• Journal of the Korean Academy of Esthetic Dentistry
• /
• 제21권1호
• /
• pp.4-22
• /
• 2012

치경부에 발생된 병소 부위(cervical lesion)는 "우식성 병소(caries lesion)"와 "비우식성 병소(non-caries lesion)"로 분류할 수 있다. 우식성 병소는 구강 내 세균들의 활동에 기인하여 발생된 병소로서 경조직 손상 부위의 수복과 함께 우식이 재발하지 않도록 체계적으로 대응하는 것이 필요하다. 비우식성 병소는 산성 물질, 저작력 및 이물질에 의한 마모 작용과 같은 다양한 원인에 의해 발생될 수 있으며, 수복 치료에 앞서 병소에 발생 원인을 규명하는 것이 중요하다. 먼저 병소 유발 원인에 대한 분석과 이에 대한 적절한 조치를 취한 후에 수복 치료를 시행하는 것이 바람직하다. 심미적인 요구가 높은 치경부 병소의 수복을 위하여 사용될 수 있는 재료는 "불소를 방출하는 재료"와 "불소를 방출하지 않는 재료"로 나뉘어지는데, 세균의 활동에 의해 형성된 우식성 병소의 수복에는 불소를 방출하는 재료를 사용하는 것이 추천된다. 우수한 심미성과 보다 강력한 유지력이 요구되는 경우에는 복합 레진계 수복 재료들을 사용하여 수복하게 되는데, 이 경우에는 "접착 술식(bonding procedure)"이 중요한 역할을 수행하게 된다. "접착 술식"은 수복물의 일차적인 유지 뿐 아니라 지각과민을 해소하고 2차 우식을 방지하며, 궁극적으로 수복물의 수명을 좌우하는 결정적인 역할을 수행한다. 자연 치아를 최대한 보존하고자 하는 "최소침습(minimum intervention)" 개념에 바탕을 두고 세심하게 형성된 와동에 각각의 증례에 최적화된 수복 재료를 선택하여 수복치료를 시행한다면 보다 심미적이고 환자가 편안한 치경부 수복물을 완성할 수 있을 것이다.

• Journal of Dental Rehabilitation and Applied Science
• /
• 제31권4호
• /
• pp.329-339
• /
• 2015

Purpose: To investigate the information acquisition, selection criteria and selection methods of Mongolian dentists regarding adhesive agents for bonded restorations, and to provide future direction for continuing education. Materials and Methods: One hundred Mongolian dentists were interviewed and asked to complete a questionnaire containing 7 questions on general information about the responder, 8 questions on information acquisition and selection of bonded restoration agents, and 10 questions on continuing education. Results: Objective and credible information regarding bonded restoration materials were not being acquired, and logical material selection was not being made. The extent of continuing education was inadequate and not enough information regarding education was being acquired. The participants responded positively to online supplementary education. Conclusion: A systemized approach needs to be established in Mongolian dentistry to enable organized delivery of evidence-based guidelines and information, and logical selection of the numerous and various bonded restoration agents. Furthermore, the education of dentists, through various means, is required to enable proper use of the selected materials.

• Journal of the korean academy of Pediatric Dentistry
• /
• 제50권1호
• /
• pp.104-112
• /
• 2023

A 3D-printed resin crown is a novel option for esthetic crown restoration for primary teeth, which are typically bonded with resin cement. The purpose of this study was to evaluate the bonding ability of a 3D printing resin and compare it with other indirect resin materials for crown fabrication. The shear bond strengths of two 3D printing resin materials, Graphy (GP) and NextDent (NXT), and two indirect resin materials, VIPI Block (VIPI) and MAZIC Duro (MZ), were compared in the study. For all materials, the shear bond strength at the interface between the surface of the resin material and resin cement was measured. The mean shear bond strength values of GP, NXT, MZ, and VIPI were 23.29 ± 3.88, 26.14 ± 4.67, 25.41 ± 4.03, and 18.79 ± 4.26 MPa, respectively. There was no significant difference among the SBSs of GP, NXT and MZ except for VIPI. The result of this study indicates that the 3D printing resin meets the essential requirement for clinical use by showing clinically adequate bond strength.

