Journal of the Korean Society for Marine Environment & Energy
/
v.4
no.4
/
pp.21-31
/
2001
When an oil-spilling accident occurs at sea, it is of the primary importance to predict the amount of oil leakage for the swift response and decision-making. The simplest method of oil-leakage estimation is based on the hydrostatic pressure balance between oil inside the tank and seawater outside of leakage hole, that is the so-called Torricelli equilibrium relation. However, there exists discrepancy between the reality and the Torricelli relation, since the latter is obtained from the quasi-steady treatment of Bernoulli equation ignoring viscous friction. A preliminary experiment has been performed to find out the oil-leaking speed and shape. Soy-bean oil inside the inner tank was ejected into water of the outer tank through four different leakage holes to record the amount of oil leakage. Furthermore, a CFD (Computational Fluid Dynamics) method was utilized to simulate the experimental situation. The Wavier-Stokes equations were solved for two-density flow of oil and water. VOF method was employed to capture the shape of their interface. It is found that the oil-leaking speed varies due to the frictional resistance of the leakage hole passage dependent on its aspect ratio. The Torricelli factor relating the speed predicted by using the hydrostatic balance and the real leakage speed is assessed. For the present experimental setup, Torricelli factors were in the range of 35%~55% depending on the aspect ratio of leakage holes. On the other hand, CFD results predicted that Torricelli factor could be 52% regardless of the aspect ratio of the leakage holes, when the frictional resistance of leakage hole passage was neglected.
Journal of the Society of Cosmetic Scientists of Korea
/
v.30
no.4
s.48
/
pp.525-532
/
2004
N-acyl taurates are known as environmental-friendly and non-irritating to skin. In this study, the physicochemical properties of N-acyl taurates, which are amide-type anionic surfactants, were measured and also compared with sulfate-type anionic surfactants that show low biodegradability and are highly irritating to skin. The possibility of replacing the currently existing sulfate-type surfactants by N-acyl taurates was examined. Based on the experimental results, shampoos were formulated with these anionic surfactants and their stability and properties were measured. The possibility of application of amide-type surfactants to personal care cleaner was evaluated. Experimental results show that N-acyl taurates have various favorable aspects in making personal care cleanser: high viscosity, low surface tension, and low CMC values. These properties of N-acyl taurates generate nano-scale particles in emulsion, which is stable due to its high viscosity. This emulsion also has good cleaning ability with small amount of usage due to easy penetration into contaminants. Shampoo with N-methyl oleyl taurate showed high yield point and constant viscosity, and formed stable emulsion with nano- scale uniform particles. These results suggest that N-acyl taurates play an important role in making stable Interior structure in shampoo, and which improves the storage property.
Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
/
2003.04a
/
pp.135-136
/
2003
알코올 분무, 셀로판지 부착 등의 표면처리가 포장김치의 표면갈변과, pH, 산도, 균수 및 관능적 품질에 미치는 영향을 조사하였다. 실험에 사용된 포장김치는 200 g 들이 플라스틱 용기에 김치를 담은 후 무처리, 70% 알코올로 표면을 1회 분무한 것, 김치표면에 폴리에틸렌필름(두께 0.04 mm)을 부착하여 저장실 (10$\pm$1$^{\circ}C$)에서 21일간 저장하면서 3일 간격으로 조사하였다. 그 결과, 무처리와 알코올을 분무한 경우는 저장 15일째에 pH가 4.0수준에 도달하였으나 김치표면에 polyethylene film을 부착한 경우는 21일째까지도 pH가 4.0 이상을 유지하였다. 산도의 경우도 pH와 동일한 경향을 나타내어 polyethylene film으로 표면처리함으로서 김치의 숙성이 지연되었다. 무처리와 알코올을 처리한 것은 12일째부터 김치표면이 갈변하기 시작하였으며 18일째는 그 갈변정도가 심하였다. 그러나 polyethylene film을 표면에 부착한 경우는 저장 21일째까지도 갈변정토가 미약하였다. 저장기간에 따른 총균수의 변화는 무처리와 알코올을 처리한 경우가 polyethylene film을 부착한 경우에 비하여 증가폭이 컸으나 젖산균수는 반대로 polyethylene film을 부착한 경우가 무처리 또는 알코올을 분무한 경우에 비하여 높아 김치의 품질이 양호하였다. 무처리와 알코올을 분무한 김치의 표면에는 저장 15일 이후에 산막표모 및 곰팡이의 균사체가 번식하는 김치도 발견되었다. 처리별 이미 및 이취의 발생정도를 조사한 결과 무처리와 알코올을 처리한 경우는 저장 15일경에 특히 용기 표면에 위치하는 김치에서 이미와 이취가 있었으나 polyethylene film을 부착한 경우는 이미와 이취가 전혀 나타나지 않았다.채반에 넣고 밀도를 측정한 결과 1.002g/㎤을 나타냈다. 즉 물의 이론밀도인 1g/㎤에 근접한 값을 보여 정확한 밀도 계측이 가능한 것으로 판단되었다. 또한 밀도 계측시스템의 측정 반복간 정밀도를 파악하기 위해 수박 6개를 임으로 선정하여 3반복 측정 시험한 결과, 측정표준편차가 0.001~0.004g/㎤로 해상도보다는 다소 높았으나 대체로 양호한 결과를 나타냈다. 수박 35개를 이용하여 개발 계측시스템과 사람이 직접 부력법으로 밀도를 측정 비교한 결과, 계측시스템에 의해 측정된 수박 밀도가 사람이 측정했을 때 보다 낮게 측정되었다. 수박의 외관인자(무게, 길이, 직경, 체적), 밀도와 당도의 상관관계 구명시험을 위해 원예연구소 시험포장에서 재배된 삼복꿀수박 총 74개를 공시재료로 하였고, 시험은 출수일별로 10~14개씩 수확하여 외관인자, 밀도, 당도를 각각 측정하고, 이들 인자들간의 상관관계를 구명하였다. 외관인자들간에는 높은 상관관계를 보였으나, 외관인자들과 밀도, 외관인자들과 당도, 밀도와 당도와는 매우 낮은 상관관계를 나타냈다. 점성에 영향을 미치는 가장 주요한 조건이라고 생각된다.환원당인 sucrose 함량은 계속 증가하였고 fructose, glucose, sorbitol의 함량(추황의 sorbitol을 제외)은 생장이 촉진됨에 따라 증가하다가 다시 점차적으로 감소하였다. 이러한 결과는 총당과 환원당의 측정결과와 일치한 것으로 나타났다. 결론적으로 배의 성장에 따라 산 함량은 감소하였고 당 함량은 증가하였다.luco-pyranoside, quercetin 7-O- -glucopyranoside, acacetin 7-O-$\beta$-D-glucuronide and apigenin-6-C-$\beta$-D-glucopyranosyl-8-C-$\b
Proceedings of the Korean Society of Propulsion Engineers Conference
/
1998.10a
/
pp.3-3
/
1998
액체추진제 로켓엔진 연소실에는 고유모드에 대응하는 음향파동이 내재되며 이러한 음향파동은 연소와의 상호작용을 통하여 불안정한 음향에너지를 공급받아 증폭되며 결국에는 연소불안정 상태에까지 이르게 된다. 이와 같은 불안정한 상태에 이르기 위해서는 연소로부터 되먹임되는 불안정 에너지의 양이 충분히 크고 구동 음향파동에 근접한 위상을 가져야 한다. 이와 같은 구동 메커니즘을 구성하는 상세한 물리적 현상들을 규명하고 예측하기 위한 많은 연구들이 보고되었으며, 이들 중 이론적인 시간 지연 모델을 사용하는 음향적인 방법은 매우 경제적인 반면 연소 현상에 대한 상세한 모사가 생략되어 연소 불안정의 구체적인 원인을 규명하는데 어려움이 있고, 파동 방정식에 의하여 연소실 내부의 파동 에너지 증가를 예측하는 방법은 연소기 내에서의 연소 메커니즘에 대한 고려 없이 연소에 의해 발생하는 에너지만을 포함하는 단점과 선형적인 연소 불안정에만 제한된다는 제한이 있다. 음향장과 커플된 기화반응 모델은 분무액적의 기화 과정이 추진제 연소의 지배과정이라는 가정 하에 연소응답을 기화반응으로 대체하는 방법으로, 역시 단시간 내에 결과를 얻을 수 있다는 장점이 있으나 기화반응으로부터 음향파동으로의 에너지 되먹임 과정이 배제되어 있어 정확한 결과를 구하기는 어렵다. 이에 대하여 최근에는 전산 모사적인 방법을 사용하는 대규모의 연소장 해석이 가능하여 짐으로써 음향파동에 의한 외란과 에너지 되먹임과정을 모두 포하마여 수치적인 방법을 사용하여 계산하는 액체추진제 로켓엔진의 고주파 연소불안정 해석방법들이 제시되고 있다.안정성 모드가 있음을 보였다. 밀도 변화가 있는 경우나 밀도 변화가 없는 경우 모두 sinuous 모드의 가장 불안정한 모드가 varicose 모드의 가장 불안정한 모드보다 더 불안정함을 보여주어 후류 유동은 자유 유동에 가까운 위상 속도를 가지는 sinuous 모드에 의해 지배될 것임을 예측할 수 있다. 연소반응이 완전연소에 가까울수록 그리고 압축성 효과가 클수록 유동내부의 온도가 증가하고 점성 또한 증가하여 후류유동은 안정됨을 알 수 있었다 유동변수들의 contour로부터 유동의 특성을 예측한 결과 baroclinic 항이 dilatational 항보다 상대적으로 크며, 중심선 상하에 생기는 vortex를 더욱 성장시킬 것으로 생각된다.냉각 홀의 막임, 연소 입자의 점착 부위 등을 예측하여 보완책을 준비할 수 있도록 하였다.$mm^2$sec였으며, 이는 다른 graphite/epixy 복합재의 확산계수와 유사한 값을 나타내고 있다. 또한 추진제가 충전된 연소관을 절단하여 밀폐한 후 95%RH 습도 조건에 보관함으로써 연소관 내부의 추진제 기계적 특성에 미치는 침투된 습기의 영향도 함께 고찰하였다. 추진제에 따라 차이는 있겠으나 추진제가 충전된 연소관은 순수 복합재 연소관에 비해 습기의 투과 정도가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..
