• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.648-656
• /
• 1997

Thermal treatment of soymilk residue was carried out at 140, 150, and $160^{\circ}C$ for possible use as a raw material for dietary fiber, and some physicochemical properties of the extracts were investigated. Soluble dietary fiber(SDF) content of the extracts prepared under optimal conditions was more than 30% suggesting the conversion of insoluble dietary fiber to SDF. The main sugar components of the extracts were glucose, galactose, and arabinose. Analysis of the moelcular weight distribution by high performance size exclusion chromatography revealed that the proportion of high molecular weight fraction decreased and that of middle-sized polymer increased as the extraction temperature increased. The viscosity of aqueous solution of the extracts decreased with an increase in extraction temperature, but showed no trend as pH changed. The solubility increased with extraction temperature showing the highest at $160^{\circ}C$. The extract at $140^{\circ}C$ had the biggest calcium-binding capacity, which correlated with the changes in viscosity.

• Membrane Journal
• /
• v.28 no.5
• /
• pp.368-377
• /
• 2018

The n-nitrilotris(methylene) phosphonic acid (NTPA) potassium salt was synthesized as a draw solute for forward osmosis. NTPA-4K, NTPA-5K and NTPA-6K were synthesized by varying the content of KOH added to NTPA and confirmed by $^1H$-NMR and $^{13}C$-NMR. The osmotic pressure, viscosity, water flux and reverse salt flux were measured to characterize the draw solute. In the forward osmosis process when distilled water was used as a feed solution and 0.5 M of NTPA-4K, NTPA-5K and NTPA-6K were used as a draw solution, the water flux was 35.8, 38.8 and 42.2 LMH, the reverse salt flux was 5.4, 6.9 and 7.4 gMH, respectively. It was confirmed that the water flux was lower than the conventional NaCl draw solution, but the reverse salt flux was much lower. In order to recover the diluted draw solution, nanofiltration was conducted. The results showed that the draw solute could be retained by above 90%.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.135-140
• /
• 1998

Drag reduction produced by dilute solution of water soluble ionic polymer-surfactant complex under turbulent flow in a rotating disk apparatus(RDA) was investigated in this study. Three different molecular weights of polyacrylic acid(PAA) were adopted as drag reducing additives, and distilled water was used as a solvent. Experiments were undertaken to observe the dependence of drag reduction on various factors such as polymer molecular weight, molecular expansions and flexibility, rotating speed of the disk and polymer concentration. Specific considerations were put on conformational difference between surfactant and polymer, and effect of pH on ionic polymer possessing various molecular conformation through pH. The complex of ionic polymer and surfactant(Sodium Dodecyl Sulfate) behaves like a large polyelectrolyte. Surfactant changes the polymer conformation and then increases the dimension of the polymer. The radius of gyration, hydrodynamic volume and relative viscosity of the polymer-surfactant system are observed to be greater than those of polymer itself. Such surfactant-polymer complex has enhanced drag reduction properties.

• Korean journal of food and cookery science
• /
• v.16 no.4
• /
• pp.328-335
• /
• 2000

This study was investigated the effect of application methods of frying oil on the physicochemical properties of frying oil in the school foodservice. Frozen pork cutlet was fried for this study. The most frequent application methods of frying oil in school foodservice and treatments of this paper were as follows ; (A) use the frying oil (36ι) just one day(200ea.$\times$ 5times) (B) reuse the used oil(A method) once more adding 50%(18 ι) fresh oil after 3 or 5 or 7 days (C) reuse the used oil(A method) once more after 3 or 5 or 7 days. The major fatty acids of fresh oil were linoleic acid, oleic acid, palmitic acid, and linolenic acid in order to content. The viscosity of frying oil was increased gradually by increasing the number of frying times and storage period of frying oil after once used. Both redness and yellowness of frying oil showed similar trend to viscosity. As a result of this study, the application methods of frying oil in the school foodservice influenced on the physicochemical properties of frying oil, but acid and peroxide value were under the safety level of frying oil prescribed in the Health Social Affairs Ministry.

• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.249-258
• /
• 2020

The purpose of this study examined the succession by vegetation type after forest ecosystem restoration in the Baramjae area. Vegetation of the Baramjae area was classified using a survey of 81 sites from May to October 2019. The vegetation type was classified as Pinus densiflora community group with both Quercus mongolica community and P. densiflora typical community. The group unit was further classified as the Quercus dentata typical subgroup, Salix koreensis subgroup, and Q. mongolica typical subgroup. Such as Q. mongolica, Quercus variavilis in vegetation unit 1, Q. mongolica, Q. dentata in vegetation unit 2, P. densiflora in vegetation unit 3 and S. koreensis in vegetation unit 4 were shown a high importance value. The difference in species by vertical layer is explained by sere. Based on the vegetation type classification system, Detrended Correspondence Analysis was conducted to observe the trend of succession. Since restoration, vegetation unit 1 and vegetation unit 2 were considered to have developed the most extensive vegetation. In vegetation unit 2 and vegetation unit 4, many of the species found were in the early vegetation development in S. koreensis subgroup. Accordingly, vegetation in the Baramjae area can be categorized as a stepwise succession.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.321-326
• /
• 2001

