Proceedings of the Korean Vacuum Society Conference
/
2015.08a
/
pp.198-198
/
2015
전기변색재료는 전압을 인가하였을 때 전계방향에 따라 가역적으로 색이 변화하는 재료를 말한다. 스마트윈도우용 전기 변색재료는 지속적으로 전기를 가해줄 필요 없이 한번 변색되면 색이 지속되는 특징을 가지므로 에너지 효율적으로 우수하여 태양열 차단 창호나 디스플레이 분야에 응용될 것으로 기대된다. 이러한 전기 변색재료에는 산화형 전기 변색 재료, 환원형 전기 변색 재료가 있는데 이중 가장 널리 연구되고 있는 재료는 환원형 전기변색재료이다. 대표적인 재료로 $WO_3$가 쓰이는 데 이는 전기 변색적 특성이 우수하고 또한 내구성이 다른 재료에 비해 우수하다는 장점 때문이다. 그러나, 상용화를 위해서는 내구성의 개선이 요구되고 있다. 한편, $TiO_2$는 안정성이 매우 뛰어나지만 전기변색적 특성이 $WO_3$에 비해 낮은 점이 지적되고 있다. 이러한 $WO_3$ 및 $TiO_2$ 박막은 스퍼터링 또는 sol-gel법 등으로 제작되고 있는데, 일반적으로 스퍼터링의 경우 치밀한 박막이 형성되기 때문에 Porous 한 박막을 얻기 힘들다. 따라서 본 연구에서는 기판에 입사하는 스퍼터 입자들의 각도를 조절하여 shadowing 효과로 인해 박막의 구조가 porous해지는 Glancing angle deposition을 도입하였다. 이러한 증착법을 이용하여 $WO_3$와 $TiO_2$를 각도를 조절하여 증착하고 $TiO_2$와 $WO_3$ 박막의 특성을 비교하여 본다. 두께 300 nm를 가지는 $WO_3$ 및 $TiO_2$ 박막은 GLAD RF 마그네트론 스퍼터링법을 이용하여 Corning glass(corning E-2000)기판 위에 증착하였다. 기판 입사 각도는 $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$로 증착하였고 직경 3 in의 $TiO_2$, $WO_3$ 타겟을 사용하였다. 또한 스퍼터링 파워는 400 W, 작업압력 1.0 Pa, 그리고 스퍼터링 가스는 O2/Ar+O2 유량 10%에서 30%로 증착을 상온에서 진행하였다. 전기화학적 특성을 평가하기 위하여 $TiO_2$ 및 $WO_3$ 박막을 100 nm 두께의 ITO/glass 위에서 증착하였다. 박막의 미세구조는 XRD와 SEM을 통해 확인하였고, 전기화학적 특성은 Ar 분위기의 Glove box안에서 parstat 2273을 통해 측정하였다. 전해질은 1 M $LiPF_6/PC$로 진행하였고, 대향 전극는 Pt전극을, 참고 전극은 칼로멜 전극을 사용하였다. Potential 범위는 2 V에서 4 V로 진행하였고, scan rate는 50 mV/s로 측정하였다. 투과도는 UV/VIS spectrometer로 측정하였다. 전기변색 특성의 상관관계 및 에 대해서는 학회 당일 발표할 예정이다.
제 3원소가 첨가된 금속간 화합물 TiAI 금속간 화합물 분말을 PREP법(플라즈마 회전전극법)으로 제조하여, 통.방전 강압소결법에 의해 치밀한 소결체를 만들었다. 이에 대해 첨가 원소의 종류와 열처리에 따른 고온 및 상온 압축 특성의 변화를 조사하였다. 소결체의 미세조직은 ${\gamma}$/$\alpha$2 lamella로 이루어진 완전 변태구조였고, 결정립의 크기는 140-150$\mu\textrm{m}$였으며 계단형 결정립계를 나타내었다. 소결체를 ($\alpha$+${\gamma}$)구역인 130$0^{\circ}C$에서 2시간 동안 열처리한 결과, 모든 조성의 시편이 등축점 ${\gamma}$와 lamella로 이루어진 전형적인 duplexrn조로 변태하였다. 상온 압축 시험에서 시편은 파괴될 때까지 가공경화 현상이 나타났으며, Cr을 첨가한 시편이 가장 큰 파괴응력과 변형률을 나타내었다. 한편, 고온 압축 시험의 경우 온도상승 때문에 가공경화의 속도가 감소되었고, 80$0^{\circ}C$에서는 가공경화와 회복이 균형을 이루는 소위 정상 상태의 변형을 보였다.
