• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.87-95
• /
• 2000

By using AIP(Arc Ion Plating) of a physical vapor deposition for the first time in Korea a ceramic tool whose surface is coated single layeredly with TiN is developed. In addition cutting resistance appearing in the process of finishing cut of hardened carbon tool steel STC3 is studied. The principal and radial components of cutting resistance in those cutting conditions appear to be the same or similar and the feed component is relatively small. The feed component is found to be in proportion to cutting width and the radial component in proportion to cutting thickness. Owing to coating the cutting resistance of a TiN coated ceramic tool increas-es compared with that of a general ceramic tool.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.63-68
• /
• 1996

In this study, the effect of tool rake angles and the change of cutting conditions on specific cutting pressure in face milling is investigated. The cutting force in face milling is predicted from the double cutting edge model in 3-dimensional cutting. Conventional specific cutting pressure model is modified by considering the variation of tool rake angles. Effectiveness of the modified cutting force model is verified by the experiments using special face milling cutters with different cutter pockets and various rake angles. From the comparison of the pressented model and the specific cutting pressure, it is shown that the axial force can be predicted by the tangential and redial forces without the knowledge of friction angle and shear angle. Also, the relation between specific cutting pressure and cutting cindition including feedrate, cutting velocity and depth of cut is studied.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.3
• /
• pp.58-65
• /
• 1996

This thesis is concerned with the study on the characteristics of the cutting resistance occurring in finish machining of hardened steels such as carbon tool steel and alloy tool steel by a ceramic tool with nose radius. For the purpose, the shape of cutting cross-section made at nose part of the tool was analyzed geometrically and the wear mechanism on the flank face of the ceramic tool is investigated. In order to investigate the characteristics of cutting resistance two categories of cutting conditions are suggested, along with geometrical analysis. One category includes the conventional cutting parameters such as feed and depth of cut, another containing new cutting parameters of thickness of cut and width of cut etc. Thickness of cut width of cut and area of undeformed chip section formed by the condition of engagement between workpiece and cutting tool are determined as the function of feed, depth of cut and nose radius of cutting too, And an effective approach angle is determined by depth of cut and nose radius.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.4
• /
• pp.61-70
• /
• 1989

A new analytical method is proposed to monitor the chip form of cutting forces applying the techinque of signal process. Cutting experiments are carried out under various cutting conditons and cutting forces are measured in-processing through Tool Dynamometer. In this report, auto-correlation functions, frequency characteristics of dynamic force, high frequency distribution and Peak/RMS values are calculated from the measured cutting forces, and the concept of method is also discussed. The experimental results show that six types of the form of chips are possible to classify from the signal of cutting forces not related to cutting conditions.

• Tribology and Lubricants
• /
• v.6 no.1
• /
• pp.82-88
• /
• 1990

In order to investigate tribological effects of coatings on different places on tool wear, commercial quality coated inserts were tested in production speed machining after the coatings on clearance or rake face of coated tools were selectively removed. The experimental results demonstrated that the primary role of coatings in tool wear was the reduction of the thermochemical adhesion between the tool material and workpiece. And the coating on rake face was observed to retard the progress of flank wear. In case of machining carbon steel, multicoated tools showed the most favorable results for considering the notch wear.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.126-130
• /
• 1993

소경드릴가공은 많은 기계가가공중에서도 가장 곤란한 가공의 하나이다.그것은 가공구멍단면 이하의 공간속에서 공구강성이나 칩처리들이 고려되어야 한다는 엄격한 제한이 소경이란 형태에서 한층 어려워지기 때문이다.소경의 구멍가공은 최근 전자제품,우주항공기 부품,소형정밀부품, 섬유산업의 광섬유관련품 등에 까지 수요가 증가함에 따라 레이져가공,전자빔가공,전해가공과 같은 전기물리적가공법이 많이 사용되고 있지만 생산성 및 가공정밀도의 관점에서 만족스러운 결과를 얻을 수 없는 실정이다, 이에반해 기계가공인 소경드릴가공은 공구강성저하로 인해 쉽게 파손된다는 점은 있지만 가공정도가 양호하고 종횡비가 높은 가공이 가능하여 실용화가 가장 좋은 분야라고 할수 있다. 이로 인해 최근에는 여기에 관한 많은 연구가 지행되고 있다. 또한 기계가공의 자동화가 진전됨에 따라서 단일공국의 대표적 공구인 바이트의 결함을 검출하는것 못지않게 드릴의 마멸이나 절손의 검출 또는 예측이 중요한 문제로 부각됨에 따라 절삭저항의 이용이 증가할 것으로 생각된다. 따라서 본 연구에서는 ADI에 포함된 Si량이 드릴가공시 ADI의 피삭성에 미치는 영향을 절삭조건을 변화시켜 고찰함과 동시에 공구수명에 대하여 고찰하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.10
• /
• pp.37-45
• /
• 2007

