• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.401-407
• /
• 2018

The transmission bandwidth of shorted-monopole antenna in the frequency range of LF and MF was analyzed and the transmission mode considering the permissible data rate dependant on the transmission bandwidth was analyzed in this paper. Based on the required ERP, the output power of transmitter was deduced by considering the antenna efficiency. The analyses are for DGPS and time information transmission system in the frequency range of 283.5kHz and 65kHz respectively. The transmission antenna was modeled as TLM antenna that designed in the limited antenna site. The antenna equivalent circuit and antenna bandwidth were deduced based on the simulation analysis of antenna characteristics. The analyzed antenna bandwidth was compared with the simulated antenna bandwidth. Also the transmission mode for transmitter of LF and MF was proposed by considering the antenna bandwidth.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.397.1-397.1
• /
• 2014

최근 방사선 진단 영역에 이용되고 있는 증감지는 입사된 방사선의 감도를 증가시키기 위해 형광체를 사용하고 있으며, 외부의 에너지를 흡수하여 빛으로 방출하는 역할을 한다. 이는 방사선 검출기, 디스플레이, 의료기기 등 다양한 분야에 활용되고 있다. 필름에 X선을 노출 할 경우 형광체의 사용 유무에 따라 방사선 흡수 효율에 영향을 미치며, 이는 발광 효율 및 감도에 주요한 인자로 작용한다. 현재 상용화되어 있는 형광체는 낮은 발광 효율로 인한 한계를 가지므로, 발광 효율 향상을 위하여 제작 구조에 대한 연구가 진행되고 있다. 이 중 반사막을 활용하는 연구가 활발히 진행되고 있다. 일반적으로 형광체의 제조를 위하여 보편적으로 이용하고 있는 스크린프린팅 방법에서 건조 공정을 수행 시 균일도가 감소하는 현상이 발생한다. 이러한 현상은 반사막의 증착을 불균일하게 만드는 원인으로 작용하고 빛의 산란을 초래하는 현상을 초래한다. 이에 본 연구에서는 증착 시 투명도 저하에 따라 반사율이 증가되는 반사막 성질을 가지며, 방수성 및 절연성과 같은 보호층 특성을 지닌 유기성 투명 박막 페를린에 대하여 연구하고자 한다. 본 연구에서는 화학적 증기 증착법(Chemical Vapor Deposition, CVD)을 이용하여 투명 필름의 상단에 페를린을 코팅한 시편과 코팅하지 않은 시편으로 구분하여 제작하였고, 상단에 스크핀프린팅 방법을 활용하여 형광체를 도포 하였다. 시편 제작 후 실험은 시편을 필름 상단에 위치시키고, 일반진단에너지 대역(Model-SF 80)의 X선을 조사하였다. 이 후 현상기(model-pro14)를 통해 현상된 필름에 나타난 광학적 농도(Optical Density, O.D)를 농도계(Fluke Biomedical Nuclear Associates Densitometer)로 측정하였는데, 불확실성을 줄이기 위하여 총 5회를 측정하여 그 중 2번째로 높은 값을 도출하였다. 측정 결과, 페를린을 코팅한 형광체에서는 1.71의 O.D 값이 측정되었고, 페를린을 코팅하지 않은 형광체에서는 1.43의 O.D 값이 측정되었다. 이를 이용하여 투명도를 산출한 결과 상대적으로 약 1.76% 차이가 나타났다. 이러한 결과는 페를린 활용 시 환자의 피폭 선량 저감화 및 해상력 개선을 도모할 수 있을 것으로 사료된다.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.2
• /
• pp.74-82
• /
• 2010

As the basic knowledge during designing most moving mechanical structures, vibration engineering is a subject teaching the theory on vibration control and isolation, which also cultivating the ability of analyze variety of vibration problems. However, vibration engineering is more difficult to understand than other dynamics courses in mechanical field, so the development of educational equipments in order to help understanding physical theory of vibration is really necessary. So in this paper we could see the effect after doing simple experiment process using the educational vibration equipment with multiple function, students could easily understand physical theory of vibration. The educational vibration equipment with multiple function and its application range are introduced, which could performance four kinds of typical vibration phenomenon: vibration of multidegree of freedom system, vibration of beam, vibration of beam, and vibration of plate. Finally, assessments of response and improvement plan are proposed through a survey.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.119-125
• /
• 2004

This paper is described the indirect induction heated boiler system and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter which can operate in the frequency range from 20〔KHz〕 to 50〔KHz〕. A specially designed Induction heater, which is composed of laminated stainless assembly with many tiny holes and interconnected spot welding points between stainless plates, is inserted into the ceramic type vessel with external working coil. This working coil is connected to the resonant inverter. In the induction heater, it's primary heating section creates low-pressure saturated steam and secondary heating section generates heat distribution evaporating fluid from the turbulence fluid which is flowing through the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from the practical point of view.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.378-385
• /
• 2016

The internal circuit of the bus-bar for an electrical switch board is a prime cause of electric shock and short circuit accidents due to the exposure of live parts. Electrical fires can also be caused by animals and foreign substances in the switchboard that connect the components with a difficult structure resulting in overheating due to an increase in contact resistance. Preventing these types of accidents is a prime concern in the manufacturing process, such as cutting and bending. In this study, the cutting bus bar of a switch board contained improved modules as a flame retardant that isolates a separate blocks to prevent such problems. This was implemented as a scalable and flexible means of reducing electrical switchboard hazards to offer a safe switch board bus-bar structure of a new connecter type

