• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.76-84
• /
• 1999

This paper presents an integrated method for aircraft position estimation using sequential aerial images. The proposed integrated system for position estimation is composed of two parts: relative position estimation and absolute position estimation. Relative position estimation recursively computes the current position of an aircraft by accumulating relative displacement estimates extracted from two successive aerial images. Simple accumulation of parameter values decreases reliability of the extracted parameter estimates as an aircraft goes on navigating, resulting in large position error. Therefore absolute position estimation is required to compensate for the position error generated in relative position estimation. Absolute position estimation algorithms by image matching or digital elevation model (DEM) matching are presented. In image matching, a robust oriented Hausdorff measure (ROHM) is employed whereas in DEM matching an algorithm using multiple image pairs is used. Computer simulation with four real aerial image sequences shows the effectiveness of the proposed integrated position estimation algorithm.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.453-463
• /
• 2001

This paper presents an absolute position estimation method using Indian remote sensing (IRS) satellite images, which is a part of a position estimation (PE) system. The accumulated buffer (AB) matching method is proposed, in which a set of accumulator cells is employed for fast edge-based matching. By computer simulations with two sets of veal aerial image sequences, the performance of the AB matching method is analyzed and its effectiveness is shown in terms of the position error in the hybrid PE system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.2
• /
• pp.101-113
• /
• 2006

Arching effect occurs around the unsupported excavation surface near to tunnel face when a tunnel is excavated in a stable rock mass. If a weak fracture zone exists in front of tunnel face, a displacement occurs between tunnel face and weak fracture zone due to stress concentration. If three-dimensional absolute coordinates (longitudinal, transverse, vertical direction) is measured at tunnel face by geodetic method, the ground change in front of the tunnel face can be predicted by analysing three-dimensional absolute displacement. The purpose of this study is to verify the analysis method of three-dimensional absolute displacement by comparing the trend of displacement ratio at crown and sidewall of tunnel and the influence line/trend line of crown settlement compared with TSP results in the same section.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.775-781
• /
• 2011

For the measurement of absolute position of mobile robot in indoor environments, the ultrasonic positioning systems using ultrasound have been researched for several years. Most of these ultrasonic positioning systems to avoid interference between the ultrasound are used for sequential transmitting. However, due to the use of sequential transmitting, the positions of transmitter to receive an ultrasound will change when the mobile robot moves. Therefore the accuracy of positioning is reduced. In this paper, the new position estimation algorithm with weighting factor according to the time of receipt is proposed. By applying the proposed algorithm to existing Ultrasonic Satellite System(USAT), the improved USAT is configured. The positioning performance of the improved USAT with the proposed position estimation algorithm are verified by experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.544-547
• /
• 1997

In this paper, we propose a dynamic localization method using a rotating sonar and a map. The proposed method is implemented by using extended Kalman filter. The state equation is based on the encoder propagation model and the encoder error model, and the measurement equation is a map-based measurement equation using a rotating sonar sensor. By utilizing sonar beam characteristics, map-based measurements are updated while AMR is moving continuously. By modeling and estimating systematic errors of a differential encoder, the position is successfully estimated even the interval of the map-based measurement. Monte-Carlo simulation shows that the proposed global position estimator has the performance of a few millimeter order in position error and of a few tenth degrees in heading error and of compensating systematic errors of the differential encoder well.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.489-492
• /
• 2000

