• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.715-717
• /
• 2014

In recent wireless communication systems such as Long Term Evolution-Advanced (LTE-A) system, to transmit large multimedia data, high order modulations including 64-ary quadrature amplitude modulation (QAM) are adopted. However, performance of the modulation depends on the signal constellation in the same modulation order. Therefore, a symbol error rate (SER) expression of optimal performance is necessary for analyzing the SER performance of various signal constellation. The optimal signal constellation based on error bound has been previously described, but an exact SER expression has not been derived. In this paper, we propose an exact SER expression of optimal signal constellation for 64-ary QAM.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.607-610
• /
• 2003

지문 정합을 할 때 특징점 사이의 거리와 각도가 유사한 순서대로 있는가를 비교하는 알고리즘을 제안한다. 한 점에서 가장 가까운 특징점을 찾고 다시 찾은 점에서 가장 가까운 특징점을 찾는데 이러한 세 개의 특징점들 사이의 거리와 끼인 각도를 기본 요소로 하여 이들의 순차를 특징점 배치도로 정의하여 등록지문에도 유사한 순차가 있는지를 검사한다. 정합 시에 특징점 사이의 거리, 각도 순차가 있는가를 검사하기 때문에 중심점을 찾지 않아도 되며 지문의 이동, 회전에 영향을 받지 않는다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.132-136
• /
• 2001

본 논문은 이산 점 자극들을 불연속적인 형태로 배치할 때 나타나는 연속성을 인식하기 위한 시스템을 제안한다. 제안된 시스템은 시각 신경계의 특징 추출 과정을 근거로 한다. 일련의 이산점 자극들이 배열의 형태로 주어질 때 이들은 개별 점으로 인식하기보다 어떤 형태를 가진 선이나 윤곽들로 인식된다. 우리는 이산 점 자극의 이러한 연속성 문제를 인식하기 위해 실험에서는 거리가 다른 여러 개의 점들을 일정한 간격을 갖는 형태로 배치한 후 이를 인식하는 시스템을 제시한다. 이산 점 자극에서 연속성을 인식하는 문제는 기초 시파 실험과 관련된 문제로서 일종의 시각적 착시이다. 실험 결과에서는 이산 점 자극에서 연속성을 갖는 윤곽을 획득함으로서 제안된 시스템의 타당성을 확인한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.29-40
• /
• 2002

In photogrammetry, the accuracy is analyzed by using the coordinate of the targeted position determined by the geometric principle, thus, the reliability depends on the accuracy of the coordinate of the targeted position. Thereby, geographic surveying is essential to perform such tasks, and it requires approximately $30{\sim}50%$ of total cost and times to produce a finalized map. The main purpose of this study is to determine the configuration of the disposition of minimum datum points and their configuration, which were determined by surveying values available through using the structure of block model based on the aerotriangulation. ortho projection image was produce and digital topographic map was achieved by the optima model(CASE7). We also performed comparative analysis about the result of local datum point and the accuracy of overlapping based on the surveying results. Consequently, it is possible to analyze the unknown position accurately with the optimal model., CASE 7, which is the minimum datum points configuration required to block adjustment. Furthermore, this optimal model, which provides the minimum datum points, results costs and time saving effects compared to the previous methodology.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.295-296
• /
• 2009

국내에 도입된 라인센서방식의 디지털항공카메라 ADS40영상을 활용하여 항공삼각측량을 수행하는데 있어 기준점의 수량 및 배치를 달리하여 성과를 분석한 결과는 모든 방법에서 국토지리정보원 항공사진측량작업내규에서 요구하는 정확도를 확보할 수 있었고, 기준점의 배치가 조밀하면 좀 더 양호한 성과를 확보할 수 있음을 확인했다.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.133-140
• /
• 2008

In this paper, we analyzed the accuracy of orbit modeling with various control point configurations and adjustment unknown parameter sets. We used 152 GCP points acquired from GPS surveying, which were distributed from Choon-chun to Nha-ju along 420km in distance. For orbit modeling, seven adjustment parameter sets were chosen to include parameters for satellite position, velocity and attitude angles at different degree of freedom. Firstly we determined the location of model point in seven configurations. Secondly we estimated model parameters for each parameter set and for each GCP configurations. Finally we applied the model to reference check points and analyzed its accuracy. We were able to find the unknown parameter set that produce best orbit modeling performance regardless of the configuration of model points.

• Communications for Statistical Applications and Methods
• /
• v.5 no.2
• /
• pp.327-338
• /
• 1998

이원배치모형에서 급내상관계수에 대한 점 추정문제가 고려된다. 급내 상관계수에 대한 여러 가지 점추정량의 종류를 살펴보고 추정량의 평균자승오차(MSE)과 절대편의를 모의 실험을 통하여 서로 비교하여 본다. 결론적으로 이원배치모형에서의 급내 상관계수는 추정량의 종류에 큰 영향을 받지 않는 것으로 나타났으며, 따라서 계산량이 다른 추정량들에 비하여 적은 헨더슨의 방법 $\textrm{III}$ 추정량을 사용하는 것이 바람직한 것으로 판명되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.103-112
• /
• 1990

For this study, the full-scale model of Chumsungdae was selected as an object, and various photographs were obtained with metric camera for forming circular strips and blocks. The accuracies were analyzed according to the change of object distance and different configuration of control points by bundle adjustment, and the characteristics of results obtained through combined strips were drawn. This thesis suggests optimal analysis technique of cylindrical structures requiring all-side analysis such as cultural properties. As a result, it is possible to use control points positioned on only any one-side for all-side analysis, and control configuration is more important rather than the number of control points for increasing accuracy. In addition, it is desirable to locate control points in X, Y and Z plane uniformly, and it was shown as object distance was shorten and the number of combined strips increases, the accuracy of results was improved considerably.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.8 no.1
• /
• pp.15-22
• /
• 1990

The purpose of this study is to suggest possibility to analyze the three-dimensional positions of the whole surface of an object simultaneously and precisely by close-range photogrammetry. For this purpose, the geometry of network, namely imaging geometry and control configuration etc was considered, and then the whole surface of the object was analyzed by bundle adjustment through forma. lion of strip and block with which cover the whole surface of the object. As a result, we were able to prove possibility of the whole surface analysis of an object and to extract characteristics of accuracies in accordance with the number and configuration of control points. Also as desirable accuracies were able to be acquired even by employing configuration of only a few control point stationed on a limited surface, it is expected that the difficulties of control surveying will be able to be reduced considerably.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.261-262
• /
• 2016

본 논문에서는 계기용변압기(Potential Transformer, PT) 1차권선의 절연내력을 향상시키기 위하여 전위분포가 일정하게 되도록 권선 배치를 최적화하는 프로그램을 작성하여 반복 분석하였다. 우선 기존의 권선 배치에 대한 국소점의 전계분포를 고찰하여 전계의 최대치를 구한 후, 권선 배치를 자동화된 순환 계산형 시뮬레이터를 제작하여 적절한 분포로 교정하고 최초의 기대 함수치를 극소화하는 형상을 반복 추적하는 알고리즘을 이용하였다.