• Polymer Science and Technology
• /
• v.22 no.3
• /
• pp.230-236
• /
• 2011

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.231-234
• /
• 2016

Pouch film is manufactured by laminating aluminum foil, polyamide film and polypropylene film with an adhesive or extrusion resin. However, a surface treatment is required for the aluminum because bonding does not occur easily between the aluminum foil and the polymer film. Thus, for this study, surface treatment experiments were performed in order to confirm the effect on adhesion strength. First, a variety of surface treatment solutions were coated on aluminum foil, and contact angle and surface morphology analysis was carried out for the surface-treated aluminum. For lamination of the surface-treated aluminum foil with polyamide film, a polyurethane base adhesive was prepared for the adhesive strength test specimens. The adhesive strength between the aluminum foil and the polyamide film of the resulting specimens was measured (UTM). With such an experiment, it was possible to evaluate the effect on adhesive strength of the various surface treatments.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1184-1190
• /
• 1997

Corn zein coated carrageenan films were manufactured by immersing preformed ${\kappa}-carrageenan$ films into solution of different concentrations of corn zein (CZ) solids (10, 20, and 30% in 95% ethyl alcohol) with polyethylene glycol (20% w/w of CZ), glycerol (24% w/w of CZ). For all types of films, water vapor permeability (WVP), water solubility (WS), swelling ratio (SR), tensile strength (TS), percent elongation at break (E), heat sealing strength (HS), and Hunter color values (L, a, and b) were determined. WVP of corn zein coated ${\kappa}-carrageenan$ films decreased significantly (p<0.05) as the concentration of com zein increase. Coating with corn zein also decreased film WS and SR linearly with the concentration of corn zein. TS of corn zein coated carrageenan films decreased linearly with corn zein concentration. All the com rein coated carrageenan films showed heat sealing properties even though their sealing strength was less than half of corn zein film. Obviously corn zein coating affected color of ${\kappa}-carrageenan$ films, which was mainly caused by increase in yellowness (Hunter b-value).

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.158-163
• /
• 1999

The quality change of black rice during storage at $20^{\circ}C$ was measured to determine a packaging material for black rice storage, using polyethylene film (PE), polypropylene film (PP) and laminated film with PE and PP (PE/PP). Water activity of black rice was 0.642 at initial time and changed little in 8 months during storage at $20^{\circ}C$. Acidity of black rice was 25 mg KOH at initial time and was the lowest, 33.16 mg KOH, within PE/PP of 0.10 mm in thickness in 8 months during storage at $20^{\circ}C$. L, a and b values, hunter color value of black rice were not changed significantly in all packaging materials during 8 month storage. Hardness of the black rice was increased a little, but changed the smallest in PF/PP and the largest in PE with 0.05mm in thickness in 8 months. During storage, hexanal content was increased the smallest in PE/PP and the largest in 0.05 mm PE. Among fatty acid of black rice, linoleic acid was changed the smallest in PE/PP and the largest in 0.05 mm PE. In conclusion, PE/PP was better for the storage of black rice than PE and PP.

• Journal of Adhesion and Interface
• /
• v.22 no.2
• /
• pp.69-77
• /
• 2021

A variety of efforts are attempted to make the world sustainable in fabrication industries worldwide. To achieve the goals, a new design concept for products is one of crucial factors to be able to dismantle them after use in easy and simple ways. New debonding technologies have been developed in recent years for the recycle and/or repair of bonded structures, where the bonds are broken without the damage of the components and make recycling easier. Some representative technologies of controlled delamination materials (CDM) are reviewed with an emphasis on light induced debonding of adhesives. We also describe current applications of light induced CDMs as temporary bondable films in semiconductor and display industries.

