• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.727-733
• /
• 2008

An authentication between a user's terminal and a Access Control Router (ACR) is preceded so that a user receives secure WiBro services. Otherwise they can be exposed from many attack risks. So the Telecommunications Technology Association (TTA) constituted a mechanism of the mutual authentication for WiBro service. In mechanism a user executes the mutual authentication between a Portable Equipment (PE) and the ACR by using Portable Internet Subscriber Identity Module (PISIM). But this standard needs many message to authenticate the ACR and the users cann't use wireless Internet service. Therefore in this paper we propose the key agreement protocol between the PSS and the ACR to authenticate the PSS to ACR. At this time Power Support Device (PSD) fer supporting the calculated quantity of the PSS is participated in the key agreement protocol. The ACR sends a generated key to Key Authentication Server (KAS) via secure IPsec tunnel and then it preserves the identity of the PSS and the value of key after it enciphered them. In conclusion we analyze the security and efficiency of the proposed protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.661-669
• /
• 2008

Nowadays, authentication is essential to identify the legal users in a network communication. Usually, there are few wars to achieve authentication over a publicly accessible network system in order to protect certain private data from the unauthorized users, ranging from simple ID/Password to Biometrics System. One of the most active areas in OTP(One Time Password) research today aims at exploiting OTP to provide authentication in the finance and security industry. OTP is usually discarded once it has been used. this prevents huge loophole of traditional authentication system which employs the same ID and Password every time. However this OTP system also has its weaknesses in surviving some attacks. this paper proposes an advanced OTP protocol using PingPong-128 without loop hole of pre-existing OTP.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.181-189
• /
• 2019

An aircraft power distribution device distributes and controls the power generated by the generator and provides overcurrent protection. There are many defect phenomena that make AC power distribution impossible during flight, which poses a problem in because some electronic equipment cannot be operated. We describe a process of deriving the root cause of defects by using vibration testing equipment to simulate the vibration conditions during aircraft flight, which result in defects. The results show that the cause of the defect is internal wiring damage caused by the vibration of the contactor of the AC power distribution device. Therefore, the shape of the contactor was improved to solve this problem. We also improved the test procedure by performing defect detection tests using vibration testing equipment to detect a faulty contactor. As a result of the improvements, a component certification test and flight test proved that the defect phenomena of the AC electrical master box were improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.211-217
• /
• 2019

In an complicated battlefield environment, information from enemy's camp is an important factor in carrying out military operations. For obtaining this information, the number of UAVs that can be deployed to the mission without our forces' loss and at low cost is increasing. Because the mission environment has anti-aircraft weapons, mission space is needed for UAV to guarantee survivability without being killed. The concept of Configuration Space is used to define the mission space considering with range of weapons and detect range of UAV. UAV must visit whole given area to obtain the information and perform Coverage Path Planning for this. Based on threats to UAV and importance of information that will be obtained, area that UAV should visit first is defined. Grid Map is generated and mapping threat information to each grid for UAV path planning. On this study, coverage conditions and path planning procedures are presented based on the threat information on Grid Map, and mission space is expanded to improve detection efficiency. Finally, simulations are performed, and results are presented using the suggested UAV path planning method in this study.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.659-662
• /
• 2021

국내에서는 매년 많은 수의 자격시험이 치러지고 있다. 현재 대부분의 시험장에서 응시자 본인 확인 절차는 감독관이 응시자의 얼굴과 신분증 사진을 비교하는 방식으로 이루어진다. 하지만 이 방식은 사람에 따라 오차가 클 수 있으며, 사진과 눈에 띄는 차이가 없으면 동일인물로 판단하기 쉽다. 최근까지도 대리응시 이슈가 발생하고 있어 근절을 위한 보다 강력한 조치가 필요하다. 본 논문에서는 지문과 오토인코더, SGAN을 이용하여 대리응시방지를 강화할 수 있는 본인 확인 시스템을 제안한다. 이때 응시자의 지문정보가 그대로 인증 서버에 저장되면 응시자의 생체정보가 노출될 수 있다는 문제점이 존재한다. 따라서 오토인코더를 통해 지문의 특징점만 추출하여 인증용 이미지를 생성하고 이 이미지를 서버에 저장하여 학습시키도록 한다. 적은 학습데이터 환경에서 분류기로써 좋은 성능을 갖는 SGAN을 통해 인증 이미지와 응시자가 동일인물인지 확인할 수 있다. 서버가 공격을 받더라도 응시자의 지문데이터가 그대로 노출되지 않게 되어 보안 취약점을 극복할 수 있다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.17-22
• /
• 2024

This paper introduces the implementation of a secondhand clothing trading system equipped with virtual fitting functionality based on deep learning. The proposed system provides users with the ability to visually try on secondhand clothing items online and assess their fit. To achieve this, it utilizes the Convolutional Neural Network (CNN) algorithm to create virtual representations of users considering their body shape and the design of the clothing. This enables buyers to pre-assess the fit of clothing items online before actually wearing them, thereby aiding in their purchase decisions. Additionally, sellers can present accurate clothing sizes and fits through the system, enhancing customer satisfaction. This paper delves into the CNN model's training process, system implementation, user feedback, and validates the effectiveness of the proposed system through experimental results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1614-1618
• /
• 2007

