• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.282-288
• /
• 2021

This basic research was conducted to support the development of woodcraft bio-adhesives using peach gum, which is the resin produced by peach trees. The synthesis conditions of these adhesives were optimized by performing 144 experiments. The application potential of peach gum adhesives was explored by comparing their properties with those of three natural adhesives and four synthetic adhesives. The best adhesive strength was obtained by dissolving the resin in 80 mL of distilled water containing 1.5 g NaOH, 1.65 g H₂O₂ ( pH 8.0-9.0), 0.5 g NaClO, and 0.5 g H₂BO₂. The adhesive strength, which showed minimal changes and excellent reversibility, was 125.39 kgf/cm². Ultraviolet radiation-mediated deterioration in strength in the absence of total aerobic bacteria was negligible (△E^*ab = 2.75). These data confirm the potential value of peach gum-based bio-adhesives for woodcraft as well as their utility as alternatives for natural and synthetic adhesives used for the manufacture and restoration of handicrafts and preservation of cultural assets.

• Elastomers and Composites
• /
• v.29 no.5
• /
• pp.419-425
• /
• 1994

폴리에스테르와 SBR 1502 고무의 접착을 위해 RTFL(resorcinol-tannin-formaldehyde-latex) 접착제를 사용하였다. T-peel geometry를 이용하여 접착력을 평가한 결과 접착제 조성에서 레소시놀과 탄닌이 4대 6의 중량비로 합성된 접착제를 사용한 경우 뛰어난 접착력을 보였다. 폴리에스테르 표면의 소수성과 활성기의 부족에도 불구하고 SBR 고무와 높은 접착력을 보인 이유는 RTFL 접착제 자체의 일정 조성에서 나타나는 toughness 때문이었다. 또한 폴리에스테르와 고무 접착을 위한 single dip 시스템인 N-3형 접착제와 RTFL 접착제를 사용하여 폴리에스테르와 SBR 고무를 접착시킨 후 $-20^{\circ}C{\sim}100^{\circ}C$의 온도 범위와 $0.2cm/min{\sim}50cm/min$의 박리속도 조건아래서 박리 실험하여 얻은 mastercurve들을 비교한 결과 전 범위에서 RTFL 접착제는 기존의 N-3형 접착제와 거의 필적할만한 접착 결과를 나타내었다.

• Journal of Korean Society of Forest Science
• /
• v.96 no.1
• /
• pp.54-57
• /
• 2007

Urea-formaldehyde (UF) resin was formulated similarly to plywood resin in the laboratory. The synthesized UF resin adhesive was mixed with extender, filler and acid catalyst. The mixture contained 56.1% total solids and 43.9% water. The mixes was used to bond five Com-Ply types using Korean wood species. The Com-Ply made were tested for shear strength and wood failure according to KS F 3101 ordinary plywood as well as for bending strength per KS F 3104 particleboard. The performance test results showed good strength properties for all Com-Ply types made in this study. This result represented that the UF resin adhesive mix was adequate for bonding Com-Ply with domestic wood species.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.681-688
• /
• 2019

In this study, the characteristics of natural and synthetic adhesives used in woodcraft were evaluated. The pattern of deterioration of wood and adhesives according to changes in temperature and humidity were compared. For materials, one type of anlmal glue, three kinds of polyvinyl acetate adhesives, one type of epoxy adhesive and one type of zelkova wood were selected. Characteristics of physical and chemical characteristics, weather resistance and drying speed assessment were carried out. The adhesion characteristic evaluation showed that the adhesion strength of anlmal glue and one type of polyvinyl acetate adhesive were 6.54 N/㎟ and 7.01 N/㎟, pH meter of anlmal glue and polyvinyl acetate adhesives was pH 7.03 and pH 3.32-3.59 which were range of available as an adhesive. According to the test results of weather resistance, epoxy adhesives had the highest decreasing value in adhesion strength after deterioration. In the reversible test of the adhesive, it was found to be highly reversible in NaOH, a soluble solvent excluding epoxy, but attention is required when using the wood since it may show discoloration during processing.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.597-605
• /
• 2019

In order to improve the adhesion of water-based adhesive, gemini type nonionic reactive surfactants were synthesized and applied to water-based adhesives. The surfactants were synthesized by using maleic acid and polyoxyethylene cetyl ether having different length of ethylene oxide and confirmed by FT-IR and $^1H-NMR$. Their appearance was light yellow wax. The cloud point of the compound was more than $78^{\circ}C$. The measured critical micelle concentration (c.m.c) was $1.0{\times}10^{-4}{\sim}7.0{\times}10^{-4}mol/L$ and surface tension at c.m.c was 25.9~32.0 mN/m. As the number of ethylene oxide increased, the emulsifying power was improved. The foaming height of each compound by Ross-Miles method was 1.4~4.5 cm. The synthesized surfactants was then used as an emulsifier in emulsion polymerization of water-based adhesives and its physical properties were evaluated. The solid contents of prepared adhesives was 59%. The average particle size and initial tackiness of the prepared adhesives were 164~297 nm and ball no. of 20~32, respectively. The peel strength was $1.8{\sim}2.1kg_f/mm$. The retention rate of adhesives viscosity was evaluated to 99% during 30 days. Therefore, synthesized gemini type nonionic reactive surfactants are expected to be applied as an emulsifier for the high adhesive force.

