• Journal of the Korean Geotechnical Society
• /
• v.26 no.1
• /
• pp.35-43
• /
• 2010

The behavior of the Top-Base foundation was investigated by carrying out 3D finite element method. Special attention is given to the settlement behavior of concrete Top-Base foundation due to the consolidation settlement of the embedding depth and the effect of footing dimensions which are not included in the practical design. To obtain the detailed informations, a series of numerical analyses were performed for different pile configurations. It is shown that as the number of piles in a group increases, the calculated settlement also increases. However, for the $7\times7$ group, there is no further increase in settlement. Based on this study, it is found that the total settlement of Top-Base foundation is highly influenced by the consolidation settlement and footing configurations. It is also found that the current design method overestimates the settlement, and thus, needs to be modified and supplemented.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.3
• /
• pp.15-22
• /
• 2003

The appropriate description of the stress-anisotropy and time-dependent behavior of cohesive soils is very important in representing the real soil behavior. In this study, two constitutive relations have been incorporated based on the generalized viscous theory: one is the plastic constitutive relation adopted to capture the stress-anisotropy with a few model parameters; the other is the rate-dependent constitutive relation adopted to describe the strain rate-dependent behavior, an important time-dependent behavior in cohesive soils. The incorporated and proposed constitutive model has relatively a few model parameters and their values need not to be re-evaluated at different strain rates. The proposed model has been verified and investigated with the anisotropic triaxial test results obtained by using the artificial homogeneous specimens.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1078-1085
• /
• 2005

1990년 이래 낙동강 하구 서쪽지역인 서부산과 인근 지역에서는 대단위 지반조성공사가 수행되었다. 이 지역에서는 부산점토라고 명명된 점성토가 20-70m의 두께로 상당히 두텁게 형성되어있다. 최근에 들어 정교한 지반조사가 수행됨에 따라 이 지역의 점토에 대한 공학적 특성이 효과적으로 밝혀졌지만, 점토의 특성을 면밀히 규명하기 위해서는 여전히 많은 과제가 남아있다. 본 논문에서는 부산신항 지역에서 점토에 대하여 다양한 방법으로 투수계수를 구하여 투수특성을 규명하고자 한다. 이를 위하여 수평 및 연직방향의 배수에 의한 일정변형률(CRS) 압밀실험, 표준압밀실험 및 압밀 중에 변수위 투수실험이 실내실험으로 이루어 졌으며, 현장실험으로 CPTU에 의한 소산실험 및 Casagrande형 피에조미터에 의한 소산실험이 실시되었다.이들 결과를 서로 비교하여 합리적인 실험결과를 분석하며, 이점토에 대한 깊이별 투수계수 및 투수 이방성을 규명하고자 하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.4
• /
• pp.5-12
• /
• 2024

In the case of creating a site in the reclaimed land (public waters), due to the nature of the coastal sedimentary ground, large-scale construction materials are required, It is necessary to utilize soft clay, which is inevitably generated during construction of the complex, as a fill material in terms of resource recycling and economic aspects (reducing the amount of embankment required). In this study, changes in the consolidation characteristics of cut-out disturbed soft clay due to the recycling of soft clay soil were identified, and a consolidation settlement design plan was proposed. Through the results of the consolidation test of the study site, the change in consolidation characteristics (compression index reduction, precede load uncountable) due to disturbance (cutting) was confirmed, the method of calculating (consolidation settlement) the filling clay layer as the composite target layer (consolidation target layer, loading load layer) was analyzed as a result consistent with the actual behavior.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1159-1162
• /
• 2010

연약지반 문제를 해결하기 위한 방안으로 세계 각국에서 연약지반 개량공법의 하나인 연직배수공법이 주로 사용되고 있다. 연직배수공법은 연약한 점성토 지반 내에 인공적으로 연직 배수재을 다수 설치하여 배수거리를 단축시킴으로써 압밀을 촉진시키고, 그에 따른 강도증가 효과를 얻을 수 있는 공법이다. 연직배수재로 경제성과 시공성이 우수한 PBD가 널리 사용되고 있다. PBD 시공품질은 시공 깊이, 압력, 수직도 등에 영향을 받을게 된다. 본 논문에서는 PBD 시공시 배수재의 시공 심도, 압력, 수직도를 자동측정하여 작업자가 실시간으로 모니터링 할 수 있고 시공결과를 자동 저장하는 시스템을 개발하였다. 개발된 시스템은 시공 불량 요인이 발생시 자동 경고하여 불량률을 줄일 수 있고, 장비의 이상 발생시 자동 제어시스템을 가동하여 작업의 안전성을 확보하도록 하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.922-929
• /
• 2009

In this paper, 4 representative soft clayey soils in south Korea are selected to estimate the geotechnical characteristics and provide the instructions avaliable for construction works; Inchon Coast, Kum River Estuary, Kwangyang Bay, and Nakdong River Estuary. Total 2250 boring data are collected to construct the data base system on selected areas from Korea geotech DB system, scientific journals, theses, and site investigation reports. Considering the geological, topographical and regional features, geotechnical properties, deformation and strength characteristics of 4 soft clayey soils are evaluated by analyzing the constructed DB system statistically.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.11b
• /
• pp.35-48
• /
• 1999

The Nakdong River in Korea has formed a delta area .called the Kimhae Plain near the river mouth. Its clay deposit is unusually thick (up to 60m) compared with the clays deposited in other parts of the world. Some parts of the area has been reclaimed with the height of approximately 5 to 7m after installing vertical drains for the development of important new industrial complexes. Settlement measurements were taken during the reclamation works on the soft ground, and it was revealed that the measured settlements were extremely higher than predicted. This paper discusses possible reasons on unusual large settlements from depositional environments of Kimhae clay.

• Geotechnical Engineering
• /
• v.10 no.3
• /
• pp.41-54
• /
• 1994

This study aims at investigating the mechanism and operation of cubical triaxial test developed by Lade in order to obtain analysis on the clayey foundation deformation. A comparison on deviator stress, pore water pressure and stress path is made between test results of clay using the cubical consolidated undrained test as well as plane strain test.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.49-58
• /
• 2004

The cone pressuremeter test (CPM) is a new in-situ test which combines a standard cone penetration test with a pressuremeter. The cone pressuremeter tests in clay are presented and analyzed. An analytical solution of CPM incorporated non-linear soil behavior with no volume change is presented, and curve fitting technique is proposed to make use of both the loading and unloading portions of the pressuremeter test. The proposed method is accomplished by putting greater emphasis on the unloading portion. Twenty CPM tests are analyzed using the proposed method, and the derived undrained shear strength of soil is compared with other tests such as field vane tests and laboratory tests. The interpreted soil parameters had resonable values when compared to other in-situ and laboratory test results. The cone pressuremeter has provided reliable measures of undrained shear strength using curve fitting method.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.6
• /
• pp.85-95
• /
• 2007

In this study, in order to propose the prediction method of the residual settlement of clayey ground improved by vertical drains, a series of numerical analyses for a model ground were carried out using the elasto-viscous consolidation model. And the effects of ground improvement conditions of the ratio of effective radii $(r_e/r_w)$, consolidation pressure $({\Delta}p)$ on normally consolidated state, and the OCR (overconsolidation ratio) on overconsolidated state to reduce the residual settlement in three-dimensional consolidation by vertical drains were investigated by performing a series of numerical analyses. Furthermore, based on the results of a series of numerical analyses for the model ground, the predicting method of the residual settlement of clayey ground with vertical drains and the determination method of the value of OCR required to control the residual settlement within an acceptable value are proposed.