The change of molecular weight inside and outside a capsule produced using coencapsulating technology was investigated. Chitosan and chitosanase were enveloped in this membrane and product released was a loaded the medium by the principle of size exclusion. The leakage of substrate corresponding to the agitation speed was controlled by adjusting the alginate and CaCO$_3$ concentrations. The optimal condition of alginate concentration and agitation speed were 0.5% and 40rpm, respectively. Membrane thickness and capsules diameter were 10 $\mu$m and approx. 3.0 - 1.5 mm, respectively. Molecular weight difference by concentration and alginate viscosity were of little significance. In accordance with the molecular weight distribution versus enzyme concentration relationship, low concentration of enzyme produced high molecular weight oligosaccharides. At a 1.5 mm capsule size the product diffusion rate to outer surface highest. The molecular weight distribution of the released oligosaccharides was ranged from 1000 to 6000 Da. More than 80% of the initial activity of encapsulated enzyme retained after 8hrs of reaction.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.61-68
• /
• 2010

Optical simulation methods were applied to the edge-lit LED backlight for LCD TV applications in order to optimize the optical structure of the light guide plate(LGP), and thus to improve the uniformity properties by removing the bright spots caused by LED's. The edge-lit LED backlight consisted of three white LED's with a lamp cover, a light guide plate, and a reflection film. When there was no pattern on the entrance side surface of the LGP, the illuminance uniformity was sensitively dependent on the distance d between the LED and the entrance surface. The illuminance uniformity increased with d but its increasing rate slowed down when d was beyond ~ 1.5 mm. When micro-patterns such as a lenticular lens array (LLA) or a serration pattern were formed on the entrance surface, the illuminance uniformity was improved substantially even for the case of very small d. At the same simulation condition, the lightguide with serration pattern showed a better uniformity than that with LLA pattern. Additional improvement could be achieved by changing the refractive index of the micro-patterns. These results suggest that using micro-patterns is a very effective way to reduce the bright spots due to their refracting function for the concentrated incident rays onto the LGP.

• Clean Technology
• /
• v.22 no.4
• /
• pp.232-240
• /
• 2016

Recently, various research studies have been conducted and many are in progress for the suitable alternative materials for ITO based touch screen panel (TSP) due to limitations in size and flexibility. Various researches from all over the world have been attempted to fabricate the fine electrode less than $5{\mu}m$ for the rapid developing of display technology. Research is also being carried out in metal mesh methods using the existing technologies and alternative materials at commercial level. However, by using the existing technologies certain discrepancies are observed like low transparency and low yield which also results in the distortion of patterns. For repairing the damaged pattern, the conventional laser CVD technique has also been used but there are some challenges observed in CVD technique like achieving a stable fine electrode of $10{\mu}m$ or less and avoiding the formation of satellite drops. To overcome these issues, a new printing process named Electrohydrodynamic (EHD) printing, has been introduced by which $5{\mu}m$ fine patterns can be printed in one step. This EHDA printing technique has been applied to print very fine electrodes of $5{\mu}m$ or less by using conductive inks of various viscosities. This study also presents the optimized process parameters for printing $5{\mu}m$ fine electrode patterns during experiments by controlling the applied voltage and supply flow rate. The $5{\mu}m$ repair electrodes were fabricated for repairing $50{\mu}m$ shorted electrode samples.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.760-766
• /
• 2014

Bead type super-absorbent resins to be used for release-control were prepared by modification of the inverse suspension polymerization, and their physical properties were characterized. Acrylic acid and acrylamide were used as monomers, and N,N-methylenebisacrylamide was used as crosslinker, controlling the viscosity of monomer solution by adding hydroxyethylcellulose (HEC). SEM studies of the synthesized beads verified that the bead surfaces had many pores with their diameters of several tens nm. The bead sizes were in the range of $500{\sim}3000{\mu}m$, depending on the viscosity of the monomer solution. Both absorbent amount and absorbent rate of the beads were inversely proportional to the bead size, and the maximum water absorbent amount of 1 g beads was determined to be ca. 170~200 g for 5 hrs. The absorbent rate was also dependent on pH change of the aqueous solution, exhibiting the maximum rate in pH ranging from 5 to 11. The absorbent rate decreased as the concentration of salt (NaCl and $MgCl_2$) or ethanol and ethylene glycol increased. Release time of the water absorbed into the bead resins was 700 hrs, confirming the usefulness of the resin for the good release-control materials.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.486-493
• /
• 2013

The structure, morphology, and physical properties of syndiotatic poly(vinyl alcohol) (s-PVA) gel spun fibers were investigated to prepare polymeric embolization coils. S-PVA was prepared by saponification of the poly(vinyl acetate)/poly(vinyl pivalate)(PVAc/PVPi) copolymer. The viscosity of s-PVA solutions showed shear thinning behavior and the solution formed a homogeneous phase. Based on shear viscosity change with concentration, the optimum dope concentration was selected as 13 wt%, after which s-PVA fibers were spun and the solvent was removed. The fibers were then drawn with a maximum draw ratio of 15. A polymeric embolization coil was made of the s-PVA gel-spun fibers. The fibers were wound densely onto rigid rod and then annealed at different annealing temperatures. The polymeric embolization coil annealed at $200^{\circ}C$ was similar to metallic coils and its shape was maintained well after extension. Overall, gel-spun PVA fibers performed well for the preparation of primary and secondary coils to replace metallic coils.