• FLOWER RESEARCH JOURNAL
• /
• v.19 no.3
• /
• pp.181-186
• /
• 2011

A new spray chrysanthemum cultivar 'Yellow Candy' was released by National Institute of Horticultural & Herbal Science (NIHHS), Rural Development Administration (RDA), in 2008. The cross was made in 2003 between 'Restone' and 'Lollipop'. Trials were conducted from 2006 to 2008 for the evaluation and selection of this cultivar, including shading cultures in summer and retarding cultures in spring. The natural flowering time of 'Yellow Candy' is late October, but year-round flowering is possible by photoperiodic control. It has pompon flower type with yellow petals and yellowish red flower center. The growth of plant is very vigorous. The diameter of flower is 4.3 cm. Number of flowers per stem and petals per flower are 8 and 184, respectively. Days to flowering under the short day treatment is about 58.5 and its vase life is 18.5 days in autumn season. 'Yellow Candy' was applied as No. 2009-177 on Feb. 18, 2009 for variety protection and the plant variety protection rights have been registered as No. 3247 on August 3, 2010 at the Korea Seed and Variety Service.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.23-29
• /
• 1989

In order to investigate developmental habit and morphology of maize tillers, time and location of tiller development. number of tillers per plant, tiller angle, height and diameter of tillers and root systems of tillers were examined under field condition for maize with tillers. Materials used were mostly from Korean local lines and a few lines from other countries were also included for comparison. The time of the first tiller development was about 18 to 20 days after emergence when planted on May in Yusong. The second tiller appeared about 4 to 5 days after the first tiller appeared. The tiller number per plant varied with lines and hybrids and ranged from two to ten. The location of tiller development was usually basal nodes of the main stem. Each tiller appeared to have its own root system. The angle between tillers and main stem was variable depending upon the maizes and the tiller angle could be classified into three categories. The height of tillers was also variable and seemed to be under genetic control. The most productive tillers were found among the Korean local derivatives.

• Pediatric Infection and Vaccine
• /
• v.23 no.1
• /
• pp.54-61
• /
• 2016

Purpose: Bacille Calmette-$Gu{\acute{e}}rin$ (BCG) lymphadenitis is a relatively frequent local adverse reactions after BCG vaccination. Its incidence rate is usually <1%. However, this rate may be different according to BCG strain, vaccination method or skill, etc. In the Republic of Korea, two BCG strains are used: intradermal Danish-1331 or percutaneous Tokyo-172. We surveyed the incidence rates of BCG lymphadenitis. Methods: This survey was performed in total 25 centers (5 general hospitals, 20 private pediatric clinics). Immunized type of BCG strain in study subjects was verified by directly observing the scar. The occurrence of BCG lymphadenitis was asked to their parent. In cases of BCG lymphadenitis, location, diameter size, progression of suppuration, and treatment method were investigated, as well. Results: The total number of study subjects was 3,342. Among these, the subjects suitable for enrollment criteria (total 3,222; Tokyo strain 2,501, Danish strain 721) were analyzed. BCG lymphadenitis regardless of its size developed in each five of subjects per strains, therefore, its incidence rate was 0.20% in Tokyo and 0.69% in Danish strain, respectively (P=0.086). However, when applying the WHO criteria - the development of lymph node swelling with diameter 1.5 cm or more, the incidence rate of BCG lymphadenitis was 0.16% (4 cases) in Tokyo and 0.42% (3 cases) in Danish strain, respectively. Conclusions: The incidence rate of lymphadenitis in two BCG types, percutaneous Tokyo and intradermal Danish strain BCG, is 0.20% and 0.69%, respectively. Both rates are acceptable.

• Progress in Medical Physics
• /
• v.19 no.3
• /
• pp.157-163
• /
• 2008

Retinal prosthesis is regarded as the most feasible method for the blind caused by retinal diseases such as retinitis pigmentosa or age-related macular degeneration. One of the prerequisites for the success of retinal prosthesis is the optimization of the electrical stimuli applied through the prosthesis. Since electrical characteristics of degenerate retina are expected to differ from those of normal retina, we investigated differences of the retinal waveforms in normal and degenerate retina to provide a guideline for the optimization of electrical stimulation for the upcoming prosthesis. After isolation of retina, retinal patch was attached with the ganglion cell side facing the surface of microelectrode arrays (MEA). $8{\times}8$ grid layout MEA (electrode diameter: $30{\mu}m$, electrode spacing: $200{\mu}m$, and impedance: 50 $k{\Omega}$ at 1 kHz) was used to record in-vitro retinal ganglion cell activity. In normal mice (C57BL/6J strain) of postnatal day 28, only short duration (<2 ms) retinal spikes were recorded. In rd/rd mice (C3H/HeJ strain), besides normal spikes, waveform with longer duration (~100 ms), the slow wave component was recorded. We attempted to understand the mechanism of this slow wave component in degenerate retina using various synaptic blockers. We suggest that stronger glutamatergic input from bipolar cell to the ganglion cell in rd/rd mouse than normal mouse contributes the most to this slow wave component. Out of many degenerative changes, we favor elimination of the inhibitory horizontal input to bipolar cells as a main contributor for a relatively stronger input from bipolar cell to ganglion cell in rd/rd mouse.

• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.10-14
• /
• 1978

There are relatively many reports have been issued on he active movement of cuticle of larva. which tend to protect their body, however, only a few reports have been disclosed on the cuticle of pupal body except the small portion of rectangle which shown tortoise-shell shape. In this connection, many portion of the external structure of pupal cuticle has been studied and the following. results were found: 1) No. spot of rectangle which is sculptured in the surface of cuticle that born by branching. out of the development of cell in imaginal bud of antenna and head were found. However, in the compound eye of net shaped sculpture was found in the (equation omitted) shaped parts which holding. the diameter of about 8u and the surrounding area has the small bump and the one is dark brown coloured comparing with shape. 2) The sculpture shape of thorax is a little different than in the head. However, (equation omitted) portion is varies from the segment to segment. In general, it is not very clear than the compound eye in the head, the dark brown bump shape is slowly fade a from the prothorax, mesothorax to metathorax. 3) The surface of intersegment membrane is colourless or slightly yellow, and the entire surface has stripped marking with thine lines. 4) In the abdominal segment, there are many and small sculptures in net shape around the (equation omitted) shape portions. 5) The size of sculpture in (equation omitted) portion of abdomen is smaller than one in thorax, and in the same segment, the dorsal is smaller than abdomen and the rear portion of the segment is larger than the front of segment. 6) After the 7th abdominal segment, no intersegmental membrane is found and the cuticle of the external structure is the same as external structure of the segment. 7) The seta is not found in head, compound eye, antenna and wing which portions were subdivided by development of imagined bud of the cell, no seta is found in cuticle of the segment in the general cell of the larva stage and also in the dorsal and intersegmental membrane.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.3-7
• /
• 2014

Purpose SPECT/CT scan to be performed attenuation correction on the basis of CT induce an overestimation of the site due to the beam hardening artifact by metal cover and reduce the images quality. Therefore, this study using a phantom that has been inserted artificial hip joint investigated that effect on the SPECT/CT image causing by metal artifact for varying the parameters of the Attenuation Map. Materials and Methods Siemens Symbia T16 SPECT/CT equipment was used. Artificial hip joint was inserted to SPECT/PET phantom, 17 mm sphere of Bright Streak area in CT image was filled with Tc-99m so that the radiation activity was 8 times compared to background. And then Hot and Background was measured in varying Wide Beam Coefficient on Attenuation Map and RBR (Region to Background Ratio) of Metal and Non-Metal was calculated and analyzed depending on the presence or absence of the hip joint. Results It tended to hot count of Non-Metal and Metal to increase as the value of the manual mode is increased, hot count ratio with the group of both manual mode 0.5 and 0.4 is the best match. Also, in automatic mode, the ratio of RBRNon-Metal and RBRMetal was 1.135, statistically significant difference was not observed in the manual mode 0.5 and 0.4. Conclusion In the automatic mode of Wide Beam Coefficient in attenuation correction map, it was found that it is over-correction by 13.52%, it was possible to minimize the over-correction by the artifact in 0.5 and 0.4 of manual mode. Further studies should be performed in order to apply to a patient with the help of this and it is considered possible to reduce the over-correction by the metal artifact of an artificial hip joint for Hip-Resurfacing Arthroplasty patients, and to improve the diagnostic performance.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.269-281
• /
• 2016

The statistical analyses of coefficient of variation, heritability, and genetic advance were carried out to identify differences in morphological characteristics, such as the stem and inflorescence length, of 10 major commercial cultivars of spray chrysanthemum (Chrysanthemum morifolium). For morphological characteristics, stem lengths ranged from 46.4 cm to 54.9 cm, the maximum diameter of stem was 5.6 to 8.5 mm, the hardness of the stem was 0.17 to $0.70kg{\cdot}m^{-2}$, the fresh weight of stem was 7.5 to 17.5 g, the dry weight of the stem was 1.6 to 3.3 g, the ratio of dry weight/fresh weight of stem was 15.9% to 23.1%. Also, the number of leaves on the stem was 8.4 to 12.2, the stem leaf area was 17.8 to $37.8m^2$, the fresh weight stem leaves was 5.3 to 18.6 g, the dry weight was 0.5 to 1.4 g and the ratio of dry weight /fresh weight of stem leaves was 7.6% to 11.5%. The inflorescence length ranged from 10.1 to 18.6 cm, the fresh weight of inflorescence was 7.3 to 26.7 g, the dry weight of inflorescence was 1.2 to 2.8 g, the ratio of dry weight /fresh weight of inflorescence was 10.4% to 17.1%. For flower, the diameter of the flower center was 8.2 to 13.3 mm, the petal width was 5.7 to 14.0 mm, the petal length was 12.9 to 33.1 mm, and the petal thickness was 157.8 to $354.4{\mu}m$. The mean values of each character in each cultivar were very different, and DMRT and LSD values based on morphological characteristics among 10 cultivars were highly significant. For variability and genetic parameters, the lowest CV (coefficient of variation), PCV (phenotypic coefficient of variation), and GCV (genotypic coefficient of variation) were 4.79% to 5.15% in stem length, and the highest variations were 62.97% to 65.21% in leaf area. ECV (error or environmental coefficient of variation) was the lowest for leaf area (1.71%) and it was the highest for leaf dry weight (19.30%). Heritability also significantly differed among the characteristics, ranging from 68.69% to 99.67%, the lowest value was shown in ratio of dry weight /fresh weight of stem and the highest value was for leaf area of stem. The value for genetic advance was the lowest in hardness of stem at 0.30 and the highest in leaf thickness at 156.65. The lowest genetic advance as percentage of mean of stem hardness was 9.17%, while the highest percentage of stem length was 134.27%. Thus the characters which had the highest values indicated above show the influence of additive gene action and may provide useful resources for selection programs for agronomic improvement.