• Korean Journal of Plant Tissue Culture
• /
• v.22 no.2
• /
• pp.95-99
• /
• 1995

We have previously established a system for plant regeneration through somatic embryogenesis and Agrobacterium-mediated transformation of Korean ginseng. In this study to produce a fungus-resistant plant, we introduced a bean chitinase gene into ginseng using the transformation system. A binary vector pChi/748 was constructed by introducing the bean basic chitinase gene into EcoRI site of pGA748 which carries the CaMV 35S promoter governing the introduced gene and neomycin phosphotransferase II(NPT-II)gene as a positive selection marker. Cotyledonary explants were cocultured with A. tumefaciens strain LBA4404 harboring the binary vertor pChi/748 for 48 h, and transferred to MS medium supplemented with l mg/L2,4-D,0.1mg/L kinetin, 100 mg/L kanamycin, and 500mg/L carbenicillin. Kanamycin-resistant calli were formed on the cut surface of cotyledonary explants after one month of culture, and subsequently they gave rise to somatic embryos. Upon transfer onto medium containing 1 mg/L each of BA and GA$_3$, most of them converted to plantlets after 5 weeks of culture. The genomic DNA of eight kanamycin-resistant regenerants was subjected to polymerase chain reaction (PCR) using two specific 21-mer oligonucleotides derived from the chitinase gene. PCR-Southern blot analysis confirmed that the chitinase gene was incorporated into six out of the eight regenerants..

• Journal of Plant Biotechnology
• /
• v.43 no.2
• /
• pp.157-163
• /
• 2016

This study was conducted to investigate the potential use of New Zealand spinach (Tetragonia tetragonioides) as a new vegetable crop which will be cultivated in salt-affected soils such as reclaimed areas. New Zealand spinach ecotypes native to Korea were collected across the Southern, Western and Eastern seashore regions of the Korean peninsula, among which fifty-five accessions were later further propagated and evaluated genetically by using an AFLP (amplified fragment length polymorphism) marker. Based on the AFLP analysis performed to uncover the genetic diversity of the collected ecotypes, enzymatic cleavage of the extracted DNA was implemented based on 12 EcoRI and MseI combinations. A total of 1,279 alleles (107 alleles per EcoRI and MseI enzyme combination) were successfully amplified, among which 62 alleles per enzyme combination were polymorphic (58%). The AFLP analysis indicated that the rate of genetic dissimilarity was 29% among the New Zealand spinach collections, which were clustered into the 7 genetic diversity group. This is the first report on the genetic variation in the genus Tetragonia, and the basic information can be applied to select parental lines for enhancing the segregation spectrum of the new halophytic vegetable plant grown in salt-affected areas.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.189-195
• /
• 2003

The objective of this study is to improve the optical sensitivity of laser fluorescence for detection of incipient enamel caries. An incipient carious lesion was formed in various stages by placing an enamel specimen of a bovine tooth in STPP demineralization solution. After measuring the optical density of the lesion surface by laser fluorescence induced by argon laser and various alter of yellow(500-520nm), amber(520-540nm), orange(540-560nm), and red(560-580nm), the specimen was cut vertically to measure the depth of the lesion using a polarizing microscope. SAS statistical program was used to analyze the relationship between the optical density of the lesion suface and the depth of the lesion. The results were as follows: 1. The optical density of early carious lesion, measured by laser fluorescence with amber and orange filter, and lesion depth observed by polarizing microscope, were increased as demineralization time increased. 2. The correlation coefficient between optical density of the lesion surface and the histological depth of the lesion was the highest in orange filter(r=0.49), followed by amber(r=0.32), yellow(r=0.13) and red(0.01). 3. Regression analysis showed that the most linear relationship between the optical density and the lesion depth was existed in orange filter group. In regard above results, laser fluorescence could be considered to be reliable for optical diagnosis of dental caries.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.11
• /
• pp.979-986
• /
• 2016

The tripod shafts of constant-velocity joint are used in both the trains KTX and KTX-sanchon. It is an important component that connects the motor reduction unit and the axle reduction unit in a power bogie. The tripod shaft not only transmits drive and brake torque in the rotational direction, but also slides in the axial direction. If the drive system is loaded with an excessive torque, the fuse part of the shaft will be fractured firstly to protect the other important components. In this study, a rig was developed for conducting torsion tests on the tripod shaft, which is a type of mechanical fuse. The tripod shafts were subjected to torsional fracture test and torsional fatigue test on the rig. The weak zone of the tripod shaft was identified, and its fatigue life was predicted using finite element analysis (FEA). After analyzing the FEA results, design solutions were proposed to improve the strength and fatigue life of the tripod shaft. Furthermore, the deterioration trend and time for failure of the tripod shaft were verified using the hysteresis loops which had been changed with the advancement of the torsional fatigue test.

