• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.93-96
• /
• 2008

We analyze a precise seabed feature around the Hupo Bank by using Multi-beam echosounder. Multi-beam echosounder system can observe the topography undulation according to the navigation of the survey ship by shooting wide beam. It is possible to embody a precision seabed feature because it can be make high density of incompletion depth sounding between survey lines. Through this survey, there is the Hupo Bank which is 84 km long, 1-15 km wide, 5.3-160 m deep in the center, at the west is moat, at the east is scarp and submarine canyon. The top of the Hupo Bank is the Wangdol reef that has 5.3 m in depth of water at least. Moat in survey area is 30 m long, and 30-40 m wide and has a depressed channel. The gap of depth of water in scarp is approximately 60 m and shows a characteristic of cuttig plane. Submarine canyon is 3.5 - 13.5 km wide.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.4 s.74
• /
• pp.369-374
• /
• 2006

This paper describes dynamic characteristics of a power transmission tower consisting of lots of power lines and insulators. A numerical 3D modeling for the static, dynamic and buckling analyses of the power transmission tower is presented considering the case when the power lines are cut. Eigenvalue analysis indicates that the transmission tower shows different behavior comparing to usual structures governed by several low modes. The transmission tower is governed by lots of modes. It is verified that the transmission tower is structurally safe against the static wind and buckling loads. But the structural and buckling safety is not guaranteed when all power lines are cut, which comes to collapse the transmission tower. Further study is in need to overcome such case. Wind dynamic analysis shows that fluctuating wind loads increase the response of the tower.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.2 s.308
• /
• pp.81-92
• /
• 2006

This paper proposes a robustness watermarking for 3D mesh model based on projection onto convex sets (POCS). After designing the convex sets for robustness and invisibility among some requirements for watermarking system, a 3D-mesh model is projected alternatively onto two constraints convex sets until the convergence condition is satisfied. The robustness convex set are designed for embedding the watermark into the distance distribution of the vertices to robust against the attacks, such as mesh simplification, cropping, rotation, translation, scaling, and vertex randomization. The invisibility convex set are designed for the embedded watermark to be invisible. The decision values and index that the watermark was embedded with are used to extract the watermark without the original model. Experimental results verify that the watermarked mesh model has invisibility and robustness against the attacks, such as translation, scaling, mesh simplification, cropping, and vertex randomization.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.731-733
• /
• 2016

The primary goal of the line tracer is to accurately and quickly detect the movement up to the target position given by the sensor juhaengseon. It has been used in applications in various fields such as the current unmanned transport vehicles, laser cutting machine, autonomous mobile robots and unmanned driving is possible, and is held annually at various universities in the competition field with the possibility of great progress, depending on the application. However, there arises a large difference in running performance, depending on the hardware design and control. In this paper, improving the characteristics of the tracer line and characters to design a PID controller is to apply the point on ways of improving the properties of the system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.61-66
• /
• 2011

A new via structure on printed circuit board has been proposed for differential signaling in applications of high-speed interconnection. In new structure, the via is physically separated and then divided into two electrically-isolated sections using mechanical drill routing process. These cutted vias are connected respectively to the traces of the differential pair. New via structure makes possible to rout the differential pair using only one via, while conventional via structure needs two vias for interconnection. Because the spacing even in via region keeps almost constant, new via structure can alleviate an impedance discontinuity and then enhance its signal transmission characteristics such as reflection loss and insertion loss. It is expected that new via structure is effective in differential signaling for high-speed interconnection.

• KOMUNHWA
• /
• no.64
• /
• pp.47-74
• /
• 2004

The aim of this research is to investigate various aspects and its meanings of Daegu Yangnyongshi Hanbang(韓方: traditional herb medicines) culture being handed down 350 years ago for understanding korean folk medicine. Yangnyongshi(藥令市: Medicinal Herb Mark

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.40-48
• /
• 2013

Eco deck plate system is a construction method that deconstruction of galvanized steel sheets is possible by integrating steel-wire-integrated girders and the galvanized steel sheets with bolts. Therefore, compared with previous steel-wire-integrated deck plates which were joined by welding, the system is acknowledged as the construction method possible management and repair. This study conducted an experimental research by manufacturing total 24 full size specimens in a same condition for 12-shape specimens by two parts to evaluate structural behaviors of the eco deck plates. In the results after the test, permissible deflection for the construction load action was shown to be values under design values and satisfactory. The processing of lattice steel wires was presented to be structurally advantageous in being manufactured by cutting downward. Also, in case of a specimen that D13 as a steel wire was used, destruction occurred at the welding part of the bottom steel wire and the lattice steel wire, so improvement measures for the welding in factory manufacture are necessary.

• Journal of the Korean association of regional geographers
• /
• v.22 no.2
• /
• pp.439-449
• /
• 2016

Understanding the variability of the monsoon system requires information about the changes in the past. We revealed the Mid- and Late-Holocene paleo-climate changes and Asian monsoon variations in Korea by the speleothem records from Pyeongchang. To this, we used thicknesses of growth laminae, stable-isotope analysis (carbon, oxygen), and radio-carbon age dating. The speleothem grew between ~4580 yr BP to ~660 yr BP and we identified several weak AM(Asian monsoon) events, such as Middle Bronze Age Cold Epoch, Iron Age Cold Epoch, and Dark Age Cold Period. These events might have occurred relatively early compared to those of other studies.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.2
• /
• pp.125-129
• /
• 1998

Cucumber (Cucumis sativus L.) plants were regenerated through organogenesis and somatic embryogenesis in cotyledon and hypocotyl cultures. The shoots were efficiently formed on the basal region of cotyledons cultured on MS medium containing 1.0㎎/L zeatin and 0.1㎎/L IAA in all cultivars used. Embryogenic calli were formed on hypocotyl segments cultured on MS medium containing 1.0㎎/L 2,4-D in cv. group 'Nakhab' and maintained by consecutive subculture on the same medium every 2-3 weeks without loss of embryogenic ability. Upon transfer to MS basal medium, high frequency somatic embryogenesis was achieved easily from embryogenic callus. Regenerated plantlets through organogenesis and somatic embryogenesis were transplanted to pots and gradually acclimatized to greenhouse condition where they subsequently produced fruits.

• Journal of Plant Biotechnology
• /
• v.29 no.1
• /
• pp.25-29
• /
• 2002

The study was carried out to establish an efficient protocol for shoot organogenesis and plant regeneration from stem explant cultures of Lycopersicon esculentum cv. Micro-Tom. The regenerated shoots obtained from stem explant cultures on solid MS medium containing the different concentrations of BAP. The highest number of shoots (5.3) per explant and shoot growth (0.7 cm) was obtained on MS medium containing 4.0 mg/L BA. The additions of AgNO$_3$ and putrescine substantially improved the shoot regeneration frequency, at the optimal concentration of 7 mg/L and 50 mg/L respectively. The regenerated shoots (about 1 cm) were normal and could be easily rooted with 0.1 mg/L IBA treatment. The rooted plants were hardened and transferred to vermiculite with a 92% survival rate where they grew normally.