We studied the formation of nickel nano thin film that have various electrochromic properties. Nickel thin film having various thickness will apply photoelectronic devices, specially, electrochromic devices. These devices will apply lens, battery, glass and solar cell that have light, thin, simple and small that applied nanotechnology and quantum dot. Nickel thin film was coated by electrochemical method on ITO electrode. We studied the thin film properties by Cyclic voltammetry, Chronoamperometry. Impedance. X-ray diffraction analysis and Atomic force microscopy.
Park, Seong-Tae;Choe, Byeong-Hyeon;Lee, Dae-Jin;Kim, Bit-Nam;Ji, Mi-Jeong
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2009.11a
/
pp.273-273
/
2009
고체산화물 연료전지 (Solid Oxide Fuel Cell, 이하 SOFC)는 제조형태에 따라 크게 평판형과 원통형으로 구분할 수 있다. 단위면적당 출력 효율이 높은 평판형의 장점과 원통형의 밀봉이 용이한 장점을 동시에 가지는 평관형 형태로 지지체를 제작하였으며, 셀의 배치를 평면상 직렬로 연결하는 다전지식으로 구성함으로 전극의 길이나, 셀 간격을 기존 평판형이나 원통형에 비해 대폭 감소시켜 단위면적당 전압 및 출력효율을 높이고자 하였다. Segmented 평관형 지지체의 소재로는 연료전지의 성능 특성에 관여하지 않으며 열사이클 저항성과 기계적 강도가 우수한 spinel구조를 가지는 $MgAl_2O_4$를 선정하였다. 연료가스의 원활한 공급이 가능하도록 carbon을 기공 전구체로 사용하여 압출성형하였으며 건조과정에서 crack이 생기지 않는 공정을 확립한 후 $1400^{\circ}C$ 에서 소결하였다. 제조된 지지체는 수은침투법과 3점 굽힘 강도법으로 기공율과 기계적 강도를 각각 측정하였다. Anode를 스크린 프린팅법으로 지지체 위에 적층한 후 미세구조를 확인하였고 이를 바탕으로 다공성이며 기계적 강도를 가지고 음극과의 반응이 없는 우수한 지지체를 제조할 수 있었다.
Resistivity logging instruments were designed to measure electrical resistivity of formation, which can be directly interpreted to provide water-saturation profile. Short and long normal logging measurements are made under groundwater level. In some investigation sites, groundwater level reaches to a depth of a few meters. It has come to attention that the proximity of groundwater level might distort short and long normal logging readings, when the measurements are made near groundwater level, owing to the proximity of an insulating air. This study investigates the effects of the proximity of groundwater level (and also the proximity of earth surface) on the normal by simulating normal logging measurements near groundwater level. In the simulation, we consider all the details of real logging situation, i.e., the presence of wellbore, the tool mandrel with current and potential electrodes, and currentreturn and reference-potential electrodes. We also model the air to include the earth’'s surface in the simulation rather than the customary choice of imposing a boundary condition. To obtain apparent resistivity, we compute the voltage, i.e., potential difference between monitoring and reference electrodes. For the simulation, we use a twodimensional, goal-oriented and high-order self-adaptive hp finite element refinement strategy (h denotes the element size and p the polynomial order of approximation within each element) to obtain accurate simulation results. Numerical results indicate that distortion on the normal logging is greater when the reference potential electrode is closer to the borehole and distortions on long normal logging are larger than those on short normal logging.
