• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.1001-1004
• /
• 1987

In this study mathematical properties of variational solution and solution of the boundary integral equation of the linear elasticity problem are studied. It is first reviewed that a variational solution for the three-dimensional linear elasticity problem exists in the Sobolev space [ $H^{1}$(.OMEGA.)]$^{3}$ and, then, it is shown that a unique solution of the boundary integral equation is identical to the variational solution in [ $H^{1}$(.OMEGA.)]$^{3}$. To represent the boundary integral equation, the Green's formula in the Sobolev space is utilized on the solution domain excluding a ball, with small radius .rho., centered at the point where the point load is applied. By letting .rho. tend to zero, it is shown that, for the linear elasticity problem, boundary integral equation is valid for the variational solution. From this fact, one can obtain a numerical approximatiion of the variational solution by the boundary element method even when the classical solution does not exist.exist.

• Fire Science and Engineering
• /
• v.26 no.5
• /
• pp.105-110
• /
• 2012

The present study investigates the effects of sprinkler spray on fire driven flow characteristics in a compartment based on numerical approach. The FDS (Fire Dynamics Simulator), a widely used fire field model, was used to simulate the fire induced flow and sprinkler spray and a series of grid independence tests have been performed to obtain the optimal grid size. In order to validate the result predicted by FDS model, the calculated results were compared with experimental results of Magnone et al.. The FDS model matches quite well to experiments in temperature profile and mass flux through doorway, however, the discrepancy between the FDS model and experiments increases with increasing water discharge rate. As with previous study, the FDS calculation also shows a decrease of mass flow rate of combustion products through doorway due to the sprinkler spray. This study can contribute to optimize the sprinkler system design and verify the validity of the fire field model with sprinkler spray.

• Korean Journal of Remote Sensing
• /
• v.31 no.3
• /
• pp.245-253
• /
• 2015

According to wide civilian utilization of multi sensor satellite information, practical needs for fusion processing and interoperable operation with multiple remote sensing imageries within distributed remote server are being increased. For this task, OGC standards with respect to satellite images and its derived products are crucial factors. This study is to present an applicability of WPS through testing implementation of image processing algorithm. Open sources such as Geoserver and OTB were used linked to WPS application for implementation. WPS can be solely used for web service supporting geoprocessing algorithm, but technical consideration compromising with other important standard protocols including WMS, WFS, WCS, or WMTS is necessary to build full featured geo web for remote sensing imageries. It is expected that application of these international standards for geo-spatial information is an important approach to produce value-added results by interoperable processing between interorganizations or information dissemination containing practical satellite image processing functionalities.

• Journal of Korea Multimedia Society
• /
• v.13 no.4
• /
• pp.582-593
• /
• 2010

Recently the commercial value of GIS(geographic information system) has been increased with growing application demands of spatial information in life space. Also, GIS has been expanded to the integrated information system that provides the ease access to map information by public users and also the combined service of GIS map data and various multimedia contents. But several security problems of GIS map data have brought up at GIS industries, such as the illegal copy and distribution of GIS map data. Furthermore, the copyright protection of GIS map data has not been researched yet compared with image and video contents. This paper presents a polyline based watermarking scheme for the copyright protection of GIS vector map. The proposed scheme analyzes the structure of vector map and embeds adaptively the watermark by using the distance distribution of polyline components. From experimental results, we verified that the proposed scheme satisfies the invisibility and the robustness of geometrical attacks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3974-3981
• /
• 2010

Coastal landscape is a collective setting of artificial or natural elements along the seaside. The approach method for the coastal landscape formation is different from that of urban landscape formation. This study analyzes the mechanism of coastal landscape formation process in Japan in the aspects of recognition phase, formation phase, and practice phase. The characteristics of coastal landscape formation process in Japan are construction of a survey system for integrating diverse landscape elements as a final coastal landscape, construction of a coherent evaluation system responding the local natural and spatial characters, and building a cooperative system responding the police of coastal landscape formation. This study suggest the implications both for the improvement of domestic local values and for the ways of the domestic coastal landscape formation.

• Tunnel and Underground Space
• /
• v.12 no.1
• /
• pp.10-18
• /
• 2002

Rock joint system makes a heavy effect on the behavior of rock structures. The definition of a 3D rock joint system is very important in 2D or 3D numerical analysis for the prediction of the behavior of a discontinuous rock mass. To enhance the reality of a 3D definition of rock joint system, it is essential to estimate the unbiased statistics of basic geometric attributes of rock joints. In this study, we have proposed the statistical analysis and derived the related equations for an estimation of statistics of joint size and intensity. Geometry of rock joints in 3 dimensional space can be defined by the aggregate of location, size, orientation and intensity. The dimensional limit of survey method and its data makes 3D geometric attributes probabilistic. In the estimation of statistics of joint size, we have discussed the technique to correct the bias from a dimensional limit and derived the equation of 3D joint intensity by stereological approaches.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.3
• /
• pp.319-329
• /
• 2016