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.329-332
• /
• 2012

LEDs are using widely in a field of illumination, LCD LED backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. To achieve high performance LEDs, one needs to enhance output power, reduce operation voltage, and improve device reliability. In this paper, we have proposed that the optimum design and specialized process could improve the performance of LED chip. It was showed an output power of 7cd and input supplied voltage of 3.2V by the insertion technique of current blocking layer. In this paper, GaN-based LED chip which is built on the sapphire epi-wafer by selective MOCVD were designed and developed. After that, their performances were measured. It showed the output power of 7cd more than conventional GaN-based chip. It will be used the lighting source of a medical equipment and LCD LED TV with GaN-based LED chip.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.268-275
• /
• 2020

In domestic mountain resort areas, a catenary system cannot be installed for the protection of the natural environment and view. Therefore, mountain trams must be operated wireless. In this study, a local ground pantograph, which supplies electricity to the battery on board, was developed for this purpose, and its performance was verified by tests. The system is installed on ground at stops or repair shops. While a bogie goes to the pantograph, the arms and collection shoes are raised by a spring force to make contact with the collection bar under the bogie so electric power can be supplied to the battery. Because it is a local ground type, it does not require a roof pantograph and catenary system. The system enables the mountain tram to run wireless. In addition, there is no separation and arc because it collects current while standing at stops or shops. The system has a long life because moving contact, which generates wear and damage to shoes, is avoided. The insulation resistance was above the criteria of 10 ㏁, and there was no abnormal temperature increase when a current of 335A was supplied for one hour.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.169-169
• /
• 2011

STT-MRAM (수직자화 자기메모리)는 자화반전 현상을 원리로 구동하는 비휘발성 메모리로 기존의 메모리 장치에 비해 빠른 접근 속도와 높은 저장 밀도를 가지며 영구적인 기록이 가능하다. 이러한 장점들에 더해 적은 소모 전력을 지니므로 기존의 SRAM등의 한계를 극복할 대안으로 각광받고 있으며 차세대 메모리 군의 선두주자로 가장 적합한 후보중 하나이다. STT-MRAM의 건식 식각 방식에 있어 가장 큰 이슈는 소자 구동에 핵심적인 역할을 하는 MTJ(Magnetic Tunnel Junction)의 식각이다. MTJ는 free layer, tunnel barrier, pinned layer 3개의 층으로 구성되어 있으며 양 끝 layer에는 강자성체인 CoFeB가 사용되고 tunnel barrier에는 절연층인 MgO가 사용되고 있다. 이러한 물질들은 기존의 반도체 소자에서는 사용되지 않았던 물질들로 기존 공정에서 사용되던 Cl2 based plasma etching에서는 측벽에 비화발성 반응물과 잔류 Cl2에 의해 부식이 발생하는 문제점이 드러나고 있다. 이러한 문제점을 해결하기 위한 새로운 대안으로 CO/NH3/Ar나 CH4/Ar 같은 새로운 가스 조합을 사용하는 연구가 진행되고 있다. 이러한 연구에 의해 기존의 Cl2 plasma를 이용한 식각에서 나타나는 문제점은 해결이 되었으나 또 다른 문제점들이 보고되고 있다. 본 연구에서는 stack MRAM sample을 사용하여 기존의 사용되는 Cl2/Ar plasma와 대안 gas인 CO/NH3, CH4/Ar plasma에서의 식각을 진행하였으며 실험 조건(gas 비율 변화, Bias power 변화, 식각 시간)에 따른 식각 속도의 변화나 식각 후의 profile에 대하여 관찰하였다. 이에 따라 식각후에 어떠한 차이점이 있는 지를 알아보았으며 CO/NH3나 CH4/Ar plasma에서 식각시 나타나는 문제점에 대하여도 조명해 보았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.474-479
• /
• 2016

As the Eco-energy is recently required, electrical energy is fast increased. Several induction heating methods are attractive for Eco-energy and energy saving. In this paper, electrical fan heater was designed and developed with new concept for energy saving by electromagnetic induction heating. Proposed system was composed of three module, blast part, induction heating part and power transformation part. Induction heating method was adapted for heating and the resonant inverter was used for increasing of the power transformation efficiency. Full-bridge resonant inverter was adopted to resonant inverter. This system was composed of induction heating part made with metal(SUS 40 series), and power transformation part made with rectifier module, filter module and resonant inverter. From these results, the proposed new electric heater could be saved the energy from faster increasing the temperature compared to commercial gas and other electric heater. This electrical fan heater is possible to be used in field of home, commercial and agricultural area for eco-energy saving heater.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5213-5218
• /
• 2014

Organic memory devices were made using the plasma polymerization method. The memory device consisted of ppMMA(plasma polymerization MMA) thin films as the tunneling and insulating layer, and a Au thin film as the memory layer, which was deposited by thermal evaporation. The organic memory operation theory was developed according to the charging and discharging characteristics of floating gate type memory, which would be measured by the hysteresis voltage and memory voltage with the gate voltage values. The I-V characteristics of the fabricated memory device showed a hysteresis voltage of 26 [V] at 60 ~ -60 [V] double sweep measuring conditions. The programming voltage was applied to the gate electrode in accordance with the result of this theory. A programming voltage of 60[V] equated to a memory voltage of 13[V], and 80[V] equated to a memory voltage of 18[V]. The memory voltage of approximately 40 [%]increased with increasing programming voltage. The charge memory layer charging or discharging according to the theory of the memory was verified experimentally.