End-milling is intermittent cutting process performed by a tool with a number of teeth. Its cutting forces are commonly measured by the tool dynamometer which has rectangular coordinates. In this case, the pattern of cutting forces is different according to cutting conditions. At a certain cutting condition, the sign of cutting force changes from positive to negative during a revolution of one tooth. The change of force direction excites a cutting tool and severe vibration arises when radial depth of cut increases. In this study, cutting experiments and simulations were carried out in order to explain the cause of the change of the cutting force direction. In addition, the effect of the cutting force change was discussed in terms of chatter vibration in end milling.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.150-155
• /
• 1994

종래의 초내열합금은 원자력산업과 우주항공산업등에 주로 사용되었으며, 산업이 고도화되어짐에 따라 각종 산업기계와 자동차 분야에까지 광범위하게 사용되어지고 있다. 대표적인 초내열합금으로서의 인코넬(Inconel)은 인성과 Creep 특성이 우수하고, 특히 고온강도가 높고 화학적으로도 안정하여 부식에도 강한 장점을 지니고 있어 항공기 부품재료로서 최근 각광을 받고 있다. 본 연구에서는 일반적으로 사용되어지고 공구재종인 코팅초경합금공구와 세라믹 공구를 사용하여 초내열합금인 인코넬 600을 절삭가공하여, 절삭저항,공구의 파손 및 마모,칩의 용착현상등의 가공성에 영향을 주는 요인에 대하여 검토함으로써, 공구의 종류에 대ㄷ응하는 적절한 절삭영역을 설정하는 것을 목적으로 하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.108-116
• /
• 2014

Considering the run-out effect and cutting force coefficients, the cutting force profile of half immersion end-milling was analyzed in detail. The effects of three specific cutting-force coefficients and three edge-force coefficients are verified. Through a detailed investigation, it is proved that the radial cutting force coefficients and are the major factors which increase the cutting forces Fx and Fy in end-milling. However, the axial cutting force coefficients have no influence on the force Fx and Fy changes in end-milling. Also, the analyzed end-milling force model shows good consistency with the actual measured force with regard to Fx and Fy. Thus, this model can be used for the prediction of the force history in end-milling with run-out, and it incurs a different force history with different start and exit immersion angles as well as holding effects.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.85-91
• /
• 2013

The machinability of wear-resistible tungsten carbides and the tool wear behavior in machining of V30 and V50 tungsten carbides using PCD (Poly Crystalline Diamond) cutting tool was investigated to understand machining characteristics. This material is one of the difficult-to-cut materials in present, but their usage has been already broadened to every commercial applications such as mining tools, and impact resistant tools etc. Summary of the results are as follows. (1) Tool wear progression of PCD tools in turning of wear-resistible tungsten carbides were observed specially fast in primary cutting distance within 10m. (2) Three components of cutting resistance in this research were different in balance from the ordinary cutting such as that cutting of steel or cast iron. Those were expressed large value by order of thrust force, principal force, feed force. (3) If presume from viewpoint of high efficient cutting within this research, a proper cutting speed was 15m/min and a proper feed rate was 0.1mm/rev. In this case, it was found that the tool life of PCD tool was cutting distance until 230m approximately. (4) In cutting of wear-resistible tungsten carbides such as V30 and V50, it was recognized that the tool wear rate of V30 was very fast as compared with V50. (5) When the depth of cut was 0.1mm, there was no influence of the feed rate on the feed force. And the feed force tended to decrease as the cutting distance was long, because the tool was worn and the tool edge retreated. (6) It was observed that the tungsten carbides were adhered to the flank.