are presented and compared with other's studies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1627-1633
• /
• 2011

Injection molds are generally fabricated by assembling a number of plates in which the core and cavity components are assembled. This assembled structure has a number of contact interfaces where the heat transfer characteristics are affected by thermal contact resistance. In previous studies, numerical approaches were investigated to predict the effect of thermal contact resistance on the temperature distribution of injection molds. In this study, thermal-fluid coupled numerical analyses are performed to take into account the thermal contact effect on the numerical evaluation of the mold filling characteristics. Comparisons with experimental results show that the proposed coupled analysis provides more reliable results than the conventional analyses in predicting the mold filling characteristics by taking into account the effect of thermal contact resistance inside the injection mold assembly.

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.62-68
• /
• 1997

In the first part of the paper, the crack growth process in rolling contact fatigue has been investigated on ring type plate specimens, in which crack growth is two dimensional and cracks are observed on the side surface of the specimens. The results have shown that cracks are initated from the contact surface in tensile mode in the direction approximately normal to the contact surface and after some short length of growth, shear mode growth occurs from the tip of the crack and it grows until the separation of the surface layer, namely flakung type failure, occurs. In the second part, mode U fatigue crack growth tests have been made by using an apparatus designed based on the concept that the subsurface fatigue crack growth in rolling contact fatigue is the mode U fatigue crack growth under the stress state where the tensile mode growth is suppressed by compression stress. The rest results have shown that the mode U fatigue crack growth occurs if the superposed compression stress is enough to suppress the tensile mode growth.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.104-112
• /
• 2015

Non-contact surface wave transmission (SWT) measurements are used to evaluate the depth of a surface-breaking crack in concrete slabs. The author propose a measurement model that includes an appropriate configuration of the source and receivers, and a transmission function for the given configuration. A series of numerical simulations using a 3D finite element model is used to obtain the transmission function. Then, validity of a proposed model is verified through experimental studies. Two air-coupled sensors are used to measured surface waves across surface-breaking cracks with varying depths from 0mm to 100mm with intervals of 10mm in a concrete slab ($1500{\times}1500{\times}180mm^3$) in laboratory. As a result, the proposed method is demonstrated as to be effective for charactering the depth of a surface-breaking crack in concrete bridge deck with an average error of 10%. A discussion on practical applications of the proposed method is also included in this article.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.1
• /
• pp.52-64
• /
• 1997

Pelitic rocks of southwestern Nova Scotia have been affected by widespread contact metamorphism due to the intrusion of the Shellburne Pluton, with aureole up to 15 km wide. Well-preserved pseudomorphic textures indicate that common staurolite and andalusite metacrysts formed at the expense only of plagioclase, muscovite and biotite. Excess components (K, Na and Ca) from such replacement reactions imply extensive metasomatism throughout the contact aureole. Modal analysis of a typical andalusite-bearing rock indicates a one-to-one volume ratio of product to reactant. However the products of the replacement reactions contain approximately three times more aluminum than the reactants, indicating that the regional metasomatism also involved aluminum.