Underground structures such as subsea tunnel having large section should be stable against seismic loads. In general, underground structures show more stable behavior due to the limited dynamic motion and force, and considerable energy dissipation; however, severe damage was reported from recent earthquakes. Therefore, more sophisticated and analytic approach is required to investigate the seismic response of underground structure like subsea tunnel. In this study, seismic analysis of virtual Honam-Jeju subsea tunnel are performed. Consequently, stresses and forces of tunnel lining increased at fractured and/or weak rock zones. Stresses and forces of tunnel lining also increased at large section under axially deformed condition; however, decrease under transversely deformed condition.

• The Journal of the Korea Contents Association
• /
• v.10 no.10
• /
• pp.398-407
• /
• 2010

The purpose of this study is to explain the neighborhood region "gimpo northwest area" connection development make use of a core tourist area "kanghwado" of visitor behavior characteristics. this is a foundation data for research of kanghwado behavior characteristics. For this research, the description of the current study were as follows. First kanghwado revisitors of high potentialities visit gimpo northwest area. so its demanded same or different attraction development and make an target marketing from kanghwado revisitors. Second the gimpo northwest keep the accent on development history and experience education of housewives families. Third publicity board parking area and infrastructure is demanded on the 48th street. Forth Han river and Imjin river meeting point gimpo north area, each other kanghwado gimpo west put opposite Yeomha river there can see point the west sea. therefore we need waterside attraction.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.112-112
• /
• 2011

오늘날 우리 사회의 생활과 문화의 질이 향상됨에 따라 공공 및 개인의 안전과 건강에 대한 관심이 증대되고 있다. 특히, 재난과 비상사태는 생명에 대한 희생뿐만 아니라 훨씬 더 심각한 경제적인 결과를 초래한다. 이러한 응급사태에 개비하여 적절히 준비되지 않았거나 재난의 예방 및 완화시킬 방법을 가지고 있지 못한다면 도시의 발전적인 프로젝트는 예고 없이 도시를 강타하는 재난 및 비상사태에 의해 무산되고 만다. 이러한 여건 하에 재난과 응급사고를 효율적으로 대처하는 응급처치와 서비스에 대한 급격한 관심과 함께 일정한 결정적 대응시간 내에 각종사고와 재해로부터 방어할 수 있는 공공서비스에 대한 필요성이 크게 증가되었다. 본 연구에서는 신고, 응급구조, 환자이송 등 도시의 병원 전 단계 의료환경에 대해서 조사하였다. 본 연구의 목적은 반응시간과 출동거리를 분석함으로써, 응급사고에 즉시 응급구조서비스를 제공하기 위해 안전센터(119센터)의 최적 입지를 확인하는 것이다. 이를 위해서 사고발생, 반응시간, 출동거리 등을 응급의료 활동과 관련된 연구논문, 대상지 전역의 소방기록물과 출동일지 등의 통계자료를 활용하여 신속한 응급의료 서비스를 위한 패턴을 분석 하였다. 또한 응급구조대의 조직과 활동의 분석을 통해 응급의료시설의 최적 입지설정을 위한 제도적 개선대안을 마련해 보았다. 대상지 연구를 위해, 구조활동 및 소방서비스의 최근 통계자료의 조사를 통해 진주시의 모든 119센터의 입지와 응급의료서비스 및 사고발생 현황을 나타내었다. 자료 분석을 위해서 SPSS14.0을 사용하였으며, 지역의 특성 분포, 안전센터별 대응시간, 이송시간 등을 소방 GPS시스템과 입지할당모형 중 Center Point Model(CPM)을 적용하였다. 결과적으로 본 연구를 통해 대상지역의 119안전센터의 서비스 질이 나쁜 지역을 지리학적인 관점에서 최적 입지/배분 패턴의 설정을 통해 확인할 수 있었으며, 이를 통해 미래 응급의료서비스의 효율적인 입지/배분을 통해 공공 및 개인의 안전과 건강에 기여할 수 있을 것으로 기대된다.

• Journal of Digital Contents Society
• /
• v.16 no.2
• /
• pp.335-343
• /
• 2015

This paper describes a quantitative approach to the BIM-enabled assessment of building circulation by using quantitative data and applying its weight. Assessment of building circulation plays an important role before construction stage because of related requirements regulated by design guide, building codes, etc. and design decision making as well. In this paper, Qualitative issue is mainly dealt with that are usually excluded from rule checking objects due to their implicit definition such as 'comfortable circulation'. A weighting framework is suggested using weighted data of circulation properties such as 1) metric distance, 2) number of passing spaces, 3) number of turning spaces, 4) window area of passing space, etc.