O, Il-Gwon;Kim, Min-Gyu;Park, Ju-Sang;Kim, Hyeong-Jun
Proceedings of the Materials Research Society of Korea Conference
/
2012.05a
/
pp.82.1-82.1
/
2012
란타늄 산화물 ($La_2O_3$) 박막은 하프늄 산화물 ($HfO_2$) 박막보다 높은 유전 상수와 높은 밴드 오프셋으로 인해 dynamic random access memory(DRAM)에서 유전체 재료로써 연구되어 왔다. 그리고 Lanthanum이 도핑된 HfO2이 더 높은 유전 상수와 낮은 누설 전류 밀도를 갖는 다는 사실이 이전에 보고 된 바 있다. 본 연구에서 우리는 ALD를 이용하여, TiN 하부 전극 위에 $La_2O_3$의 위치를 달리하는 $La_2O_3/HfO_2$의 나노 층상조직 구조(두께 10 nm)를 금속 - 절연체 - 금속 (MIM) 구조로 제작 하였다. ALD는 좋은 comformality와 넓은 지역 균일성을 가지며, 원자수준의 두께를 조절할 수 있다는 장점을 갖고 있다. 또한, 다양한 화학 물질들을 이용한 복합적 계층구조를 만들 수 있는 점과 $HfO_2$ 및 $La_2O_3$ 계층의 수직 위치를 정확하게 조절할 수 있는 점으로 본 연구에 적합한 증착 방법이다. HfO2 속에 $La_2O_3$ 층을 깊이에 따라 삽입함으로써 $HfO_2$ 계층에 La 도핑의 효과와 더불어 TiN 하부 전극 위의 $La_2O_3$과 $HfO_2$의 차이점을 확인 하였다. $HfO_2$은 $250^{\circ}C$에서 TDMAH와 물을 사용하여, $La_2O_3$은 동일한 온도에서 $La(iPrCp)_3$와 물을 사용하여 제작되었다. 화학적 구성 및 binding 구조는 X선 광전자 분광법 (XPS)을 통해 분석하였다. 전기적 특성(유전 상수 및 누설 전류)은 Capacitance-Voltage (CV)와 Current-Voltage (IV) 측정으로 확인하였다. 결과적으로, $La_2O_3$ 또는 $HfO_2$을 한 종류만 사용한 절연층의 전기적 특성보다, $La_2O_3/HfO_2$의 나노 층상조직 구조가 더 나은 특성 (누설 전류 밀도 : $5.5{\times}10^{-7}\;A/cm^2$ @-1MV/cm, EOT : 14.6)을 갖는다는 것을 확인했고, 더불어 $La_2O_3$의 흡습 성질로 인한 화학 구조와 전기적 특성의 일부 차이를 확인하였다. 본 연구에서는 $HfO_2$ 속에 $La_2O_3$층이 TiN 하부 전극 바로 위에 위치할 때, 즉, 공기 중에 노출되지 않은 $La_2O_3/HfO_2$ 구조에서 가장 좋은 특성의 MIM capacitor를 얻을 수 있었다.
The electrochemical behaviors of dissolved hydrogen and hydrogen peroxide at a platinum disk electrode were investigated in boric acid solution by potentiostatic polarization method at the temperature of 25 and $200^{\circ}C$. The oxidation of dissolved hydrogen at $25^{\circ}C$ was kinetically controlled reaction, the rate of which depends upon the electron transfer on the electrode surface. As temperature was raised, however, the electrochemical characteristics of dissolved hydrogen were changed from a kinetically controlled reaction to a diffusion controlled one. One notable feature, with dissolved hydrogen at high temperature, is that an abnormal potential range was observed, where the oxidation rate of dissolved hydrogen rapidly decreased just before starting potential of water oxidation. We think it is caused by the deactivation of the electrode that results from the adsorption of hydroxyl ion on the surface of the platinum disk. On the contrary, a definite change with temperature was not identified in the case of the hydrogen peroxide except for the increase in current density that was due to the increasing diffusion coefcient with an increase of temperature.