• Proceedings of the KACD Conference
• /
• 대한치과보존학회 2003년도 춘계학술대회
• /
• pp.288-288
• /
• 2003

1960년대 중반부터 도입된 구치부 복합레진 수복은 복합레진과 접착시스템의 향상된 물성 때문에 구치부 사용에 대한 주목할 만한 결과를 보고하고 있다. 현재는 다수의 1급, 2급 수복물에 복합레진이 적응증으로 기술되며, 사실상 미국치과의사 협회(ADA)도 초기와 중등과 크기의 병소를 보존적 I, II급 와동으로 형성된 뒤 복합레진으로 수복하는 시술의 적절성을 인정하고 있다. ADA는 "복합레진을 유치나 영구치의 I급, II급, V급 수복에 올바르게 적용하면 아발감의 수명에 뒤지지 않는다."라고 기술하고 있다. 이에 본 강연에서는 I급과 II급 복진레진 수복을 위한 관련된 재료들의 특성과 단점들을 극복하기 위한 노력들을 설명하고자 한다. 특히 중합수축과 관련된 문제점들을 해결하기 위해 제시되고 있는 방법들의 임상적 적용 가능성의 한계와 술후 과민증을 줄이기 위한 방법, 그리고 구치부에 적용된 레진들의 마모를 줄일 수 있는 방법들을 모색하고 한다. 더불어 구치부 복합레진 수복을 위한 임상 시술 시 가장 흔하게 발생되는 단조로운 인접면 외형 형성 및 접촉점 개방의 문제점을 인식하고 이를 막기 위한 노력 및 기구들의 사용 조작에 대해 토의해 보고자 한다.

• The Journal of Korean Academy of Prosthodontics
• /
• 제61권2호
• /
• pp.135-142
• /
• 2023

Resin-bonded fixed partial denture (RBFPD)as known as Maryland bridge is is a well-known conservative method for its minimized invasion of the teeth for an anterior single tooth edentulous area. Despite of its various advantages, RBFPD was not widespread because of its high debonding rates, non-esthetic look or weak structure for material property. Currently, with the introduction of zirconia to dental material for RBFPD, Maryland bridge entered upon a new phase. Zirconia surmounts poor esthetics of metal framework, having proper strength, and overcomes ceramic's structural weakness, being sufficiently esthetic. In this case, edentulous area of maxillary left lateral incisor was restored using zirconia resin-bonded fixed partial denture. Restoration of missing tooth in anterior area was achieved using non-invasive and esthetic prosthesis, then we report this case as satisfactory results were obtained for both the operator and the patient.

• The Journal of Korean Academy of Prosthodontics
• /
• 제46권4호
• /
• pp.372-380
• /
• 2008

Purpose: The purpose of this study was to evaluate the effect of various methods of dentin bonding agent application on microtensile bond strength between dentin and resin, using a 2-step etch-and-rinse dentin bonding agent. Material and methods: Twenty freshly extracted human molars were obtained and divided into 4 groups of 5 teeth. 2-step etch-and-rinse dentin bonding agent was used for all groups. The control specimens were prepared using a direct immediate bonding technique. The delayed dentin sealing (A, C) specimens were prepared using an indirect approach with delayed dentin sealing. For group A, resin was built-up on uncured dentin bonding agent, and for group C, resin was built-up on pre-cured dentin bonding agent. Preparation of the immediate dentin sealing (B) specimens also used an indirect approach with immediate dentin sealing immediately following preparation. All teeth were prepared for a microtensile bond strength test. Specimens were stored in water for 24 hours. Ten beams (1.0 ${\times}$ 1.0 ${\times}$ 11 mm) from each tooth were selected for testing. Bond strength data (MPa) were analyzed with a one-way ANOVA test, and post hoc comparison was done using the Scheffe's test. Results: The mean microtensile bond strengths of control group, B and C (DDS with pre-cure) were not statisticaaly different from each other at 32.7, 33.3, 34.2 MPa. the bond strength for group A (DDS without pre-cure), 19.5 MPa, was statistically different (P < .01) from the other 3 groups. Conclusion: When preparing teeth for indirect bonded restorations, DDS with pre-curing dentin bonding agent and IDS results in the same bond strength between dentin and resin. On the contrast, the bond strength was decreased when DDS without pre-curing dentin bonding agent was used.

• The Journal of Korean Academy of Prosthodontics
• /
• 제49권2호
• /
• pp.106-113
• /
• 2011

The object of this clinical study was to evaluate the short-term outcome of modified resin-bonded fixed partial dentures which utilizes the original tooth undercuts and different path of insertion of components. Materials and methods: 71 units of modified RBFPDs that were used in 21 patients at the Department of Prosthodontics, College of Dentistry, Yonsei University were evaluated. The follow-up period was up to 25 months, the mean being 7 months. Survival rate, mobility, percussion, probing depth, bleeding on probing, plaque index was recorded and radiographs were taken to monitor alveolar bone loss. Results & Conclusion: Within the limits of this short term retrospective study, it was concluded that: 1. No mechanical failure such as debonding or fracture of the framework was found during the follow-up period. 2. The periodontal apparatus was stable and no clinical change was observed after prosthetic treatment. 3. No significant marginal bone loss was found in the radiographic evaluation.

