• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.33.3-33.3
• /
• 2011

위성 사업의 핵심 지상 시스템인 Electrical Ground Support Equipment(EGSE)와 Mission Control System(MCS)는 사용시기와 목적, 개발조직이 달라서 지금까지는 별도로 개발 및 발전되어 왔고, 최근 국내에서는 다목적실용위성사업의 EGSE와 MCS에서 핵심 모듈만 서로 공유하는 형태로 개발되어 각각 성공적으로 위성 시험과 운영에 이용되고 있지만, 가까운 미래에는 하나의 통일된 공통지상시스템을 개발하여 위성 발사전 위성시험에서도 이용하고, 위성 발사후 위성 운영 단계에도 사용될 수 있도록 할 예정이다. 이러한 공통지상시스템에서는 위성 시험과 운영에 동시에 사용 가능한 공통절차서언어 개발이 핵심이다. 공통절차서언어를 이용하게 되면, AIT단계에서 위성운영단계로의 자연스러운 단계 전환이 가능하여 위성운영교육 및 준비에 필요한 비용 절감 뿐만이 아니라, AIT단계에서 시험/운영 절차서, 위성 데이터베이스의 사전 검증이 이루어지며, 아울러 위성 사업 일정 및 위성 개발 위험도 최소화 등의 이점이 있다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.566-573
• /
• 2021

In this study, safety management procedures were developed based on domestic and foreign guidelines and related maritime law to ensure the safe development and implementation of smart autonomous ship technology and Samsung Heavy Industry. The safety management procedure was developed according to the guidelines for (MASS) sea trials (MSC.1/Circ.1604, Annex: Interim guidelines for MASS trials), proposed by International Maritime Organization (IMO) for the relevant authorities and stakeholders of MASS to properly conduct tests of systems and infrastructure related to safety and environmental protection. The developed safety management procedure applies to the maritime demonstration test of a system applying autonomous navigation element technology mounted as a navigation aid on a ship operating under a watch system, while complying with the environmental protection and navigation safety of the coast of Korea.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.92-97
• /
• 2003

원전에서 운전절차서는 운전수행시 해당 운전원에게 요구되는 세부적인 작업내용이 명시되어 있다 특히, 비상운전절차서는 비상상황에서 운전원의 주관적 판단을 최대한 배제하고 안전해석에 의해 안전성이 검증된 작업만이 수행되도록 더욱 철저하게 안전성 중심으로 준비되어 있다. 이러한 운전절차서에 있어서 가장 중요한 요소는 발전소의 안전성을 유지할 수 있는 안전해석 결과를 정확히 준수하는 것이다.(중략)

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.234-236
• /
• 2012

해상교통안전진단제도(이하 제도)의 고도화를 위하여 제도 및 법적 체계의 개선을 실시하였다. 하지만, 사업자를 비롯한 관련기관들은 제도 체계에 대한 인식 부족으로 제도를 규제로 보는 인식이 늘어나게 되었다. 따라서 본 연구에서는 사업자를 비롯한 관련기관들의 제도에 대한 이해도를 높이고, 제도에 능동적인 참여를 유도하기 위하여 제도의 프로세스 분석을 실시하게 되었다. 프로세스 분석은 개정된 해상교통안전진단 시행지침 중 "제2장 안전진단 및 안전진단서", "제3장 안전진단서 제출 면제사업 및 의견서 작성"의 안전진단항목 결정절차, 안전진단서의 제출 및 사전검토 절차, 진단면제의견서 검토절차에 대하여 실시하였다. 이는 제도의 교육자료 및 가이드북의 내용으로서 활용할 예정이다.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.184-188
• /
• 2003

It is strongly recommended that periodic quality assurance should be carried out in the Gamma Knife that is used in radiosurgery since high radiation is delivered in one session. Since the protocols for Gamma Knife recommended by associations or agencies on quality assurance are absent in Korea, hospitals possessing the Gamma Knife have developed their own protocols. In order to develop a quality assurance protocol suitable for Korea, we reviewed the protocols of the Gamma Knife manufacturer, USA and Japan. we categorized the periodic items into three parts,: radiation dose, mechanical and safety part. The USA recommended and regulated more strict than the manufacturer. Japan recommended the items and frequency based on the USA. In conclusion, we tried to suggest a basic Gamma Knife quality assurance protocol suitable for Korea.

• The Safety technology
• /
• no.28
• /
• pp.24-27
• /
• 2000

• The Safety technology
• /
• no.21
• /
• pp.48-51
• /
• 1999

• Radiation Oncology Journal
• /
• v.24 no.3
• /
• pp.185-191
• /
• 2006

[ $\underline{Purpose}$ ]: Standardization quality assurance (QA) program of CyberKnife for suitable circumstances in Korea has not been established. In this research, we investigated the development of QA program for CyberKnife and evaluation of the feasibility under applications. $\underline{Materials\;and\;Methods}$: Considering the feature of constitution for systems and the therapeutic methodology of CyberKnife, the list of quality control (QC) was established and divided dependent on the each period of operations. And then all these developed QC lists were categorized into three groups such as basic QC, delivery specific QC, and patient specific QC based on the each purpose of QA. In order to verify the validity of the established QA program, this QC lists was applied to two CyberKnife centers. The acceptable tolerance was based on the undertaking inspection list from the CyberKnife manufacturer and the QC results during last three years of two CyberKnife centers in Korea. The acquired measurement results were evaluated for the analysis of the current QA status and the verification of the propriety for the developed QA program. $\underline{Results}$: The current QA status of two CyberKnife centers was evaluated from the accuracy of all measurements in relation with application of the established QA program. Each measurement result was verified having a good agreement within the acceptable tolerance limit of the developed QA program. $\underline{Conclusion}$: It is considered that the developed QA program in this research could be established the standardization of QC methods for CyberKnife and confirmed the accuracy and stability for the image-guided stereotactic radiotherapy.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.5
• /
• pp.149-158
• /
• 2008

Plant construction is being a motive power of national economic growth, because it is a higher value-added business which has enormous influence through other industry. But, plant projects management of the domestic company was poor. So, the development of EPC Business Process Management method has been encouraged. Therefore, this paper performed several researches for setting up the EPC Business Process Management Model for improving plant project management. And the details are as follows. First of all, this study collected the work procedure manuals of 12 large-sized international construction companies. Secondly, from the analyzing gathered EPC work procedure manuals, issues of work procedure manuals were analyzed and improvement plans were drawn out. Basis on this, This study presents a method to improve project management for EPC plant project. 'The Work Procedure Matrix for EPC Management' and 'Key Unit Works for EPC Management' were drawn out by using overseas construction management theories and international regulations. In addition, 'The EPC Business Process Management Models' reformed to the Business process method, that is the set of specifications, documents and procedures used to manage the EPC plant project. And it describes how the EPC work procedure manuals will be used. Finally, this study suggests the model of EPC Business Process Management System. The framework of Plant project management can be clarified by using 'The Work Procedure Matrix'. And 'Key Unit Works' are used to organize the work procedure needed to improve plant projects management. The results of this study will help to improve in project management efficiency for plant construction.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.170-178
• /
• 2009

In order to develope a common ground system, a general procedure language that can be used in both EGSE and MCS is primarily needed. As the first step in developing a common test and integration procedure language, KARI's ATS for AIT and MCE for GS were compared to some of the most representative languages such as PLUTO regarded European standard, STOL and ELISA and PIL. Based on the analysis, design features of developing a common test and integration procedure language were presented.