분포형 수문모형은 유역을 격자단위로 세분화하여 매개변수를 부여하고, 증발산, 침투, 지표면유출, 중간유출, 지하수유출, 하도흐름 등 여러 가지 수문요소를 해석하는 종합적인 수문모형이다. 지표면에 내린 강우의 증발 및 침투, 유출은 토양수분의 함량에 크게 의존하게 된다. 따라서 토양수분에 대한 적절한 모의가 분포형 수문모형의 정확도를 좌우하는 핵심이라 할 수 있다. 토양수분은 식물의 생장 및 가용수자원 산정 등에 있어서 중요한 요소로서 토양층 상부의 수 미터 내에 존재하는 수분의 양을 일컫는다. 토양수분의 공간적 시간적 특성들은 증발, 침투, 지하수 재충전, 토양침식, 식생분포 등을 지배하는 매우 중요한 요소라 할 수 있다. 강우로 인한 지면과 지표하에서의 순간적인 포화공간의 형성 및 유출의 생성을 포함하는 과정과 증발산 등은 모두 비포화대(vadose zone) 혹은 토양층에서의 토양수분의 함량에 크게 의존하게 된다(이가영 등, 2005) 본 연구에서는 토양수분에 대한 정밀측정 자료가 있는 설마천 유역 범륜사 사면에 대하여 분포형 수문모형의 토양수분 해석 능력을 평가하고자 하였다. 토양수분 모의에 사용된 격자기반의 분포형 수문모형은 미공병단에서 개발한 GSSHA(USACE, 2006) 모형이다. 모형의 입력자료는 정밀토양도와 현장측정에 의한 토양매개변수를 반영하여 구축하였고, 강우 및 기상자료는 2003년 1월 1일 ${\sim}$ 2004년 12월 31일의 1시간 자료를 이용하였다. 모의기간 중 2003년은 초기 토양수분값 등 초기조건의 영향을 줄이기 위한 웜업 (Warm-up)기간으로 설정하였고, 2004년의 모의결과를 토양수분 관측값과 비교하였다.업지역, 상업지역 등과 같이 지형적 특성에 따른 유량측정망을 구축하는 것이다.의 의사결정 지원 도구가 될 것이다. 따라서, 본 연구에서는 도시유역의 물순환 해석을 위한 일련의 과정, 즉 자료의 조사 및 취득에서부터 물순환 해석 모형을 이용한 정량적 현황파악, 물순환 개선 기법 및 평가를 수행함에 있어 주요 착안점 및 실무에서의 기술적 가이드를 제공하고자 하였으며, 보다 세밀한 도시유역의 물순환 해석을 위하여 우리나라와 일본에서 적용이 활발한 물리적 기반의 분포형 모형(WEP, SHER, SWMM)의 적용사례를 통하여 국내 도시하천의 물순환 해석에 활용함에 있어서의 실질적인 적용절차 등을 제시하고자 하였다. 한다.호강유역의 급격한 수질개선을 알 수 있다.世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다. 이러한 현상은 첫째, 15세기 중엽 경제적 태평과 함께 백자의 수요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.1
• /
• pp.127-143
• /
• 1996

Advanced countries are very active in deploying the National Information I infrastructure which provides universal service to promise fruitful quality of futuree life. Even in the distributed environment, we can closely converse, work together, and share information in a very convenient way. This is actually enabled with the help of groupware technology, which are currently focused and researched in a larger popularity. The aim of this study is to design a portable pack for group communications management to support the development of groupware application. In the paper we begin with technical survey, continue to build our own model for group communications man agement, and design its architecture and procedure. We also suggest group addressing mechanism under Internet environment such as how to create IP multicast address and IP port number dynamically and as a globally unique value for the communication session, with the help of the hierarchical and distributed address managers. We also indicate the reliable data transmission services to remedy the unreliable feature of the UDP multicast services, and finally the architecture/ applied to support the practical applications is briefly discussed for verification of the designed concept.

• The Journal of Information Systems
• /
• v.25 no.4
• /
• pp.105-119
• /
• 2016

Purpose The conventional solution methods for production scheduling problems typically focus on the active schedules, which result in short makespans. However, the active schedules are more difficult to generate than the semi active schedules. In other words, semi active schedule based search strategy may help to reduce the computational costs associated with production scheduling. In this context, this paper aims to compare the performances of active schedule based and semi active schedule based search methods for production scheduling problems. Design/methodology/approach Two decoding approaches, active schedule decoding and semi active schedule decoding, are introduced in this paper, and they are used to implement genetic algorithms for classical job shop scheduling problem. The permutation representation is adopted by the genetic algorithms, and the decoding approaches are used to obtain a feasible schedule from a sequence of given operations. Findings The semi active schedule based genetic algorithm requires slightly more iterations in order to find the optimal schedule, while its execution time is quite shorter than active schedule based genetic algorithm. Moreover, the operations of semi active schedule decoding is easy to understand and implement. Consequently, this paper concludes that semi active schedule based search methods also can be useful if effective search strategies are given.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.60-68
• /
• 2019

For effective building maintenance, the collection and management of various maintenance date such as work history information and material information is required. Despite the introduction of information management technologies and systems to reduce the amount of maintenance work of buildings, which have become larger and more complex, the maintenance information is not being utilized properly. As an alternative, research on the introduction and utilization of BIM is being conducted continuously. However, the BIM models generated at the design phase are not utilized in practice due to a lack of architectural maintenance information. This study proposed a COBie document prototype to support BIM-based smart maintenance tasks performed by building managers. In order to formalize various types of maintenance work procedures, a BIM-based maintenance process model is presented in two categories: inspection and maintenance. Among the BIM attribute data of the BIM model generated at the design phase, the parameters corresponding to the maintenance necessary information for each basic process are derived. Based on this, we proposed a COBie document prototype consisting of seven spreadsheets. The results of a case study confirmed that the KBIMS library-based BIM model created at the design phase without the maintenance information can be used at the maintenance phase.