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.257-266
• /
• 2010

The purpose of this study was to determine the effect of post types and sizes on fracture resistance in immature tooth model with various restorative techniques. Bovine incisors were sectioned 8 mm above and 12 mm below the cementoenamel junction to simulate immature tooth model. To compare various post-and-core restorations, canals were restored with gutta-percha and resin core, or reinforced dentin wall with dual-cured resin composite, followed by placement of D.T. LIGHT-POST, ParaPost XT, and various sizes of EverStick Post individually. All of specimens were stored in the distilled water for 72 hours and underwent 6,000 thermal cycles. After simulation of periodontal ligament structure with polyether impression material, compressive load was applied at 45 degrees to the long axis of the specimen until fracture was occurred. Experimental groups reinforced with post and composite resin were shown significantly higher fracture strength than gutta-percha group without post placement (p < 0.05). Most specimens fractured limited to cervical third of roots. Post types did not influence on fracture resistance and fracture level significantly when cement space was filled with dual-cured resin composite. In addition, no statistically significant differences were seen between customized and standardized glass fiber posts, which cement spaces were filled with resin cement or composite resin individually. Therefore, root reinforcement procedures as above in immature teeth improved fracture resistance regardless of post types and sizes.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.62-62
• /
• 2009

석탄화력발전소의 CO2배출량 감소와 고효율, 대용량화로 인해 초초임계압(USC:Ultra Super Critical) 화력발전소의 건설이 증가하고 있다. USC 발전소는 효율향상을 위한 증기온도와 압력의 상승 때문에 보일러 고온고압부에 기존의 소재에 비해 고온강도와 내산화성의 재료물성이 향상된 신소재 적용이 불가피하다. 특히 사용된 신소재 중에서 보일러 본체를 구성하는 수냉벽관(Water wall), 과열기와, 재열기용 튜브 및 후육부인 헤더와 배관재로 기존의 2.25Cr-1Mo강을 개량한 2.25Cr-1.6W계 내열강이 적용되고 있다. 2.25Cr-1.6W강은 SMI와 MHI가 공동개발한 소재로 1995년 튜브제품이, 1999년에 단조, 파이프재, 플레이트제품이 ASME code case로 등재되었고, 2009년 ASME code case 2199-4로 개정되어 사용 중이다. 이 소재는 2.25Cr-1Mo강에 고온강도 개선을 위해 석출강화효과가 있는 V과 Nb을 첨가하였고, 탄화물의 열적안정성과 고용강화효과 증대를 위해 W을 첨가하였다. 그리고 제작성과 용접성 및 재료의 인성 향상을 위해 B첨가와 C함량을 낮추었다. 합금성분의 첨가와 조정에 의해 고온강도는 개선되었지만, 보일러 설치 및 보수를 위한 용접과정에서 용접금속과 CGHAZ(Coarse Grain HAZ)에서 용접균열이 발생하였다. 대부분의 용접균열은 용접결함이나 고온 혹은 저온균열이 아닌 2.25Cr-1.6W계강의 강도 개선을 위해 첨가한 V과 Nb이 용접후열처리 도중 입내에 MX형태의 미세석출로 입내를 강화시킴으로서 발생한 재열균열 민감성 증대에 기인된 것으로 판단된다. 이에 본 연구에서 용접 및 후열처리 과정에서 용접금속과 HAZ에서 발생하는 용접금속의 응력분포를 전산해석을 통해 확인하고 실제 후육파이프 용접부에서 잔류응력을 측정해 비교하였다. 용접부 응력분포는 SYSWELD 프로그램을 사용해 해석을 수행하였고, 발전소 실배관재의 용접부 응력측정은 수평부 측정이 용이하도록 지그를 부착한 Potable 잔류응력측정기를 사용해 Hole Drilling Method(HDM)를 적용하여 잔류응력을 측정하였다. 해석 결과 CGHAZ부위의 잔류응력이 용접금속과 기타 부위에 비해 높은 응력분포를 나타냈으며, 이는 CGHAZ와 용접용융선 부근에서 균열이 발생하는 실제값과 일치하는 결과를 보였다. 실제 배관재 용접부에서 측정한 잔류응력값은 항복응력의 약 50% 이하 응력값을 나타냈다. 배관 구조에 기인한 시스템응력의 영향을 제거하기 위해 배관재 용접부를 중심으로 양끝단을 절단 후 용접부에서 측정한 응력은 항복응력 대비 25%수준의 낮은값을 보였다. 그러나 배관재가 장기간 고온환경에 노출되었고 용접금속 내부의 균열이 발생한 상태에서 측정하였기 때문에 용접잔류응력은 상당부분 해소되어 상대적으로 낮은 응력값이 얻어진 것으로 판단된다.

• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.726-731
• /
• 2013

Experiments were conducted to evaluate the effect of low temperature-darkness treatment on floral initiation in four kinds of Korean strawberry cultivars. Mother plants were planted on March 29 and daughter plants were raised for the experiment. Temperature treatment was done for 7, 14, and 21 days keeping $13^{\circ}C$ in cooling storage from August 29, September 5 and September 14 to September 21. After the treatment, flower bud initiation was examined by a microscope, and the seedlings were transplanted on hydroponic system with Yamazaki's strawberry solution of EC $0.8dS{\cdot}m^{-1}$ to check the flowering. 'Ssanta' and 'Maehyang' showed early flower bud initiation in 7 days treatment than 'Seolhyang' by microscope check. 'Ssanta', 'Daewang', and 'Maehyang' showed early flower bud initiation in 14 days treatment than 'Seolhyang'. There were no differences among the treatments in 21 days treatment. Percentage of flowering of 'Seolhyang' and 'Maehyang' by low temperature-darkness treatment didn't show any difference but 'Daewang' and 'Ssanta' showed high percentage of flowering. It suggested that low temperature-darkness treatment technique can be use for improving early flowering and yield of 'Ssanta' and 'Daewang' cultivars.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.1
• /
• pp.58-65
• /
• 2012

The crown-root fracture is defined as a fracture of tooth that contains enamel, dentin and cementum with or without pulp exposure. Generally the fracture lines place obliquely from labial surface, between incisal edge of the crown and marginal gingiva, to palatal surface subgingivally. If the fracture line is located supragingivally, the removal of tooth fragment and supragingival restoration can be performed. In subgingival fracture line, the surgical exposure, orthodontic eruption or surgical eruption can be considered. If the fracture line is too deep to restorate, extraction or decoronation can be selected. In children and adolescents, the extraction should be the last option. Another option to select before extraction is the restoration using fiber-reinforced post and the reattachment of tooth fragment. The fiber-rainforced post enhances the retention and the durability of tooth fragment. The reattachment of crown fragment using resin adhesive system is considered minimal invasive treatment biologically. This case reports the treatment of crown-root fracture using the reattachment of crown fragment and the insertion of fiber-reinforced post.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.1
• /
• pp.47-52
• /
• 2004

In this study, I attempted to develope the expression and purification system of human mammaglobin proteins in Escherichia coli and to produce anti-human mammaglobin rabbit antibody for the detection of human mammaglobin protein in the peripheral blood of breast cancer patients. Human mammaglobin gene was cloned and sequenced from m-RNAs purified from donated breast cancer tissues using RT-PCR. The cloned gene was inserted into pET30, pET22, and pET32 plasmid. The cloned gene in pET30 yields insoluble proteins which was difficult to purify from the cells extracts. The mammaglobin gene in pET32 was strongly expressed soluble proteins which were isolated using Ni-NTA affinity chromagraphy and DEAE-ion exchange chromatography, followed by enterokinase digestion of the purified proteins. The isolated proteins had enough purity to use as a antigen for the production of anti-mammaglobin antibody in rabbits. The polyclonal antibody produced against the isolated mammaglobin showed a specificity to mammaglobin after Westernblot immuno assay. In conclusion, the isolated mammaglobin protein and the anti-mammaglobin rabbit antibody may be used for diagnosis of breast cancer as well as development of anti-breast cancer drug.

• Journal of the Korean Magnetics Society
• /
• v.23 no.2
• /
• pp.49-53
• /
• 2013

A current sensor is one of important component which is used for the electrical current measurement during charge and discharge of the battery, and monitoring system of the motor controller in the electric and hybrid vehicle. In this study, we have developed an open loop type current sensor using GaAs Hall sensor and magnetic core has an air gap. The Hall sensor detect magnetic field produced by the current to be measured. The 3 mm air gap core was made by HGO electrical steel sheets after slitting, winding, annealing, molding, and cutting. Developed current sensor shows 0.03 % linearity within DC current range from -400 A to +400 A. Operating temperature range was extended to the range of $-40{\sim}105^{\circ}C$ using temperature compensating electronic circuit. To Improve frequency bandwidth limit due to the air flux of PCB (Printed Circuit Board) and Hall sensor, We employed an air flux compensating loop near Hall sensor or on PCB. Frequency bandwidth of the sensor was 100 kHz when we applied sine wave current of $40A{\cdot}turn$ in the frequency range from 100 Hz to 100 kHz. For the dynamic response time measurement, 5 kHz square wave current of $40A{\cdot}turn$ was applied to the sensor. Response time was calculated time reach to 90 % of saturation value and smaller than $2{\mu}s$.