• Composites Research
• /
• v.27 no.6
• /
• pp.242-247
• /
• 2014

The fabrication of flexible electrodes coated on the surface of a dielectric elastomer film, which is a type of electroactive polymer (EAP), was carried out. Controlled amounts of Xylitol powder were added (10, 30, 50 and 70 wt%) to the commercial conductive polymer (PEDOT:PSS) to enhance resilience of the electrode. To check resilience of the fabricated composite electrodes, tensile tests were carried out using silicone films coated with the polymer electrodes. From the test results, it was found that 70 wt% Xylitol containing conductive polymer had excellent elongation and high failure strains. Furthermore, surface of the silicone film was uniformly polished with various abrading papers to enhance the wettability of the conductive polymers on the surface of the silicone film. It was found that the silicone film polished with #120 abrading paper had the best wettability and guaranteed excellent bonding behavior.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.662-670
• /
• 2008

The purpose of this in vitro study was to evaluate the effect of fluoride containing adhesive film on prevention of enamel demineralization. Eighty bovine enamel blocks were divided randomly into 4 groups of 25: (1) APF gel applied ; (2) CavityShield$^{TM}$ applied; (3) 3% fluoride film applied; (4) 5% fluoride film applied; Early caries lesions were produced by placing each specimen into demineralization solution at pH 4.0 for 72 hours. Then lesion of the surface microhardness were measured by the Vicke's hardness test and the lesions depth were measured by polarizing light microscope. The results of the present study are as follows: 1. Difference of microhardness value ($M{\pm}SD$) between control and experimental side was the highest in group II, followed by group IV, III, I but, no significant difference was between group II, III and IV. 2. Difference of mean lesion depth ($M{\pm}SD$) between control and experimental side was the highest in group II, followed by group III, IV and I but no significant difference was between group III and IV. The results of the present study indicate that the fluoride film application is more effective than APF gel and is similar to fluoride varnish application for prevention of dental caries.

• Journal of Adhesion and Interface
• /
• v.20 no.4
• /
• pp.146-154
• /
• 2019

In this study, alkoxysilane-functionalized amphiphilic polymer (AFAP), which have hydrophilic segment and hydrophobic segment functionalized by alkoxysilane group at the same backbone, was synthesized and used as a dispersant and control agent for reaction rate in the preparation of colloidally stable organic-inorganic (O-I) hybrid sols. After reaction with fluorosilane compounds, fluorinated O-I hybrid sols were prepared and coated onto glass substrate to form hydrophobic O-I hybrid coating films through low-temperature curing process. Surface hardness and hydrophobicity of cured coating films were varied with type of solvent and composition of AFAP and fluorinated alkoxysilane compounds. At appropriate solvent and composition of fluorinated alkoxysilane compounds, O-I hybrid coating film having high transparency and surface hardness could be prepared, which could be applicable to cover window of solar cell and displays.

• Journal of the Korean Vacuum Society
• /
• v.20 no.2
• /
• pp.146-154
• /
• 2011

The adhesive-tape of a liquid leak film sensor including the alarm system is developed. The sensing film is composed of three layers such as base film layer, conductive line layer, and protection film layer. The thickness of film is 300~500 um, the width is 3.55 cm, and the unit length is 200 m. On the conductive line layer, three conducting lines and one resistive line are formulated by the electronic printing method with a conducting ink of silver-nano size. When a liquid leaks for the electricity to be conducted between the conductive line and the resistive line, the position of leakage is monitored by measuring the voltage varied according to the change of resistance between two lines. The error range of sensing position of 200 m film sensor is ${\pm}1m$.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.130-135
• /
• 2007

To enhance the thermo-mechanical properties of polyimide films which have potential application for the FCCL, we have synthesized the poly (amic acid) s composed of 4-components PMDA/BTDA and PDA/ODA as monomer system, u4 then they were effectively converted into 4-component polyimide films by thermal imidization process. It has been found that CTE values in the range of $100\sim200^{\circ}C$ decreased with the amount of PDA, which also caused 36% and 59% increases in tensile modulus and strength respectively. And also, peel test results on 3-layered copper clad laminate using 4-component polyimide films showed excellent adhesion strength above 1.8 kgf/cm. On the basis of obtained results it can be concluded that 4-component polyimide films may be applied for the high performance FCCL base films.