본 논문에서는 영상 항법 변수 추출 알고리듬의 실시간 구현에 관해 연구하였다. 영상 항법 변수 추출 알고리듬은 이전 위치를 기준으로 현재 위치를 추정해내는 상대위치 추정 알고리듬과 상대위치 추정에 의해 누적되는 오차를 보정하기 위한 절대위치 보정 알고리듬으로 구성된다. 절대위치 보정 알고리듬은 고해상도 영상과 IRS (Indian Remote Sensing) 위성영상을 기준영상으로 이용하는 방법 및 DEM (Digital Elevation Model) 을 이용하는 방법으로 구성된다. 하이브리드 영상 항법 변수 추출 알고리듬을 실시간으로 구현하기 위해 MVP (Multimedia Video Processor)로 명명된 TMS320C80 DSP (Digital Signal Processor) 칩을 사용하였다. 구현된 시스템은 MVP의 부동 소수점 프로세서인 MP (Master Processor) 를 고정 소수점 프로세서인 PP (Parallel Processor) 를 제어하거나 삼각함수 계산과 같은 부동 소수점 함수를 계산하는데 사용하였고, 대부분의 연산은 PP를 사용하여 수행하였다. 처리시간이 많이 필요한 모듈에 대해서는 고속 알고리듬을 개발하였고, 4개의 PP를 효율적으로 사용하기 위한 영상분할 방법에 대해 제안하였다. 비행체에서 캡코더를 이용해 촬영한 연속 항공 영상과 비행체의 자세정보를 입력으로 실시간 시뮬레이션 하였다. 실험결과는 하이브리드 항법 변수 추출 알고리듬의 실시간 구현이 효과적으로 구현되었음을 나타내고 있다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.37-44
• /
• 2021

This study is implemented as a sensor-less position controller capable of multi-turn detection to replace the expensive absolute encoder used in the turret servo system. For sensor-less control, the position information of the rotor is essential. For this, a magnetic flux estimator was implemented from the mathematical model of IPMSM used in the turret servo system. The position of the rotor and the angular velocity of the rotor were obtained using the rotor magnetic flux calculated from the magnetic flux estimator. Using the zero-crossing technique, one pulse was generated for each rotation of the estimated rotor magnetic flux to measure the number of multi-turns. Simulation and experiment results confirmed the usefulness of the proposed method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.589-592
• /
• 2010

무선 센서 네트워크에 대한 연구에서 센서 노드 로부터 발생한 데이터는 데이터 그 자체의 의미도 중요하지만, 데이터의 발생 위치 역시 매우 중요하다고 할 수 있다. 기존 연구로 센서 노드의 위치를 추정할 수 많은 방법들이 있지만, GPS 를 이용하거나 절대적인 위치를 알고 있는 앵커 노드 등을 이용하는 방법들은 추가적인 하드웨어 및 여러 번의 통신이 필요하게 되고 그에 따라 에너지 소비의 증가와 앵커 노드의 손실에 의한 오차의 확대 등 많은 문제를 갖고 있다. 본 논문에서는 센서 노드를 하드웨어적으로 단순화 할 수 있는 거리에 기반하지 않은(range-free) 방식을 사용하여 무선 센서 네트워크에서 싱크 노드로부터 센서 노드의 상대적인 위치를 추정하고 추정 데이터를 기반으로 싱크 노드에서 보정하는 방법으로 자원의 제약에서 비교적 자유로운 싱크 노드의 역할을 증대시킨 위치 추정 및 보정방법에 대해 설명한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.459-461
• /
• 2019

The location estimation algorithm in the existing wireless network uses a base station to estimate the absolute location of three or more in the state where the terminal is fixed. However, this paper suggests a location recognition algorithm that uses a mobile terminal to estimate the location of a mobile base station using a traverse technique using a three-way estimation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.444-450
• /
• 2015

The accuracy of small and low cost CCD camera is insufficient to provide data for precisely tracking unmanned aerial vehicles(UAVs). This study shows how UAV can hover on a human targeted tracking object by using CCD camera rather than imprecise GPS data. To realize this, UAVs need to recognize their attitude and position in known environment as well as unknown environment. Moreover, it is necessary for their localization to occur naturally. It is desirable for an UAV to estimate of his attitude by environment recognition for UAV hovering, as one of the best important problems. In this paper, we describe a method for the attitude of an UAV using image information of a maker on the floor. This method combines the observed position from GPS sensors and the estimated attitude from the images captured by a fixed camera to estimate an UAV. Using the a priori known path of an UAV in the world coordinates and a perspective camera model, we derive the geometric constraint equations which represent the relation between image frame coordinates for a marker on the floor and the estimated UAV's attitude. Since the equations are based on the estimated position, the measurement error may exist all the time. The proposed method utilizes the error between the observed and estimated image coordinates to localize the UAV. The Kalman filter scheme is applied for this method. its performance is verified by the image processing results and the experiment.