Journal of the Computational Structural Engineering Institute of Korea
/
v.33
no.1
/
pp.9-16
/
2020
The objective of this study is to propose closed-form solutions to the free vibration response of single-degree-of-freedom (SDOF) systems, as part of fundamental research on dynamic systems with Coulomb friction. The motion of a dynamic system with Coulomb friction is described by a nonlinear differential equation, and, due to the variation in the sign of friction force term with the direction of motion, it is difficult to obtain the closed-form solution. To solve this problem, the nonlinear differential equation is directly computed by numerical integration, or an approximated solution is indirectly obtained using a linear differential equation wherein the damping effect due to Coulomb friction is replaced by an equivalent viscous damping term. However, these conventional methods do not provide a closed-form solution from a mathematical point of view. In this regard, closed-form solutions to the free vibration response of SDOF systems with Coulomb friction are derived herein by considering that the sign of the friction force term is reversed in each half-cycle of motion and by expanding it to the entire time history using the power series function. In addition, for a given initial condition, both the number of free vibration half-cycles and the response at the instant when free vibration motion stops are predicted under the condition that the motion of free vibration is stopped when the amplitude of the friction force is higher than that of the restoring force due to stiffness.
The effects of soy protein isolate (SPI) and red bean protein isolate (RBPI) on gelling properties of pork myofibrillar protein (MP) in the presence of microbial transglutaminase (MTG) were studied at 0.45 M NaCl. MP paste was incubated with MTG (0.1%) at various levels (0.1, 0.3, 0.5, and 1%) of SPI and RBPI before incubating at $4^{\circ}C$ for 4 h. The rheological property results showed that MP gel shear stress increased with increasing RBPI concentration. Cooking yield (CY) of the MP gel increased with increasing RBPI and SPI, whereas gel strength (GS) was not affected by adding RBPI or SPI. Thus, effects of incubation time (0, 4, 8, 10, and 12 h) were measured at 0.1% SPI and RBPI. GS values of the MP gel at 10 and 12 h were similar and were higher than those of the others. CY values were highest when RBPI (0.1%) was added, regardless of incubation time. The protein patterns indicated that incubating the MP with MTG for 10 h resulted in protein crosslinking between MP and RBPI or SPI. Based on these results, RBPI and SPI could be used as an ingredient to increase textural properties and cooking yield of meat protein gel.