Kim, Jang-A;Kulkarni, Atul;Hwang, Tae-Hyeon;Kim, Tae-Seong
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.199-199
/
2012
최근 그래핀의 대면적 합성 및 롤투롤 전사 공정의 개발로 그래핀의 상용화가 가시화 되고 있다. 하지만, 그래핀의 독특한 특성인 선형적이고 밴드갭이 없는 에너지 띠 분포 때문에 반도체 소자로서의 직접적인 적용에는 한계가 있다. 이러한 문제를 해결하기 위한 돌파구로써, 그래핀 복합체의 연구와 개발이 활발히 진행되고 있으며 본 연구에서는 그래핀 복합 적층 구조를 다룬다. 이는 디스플레이, 초고속 반도체 소자, 고성능 광전자소자 및 초고감도 센서 등 다양한 분야에 대한 그래핀의 실용화 가능성이 높아진 것을 의미한다. 특히, 높은 가시광 투과도와 낮은 면저항으로 기존 투명 전극에 대표적으로 사용되고 있는 ITO (Indium Tin Oxide)를 그래핀으로 대체하는 것에 관한 연구가 활발히 진행되고 있다. 하지만 그래핀이 높은 전자이동도를 가지는 것에 비하여 비저항과 투과도 측면에 있어서는 ITO의 성능을 뛰어넘지 못하는 실정이다. 따라서 본 연구에서는 ITO가 가지는 취약점인 기판과의 약한 접착력, 높은 취성, 기판과의 열팽창률 차이 등의 공정상 문제점을 극복하고자 하였다. 그래핀 복합 적층 필름은 플라스틱 기판 (PET) 위에 열 화학기상증착법(Chemical Vapor Deposition, CVD)을 이용하여 합성한 그래핀을 전사하고, ITO 용액을 도포한 다음 다시 그래핀을 씌워 제작하여 샌드위치 구조(sandwich structure)를 형성하였다. 완성된 필름은 광학적, 전기적 특성 분석을 수행하였다. 광학적 분석으로는 라만 분광을 이용한 그래핀 품질평가와 파장대에 따른 광 투과도, 그리고 반사도 측정을 하였으며, 전기적 특성은 면저항을 측정함으로써 분석한다. 결함이 적고, 대면적에 걸쳐 한 층을 이루어야 하는 고품질 그래핀의 요구사항에 따라 라만 분광의 G, 2D, D 띠를 분석하였다. G와 2D 띠의 비율을 통해 그래핀의 층 수를, D 띠의 강도를 통해 결함의 유무를 판단하였다. 또한, 가시광 영역에서 90% 이상의 광 투과도를 보여야 하는 투명 소자의 요구사항 달성 정도를 UV-VIS를 이용하여 확인하였다. 마지막으로, 제작한 필름의 면저항 또한 4-프로브 멀티미터를 이용하여 측정하고, 일반적인 터치스크린의 면저항인 $500{\Omega}/sq$를 만족하는지 평가하였다.
바이오센서는 효소(enzyme), 생분자(biomolecule), 항체(antibody), 세포(cell) 등의 biological agent를 인지 물질(recognition material)로 하여 측정하고자하는 분석 대상(analyte)과 높은 선택성으로 반응을 일으키게 하여 그 결과를 기존의 물리, 화학센서로 감지 해내는 방식이므로 기존의 의료용 화학센서를 대체하는 추세이다. 바이오센서가 기존의 센서와 구별되는 점은 생물질의 선택적인 반응 및 결합을 이용하는 것이므로 바이오센서의 실용화에 있어서 가장 중요한 것은 생체 반응 물질의 고정화 기술과 고정화막의 선택이라 할 수 있다. 일정전압법을 이용한 요소센서는 많이 연구되어 오고 있으나 낮은 농도에서의 감도저하에 따른 단점으로 상용화에 이르지 못하고 있다. 본 논문은 요소센서의 이용하기 위한 고정화막으로 3-mercaptopropionic acid 자기조립 단인층의 전기화학적 특성을 고창하였다. 자기조립 단일층은 직접적인 전자전달로 인하여 낮은 요소 농도에서 뛰어난 강도와 빠른 반응 시간을 보였으며, 특히 다공질 실라콘을 기질로 사용한 경우 평면 전극 보다 약 3배의 감도 증가 효과를 가져왔다. 자기조립 단일층의 표면 분석은 X-ray photoelectron spectroscopy(XPS)를 이용하였다.
Transactions of the Korean hydrogen and new energy society
/
v.24
no.2
/
pp.107-112
/
2013
The ZnO is able to produce hydrogen from water however it can only absorb ultraviolet region due to its 3.37eV of wide band gap. Therefore efficiency of solar hydrogen production is low. In this work we report investigation results of improved visible light photo-catalytic properties of CdSe quantum dots(QDs) sensitized ZnO nanorod heterostructures. Hydrothermally vertically grown ZnO nanorod arrays on FTO glass were sensitized with CdSe by using SILAR(successive ionic layer adsorption and reaction) method. Morphology of grown ZnO and CdSe sensitized ZnO nanorods had been investigated by FE-SEM that shows length of $2.0{\mu}m$, diameter of 120~150nm nanorod respectively. Photocatalytic measurements revealed that heterostructured samples show improved photocurrent density under the visible light illumination. Improved visible light performance of the heterostructures is resulting from narrow band gap of the CdSe and its favorable conduction band positions relative to potentials of ZnO band and water redox reaction.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.