• Journal of the korean academy of Pediatric Dentistry
• /
• 제28권3호
• /
• pp.530-534
• /
• 2001

Many dental practitioners are bonding amalgam to tooth structure. The potential advantage of this procedure, suggested by in vitro test results, are reduced microleakage, which could lead to a reduced incidence of postoperative sensitivity ; increased strength of the prepared tooth ; and retention of restoration in less retentive preparations, with the potential fer conserving tooth structure. Although in vitro studies support this procedure, its efficacy has not been adequately confirmed in the clinical environment. The authors placed traditional Class I and Class II, bonded and unbonded amalgam restorations in 76 teeth. Fuji I Glass Ionomer luting cement was the bonding agent selected. Marginal adaptation were evaluated after two years. the authors found no significant difference in marginal adaptation between bonded and unbonded restorations.

• Journal of the korean academy of Pediatric Dentistry
• /
• 제27권2호
• /
• pp.237-245
• /
• 2000

For the purpose of comparing the bond strengths of some tooth adhesive restoration materials on primary enamel and dentin, 4 kinds (7 brands) of restorative materials including a composite resin (Z 100), a conventional glass ionomer cement (Chem-Flex), 2 brands of resin-modified glass ionomer cements (Fuji II LC-I, Vitremer), and 3 brands of compomers(Dyract AP, F2000, Compoglass) were investigated using UTM for measuring the shear bond strengths. Additionally the failure modes were examined by histologically observing the fractured surfaces of each specimen. The following results were obtained. 1. The shear bond strengths of Z 100 to the primary enamel were higher than those of other experimental materials except Fuji II LC-I, which showed significantly higher bond strength than Chem-Flex or Vitremer (P<0.05). 2. The shear bond strengths of Z 100 to the primary dentin were higher than those of other experimental materials except Dyract AP and Fuji II LC-I, both of which showed significantly higher shear strength than Chem-Flex or Vitremer (P<0.05). 3. The shear bond strengths of all restorative materials except Dyract AP showed relatively higher values to enamel surface than to dentin surface. In Dyract AP, the reverse was true significantly. 4. All materials examined showed cohesive failures except some Chem-Flex and Vitremer, which showed adhesive failures.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.357-365
• /
• 1998

목적: 치과용 수복재료의 방사선 불투과성은 매우 다양하다. 따라서 다양한 수복재료의 방사선 불투과성을 인지하여 치질과 비교하면 이차우식의 진단에 도움이 될 수 있다. 도재의 방사선 불투과성에 따라 적절한 luting cement의 선택이 가농해진다. 수복재료의 방사선 불투과성은 알루미늄 step wedge 의 후경과 방사선 불투과성과의 상관관계 의해 측정된다. 본 연구의 목적은 CAD/CAM용 도재와 이틀의 접착에 쓰이는 접착재료의 방사선 불투과성을 조사해 적절한 재료의 선택과 이차우식 진단의 효율결정에 도움이 되게 하는데 있다. 방법: 본 실험에서는 CAD/CAM용 도재인 Vita MarkII, Dicor MGC와 이의 접착에 사용되는 Z-100, 그리고 luting cement인 Duo cement, Scotchbond resin cement를 사용해 방사선 불투과성을 측정하였다. 시편 제작을 위해 도재를 저속절단기로 두께 2mm, 3mm로 절단하였으며 Z-100과 cement시편은 두께 2mm와 3mm, 직경 7.0mm의 금속 주형을 제작한 후 재료를 양쪽 면에 유리판을 대고 조임쇠로 압접하였으며 광조사기를 사용하여 각 재료마다 두 가지 두께로 10개씩 100개의 시편을 제작하였다. 치질의 시편을 얻기 위해 교정 목적으로 최근에 발거된 정상적인 상악 소구치를 저속 절단기를 사용하여 협설측 교두정을 기준 삼아 2mm, 3mm 두께로 절단하였으며 방사선 불투과성의 기준을 위해 12개의 step으로 구성된 12mm두께의 aluminum step wedge를 사용하였다. Kodak E-Speed occlusal film에 aluminum step wedge와 시편들을 위치시킨 후 70kVp, 7mA, 2.16mm aluminum filtration으로 고정된 dental X-ray unit을 사용하여 target과 film 사이의 거리는 25cm, 노출시간은 0.2초로 하여 방사선 촬영을 한 다음, 현상된 방사선 사진상에 나타난 방사선 불투과성을 X-rite 301 densitometer를 이용하여 측정한 값들의 평균을 냈다. 얻어진 결과는 one-way ANOVA Duncan test(P<0.01)로 검증하였다. 결론: 1. Dicor MGC의 방사선 불투과성은 법랑질보다 약간 높게 나타났다.(P<0.01) 2. Vita Mark Il는 상아질보다 낮은 방사선 불투과성을 보였다.(P<0.01) 3. Z-100과 Luting cement들의 방사선 불투과성은 법랑질보다 높았다. Duo cement가 방사선 불투과성이 가장 높았고 그 다음이 Z-100, 그리고 Scotchbond resin cement 순이었다. 4. Z-100과 2종류의 방사선 불투과성 luting cement들은 Vita Mark II 와 같이 사용하면 2차우식 진단에 도움이 된다.