This paper presents the rheological properties of bitumen for reducing negative skin friction. The bitumen has been widely used due to both the cost and construction effectiveness. Also, it is well known that the use of bitumen for reducing negative skin friction renders the best results among other available methods. Three different modified bitumens were used for the testing programs. The physical tests include the penetration, the softening point and penetration index. The rheological tests include phase angle, complex modulus, creep tests and flow tests. The tests were conducted at four different temperatures(15, 30, 45 and 6$0^{\circ}C$) in order to simulate the field condition. The test results were analyzed using the phase angle, G$^*$/sin $\delta$, creep compliance and shear viscosity. The result of tests showed that the phase angle increased and G$^*$/sin $\delta$ decreased with the increase of temperature. The creep compliance increased as the loading time increased. The difference of the creep compliance is detected as the time and temperature are varied, however, the difference of the shear viscosity is not significant among the samples tested in this study. The rheological properties of the bitumen also showed that the physical testing method and the temperature dependant testing method are somewhat limited to showing and expressing the full rheological properties of the modified bitumen. The introduction of the time and the temperature dependent testing method is necessary to find out the full rheological properties of the modified bitumen.
Stone column is a soil improvement method and can be applicable for loose sand or weak cohesive soil. Since the lack of sand, stone column seems one of the most adaptable approach for poor ground as a soil improvement technique. However, this method was not studied for practical application. In this paper, the bearing capacity of single stone column at the Gaduk, Ulsan and Gwangyang under the bulging and general shear failure mode were compared with those of the suggested formulas. Especially, a test result of single stone column at the Busan area by static load was compared with the bearing capacity of suggested formulas. The analysis results showed that there were not much bearing capacity differences among those suggested bearing capacity formulas. However, the bearing capacity by static load test was almost double of those with suggested formula. The result also showed that the undrained shear strength was the most important parameter for the bearing capacity estimation of stone column.
Two species of halophilic bacteria were isolated from five salted seafoods and identified by 16S rDNA sequencing homology. One was identified as Halomonas subglaciescola and other four strains were belong to Halomonas marina. The identity of all isolates with standard organisms was above $95\%.$ H. subglaciescola, H. marina IN, and H. marina SH-2 grew in salinity condition from $3%\;to\;18\%$ NaCl but growth of H. marina SQ and H. marina SH-l grew in salinity environment from $8\%\;to\;17\%.$ Maximum biomass of H. subglaciescola, H. marina IN, H. marina SQ, H. marina SH-1, and H. marina SH-2 growing in LB medium containing $15\%$ NaCl were about 3.2, 4.5, 4.5, 5.7, and 4.2, however the maximum biomass in LB medium containing $5\%$ NaCl were about 2.2, 1.1, 0.7, 0.2, and 2.4 as optical density at 660 nm, respectively. In scanning electron micrograph, unknown material (mucus) attached to outer membrane of all isolates was observed. When mucus isolated from halophilic bacterial cell was added to culture of E. coli, E. coli grew in medium containing $15\%$ NaCl.
Suction drain method can directly apply vacuum pressure to the soft ground through vertical drains so it can make hardening zones around them. These hardening zones make steeply lower the discharge efficiency of the pore water with decreasing permeability. This paper considered a stepped vacuum pressure to minimize a hardening zone which is one of the important parameters that can decrease discharge efficiency. A series of laboratory tests were conducted in order to examine the effect of the hardening zones and to evaluate their effects to the ground improvements with varying durations which applied stepped vacuum pressures(-20kPa, -40kPa, -60kPa and -80kPa) with Busan marine clay. According to strength(CPT), water content test and theoretical investigation indicate a size of the hardening zone within 7cm and the decreasing ratio of permeability about 2.0~4.0. Also, the total settlements are larger for the stepped vacuum pressure than the instant vacuum loading. The application time with vacuum pressure is determined considering the geotechnical properties of the interested clays. Results of numerical analysis show that consolidation behavior is appropriate to measurement for considering hardening zones.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.