• Journal of Yeungnam Medical Science
• /
• v.8 no.1
• /
• pp.127-135
• /
• 1991

Successful middle ear surgery requires the availability of al safe, effective bonding material. Side effect caused by synthetic materials have led to the use of biologic adhesive. However, they carry the risk of transmission of infectious diseases if they are prepared from pooled human blood. The adhesive strength of ammonium sulfate fibrin adhesive produce an adhesive strength that is half that of the homologous commercial product. It is, however, good enough for use in several otolaryngological operations, tympanoplasty, facial nerve repair, reconstruction of ossicles, reconstruction of posterior wall of ear canal and obliteration of frontal sinus and mastoid antrum using bone dust.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.387-394
• /
• 2012

Most of the libraries and archives that lacks conservation lab facilities, frequently apply common synthetic resin adhesives such as PVAc group(Pa), acrylic group(Ac) and PVP group(Pv) on simple repairs. The archival quality synthetic adhesive(Pa-1) that is used at the National Library of Korea and the common synthetic resin adhesives were selected for the experiments. Accelerated aging test was applied on the adhesive samples and change of the pH and chromaticity were measured for one month. As the result of the pH mesurments, Pa-1 and Ac-2 were at the acceptable pH range. As the result of the chromaticity mesurments, degree of yellowing(${\Delta}b^*$) showed smaller change to greater change in the following order; Pa-1

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.05a
• /
• pp.27-29
• /
• 2003

해양생명체인 홍합(mussel)은 접착단백질(adhesive protein)을 생산, 분비함으로써 홍합 자신을 바다 속의 바위와 같은 젖은 고체표면에 단단히 부착할 수 있도록 하여 강한 파도의 충격이나 바닷속의 부력 효과에 대하여도 저항할 수 있다. 홍합접착단백질은 현재 알려진 어떠한 화학합성 접착제보다도 강력한 자연적인 접착제로 알려져 있으며 대부분의 에폭시 수지보다 두 배 정도의 커다란 인장강도를 지니고 있으면서도 휘어질 수 있는 유연성을 가지고 있는 혁신적인 물질이므로 접착제 산업계에서 매우 커다란 관심을 끌고 있다. (중략)

• Applied Biological Chemistry
• /
• v.39 no.2
• /
• pp.123-126
• /
• 1996

Simple and rapid method of purification of plasma proteins from bloods of slaughtered animals was developed and the proteins were applied to plywood products as a blood 히ue to utilize waste materials. Plasma protein was obtained by adding 2% trichloroacetic acid (TCA) or 0.6 N HCI as optimal concentration to the supernatant, after centrifugation of bloods. Molecular properties of beef and pig plasma proteins were examined on SDS-PAGE. Application of blood glue to plywood was quite satisfactory compared to the synthetic amino resin by tensile-shear test for the strength of adhesive bonding.

• Korea Science and Art Forum
• /
• v.37 no.5
• /
• pp.239-248
• /
• 2019

This study started from the need to improve one of shortcomings of synthetic PVAc adhesives - potential physical harm and environmental hazards to the workers or their users. As a matter of fact, PVAc adhesives are currently mainly used because of their convenience and economy for the production of woodcrafts. The purpose of this study was to develop natural adhesives through research on natural adhesives in step with the current increase of societal attention to environmental friendliness and rapid surge in their demand in the face of such problems. So, the study attempted research on the bases to develop natural adhesives for woodcraft, using cellulose extracts from wood - natural adhesive material. The findings of the study were as follows. Firstly, natural adhesives showed the improved effect in the field of adhesive strength, a basic physical property by 0.2 - 4 times compared with the existing materials and the study confirmed they had the similar or stable pH value. Besides, they had good reversibility, demonstrating their basic physical property as a natural adhesive for woodcraft. While, their durability to ultraviolet ray degradation also showed an excellent result value being better by 1.5 - 8.5 times than the existing materials. The study expects natural adhesives with improved and better performances compared with the existing materials could be developed, if further research on adhesive strength, antibiosis, conservative property were to continue by developing refinery technology for cellulose extracts from wood and rendering the functionality to them.