• Proceedings of the Korean Statistical Society Conference
• /
• 2002.05a
• /
• pp.127-132
• /
• 2002

절단된 정규분포의 평균과 분산을 추정하기 위하여 전체 표본에 기초한 최대가능도 추정량을 사용한 방법과 절단된 후에 남아있는 표본만을 고려한 절단된 표본의 표본평균과 표본분산을 시뮬레이션을 통해 비교 연구하였다. 평균을 추정하는 경우에는 놀랍게도 절단된 자료에 기초한 추정량이 전체 표본에 기초한 추정량보다 평균제곱오차가 더 작다는 것을 발견하였다.

• Nuclear Engineering and Technology
• /
• v.20 no.3
• /
• pp.179-188
• /
• 1988

A recently developed spatial differencing scheme, Linear Characteristic (LC) scheme is compared with some traditionally used schemes such as Step Difference (SD), Diamond Difference (DD), and Step Characteristic (SC) scheme by analyzing the truncation error calculated numerically in slab geometry. Those four candidate schemes are applied to one simple source sink problem and two criticality problems (one is calculation of multiplication factor and the other is slab critical half thickness). The calculated results are then examined by some equitable measures of error. It is concluded that the LC scheme is terribly more powerful than any other candidate scheme that has been prevalent up to the present time. Moreover, the LC scheme estimates integral parameter such as multiplication factor and critical half thickness much more efficiently than SD or SC scheme. This is due to the fact that the fortuitous error cancellation, which occurs when the deviations of cell average flux are summed over the whole gamut of spatial meshes, happens much more favorably to the LC scheme.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.61-68
• /
• 1994

Neglecting distant zones in the computation of geoidal heights using Stokes'formula give rise to some truncation errors. The GRS80 Korean Gravimetric geoid Model 1993(KGM93) of the South Korea region was implemented, in this paper, using a combination of satellite-derived GEM-T2 gravity and terrestrial gravity data. A spherical cap size of 30 degree is used on the integration and the truncation error is compensated to the free-air geoid. The results of this study show that the accuracy of the KGM93-C has one meter level.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.210-216
• /
• 2002

본 연구는 오이 수확기 개발을 위해 메니퓰레이터를 설계 제작하였다. 실험에 사용한 3축 메니퓰레이터는 견고성, 내구성, 모멘트를 줄이기 위해 모터 및 감속기 등이 하중이 실리지 않는 곳에 장착하였다. 주요 연구 결과를 요약하면 다음과 같다. 1) 3차원 공간상의 좌표에 대하여 메니퓰레이터의 10회 반복 위치 오차는 Z축에 관계없이 0.1mm 내외로 정확하게 작동하는 것으로 나타났다. 2) 실내 실험에서 25개의 오이에 대한 실험 결과 22개의 절단하여 92%의 성공률을 보였으나, 원인은 오이가 기형과이며, 수확한 후 시간이 경과하여 오이 과병의 물성이 변한 것으로 판단된다. 3) 실내 실험에서 오이 과병을 절단하지 못한 경우에도 메니퓰레이터는 오이에 0.1m 내외로 엔드이펙터을 접근시켰다. 4) 50개의 오이에 대하여 현장 실험을 한 결과 42개, 84%의 절단율을 보였다. 오차가 16% 발생한 것은 수확적기가 지나서 오이의 과병이 짧고 뭉툭해서 나타난 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.1955-1960
• /
• 2010

A performance of CNC 3-axis pipe profile-cutting machine we developed was evaluated by measuring and verifying a positioning accuracy of its feeding unit and a cutting shape accuracy of pipe workpiece. The positioning accuracy was verified by comparing moving distance actuated by PLC motion controller with actual one measured by a laser interferometer. The cutting shape accuracy was also verified by comparing a cutting shape obtained through scanning and 3D modeling the pipe workpiece with that through CL data.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.222-233
• /
• 2000

A methodology for determining age by otolith of small yellow croaker, Pseudosoiaena polyactis Bleeker, was developed. A thin section method was chosen to be suitable for age determination because the otolith had a three-dimensional shape and thus it was not possible to read the otolith rings on the surface. The clear rings were identified on the vertical-axis cross-sectioned otoliths. The total length-total weight relationship and the growth parameters were estimated with error structure to endow with accuracy. In the relationship between total length and total weight, a multiplicative error structure was assumed because variability in growth increased as a function of the length, and the estimated equation was $W=0.0049L^{3.2153}$. The variability in growth was constant as a function of the age, revealing an additive error structure. The von Bertalanffy growth parameters were obtained from a nonlinear regression as $L_{\infty}= 37.11cm, K=0.20/yr and t_0=-1.88.$

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.5
• /
• pp.36-43
• /
• 1999

A new design of a Direct Digital Frequency Synthesizer(DDFS) is presented, where a pipelined Coordinate Rotate Digital Computer(CORDIC) circuit is employed to calculate amplitude values of all the phase angles of sinusoidal waveforms produced. a near-optimal number of pipeline stages is determined based on an error analysis of calculated amplitude values in terms of the number of bits. The DDFS was implemented using a field programmable gate array, yielding a stable operating frequency of 11.75MHz. The measurement results show higher resolution, faster operating speed and simpler fabrication process, compared to ROM-based counterparts. The CORDIC-based DDFS yields 5 times higher resolution than conventional ROM-based versions.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.5
• /
• pp.927-934
• /
• 2010

In this paper, we introduce a method of parameter estimation of progressive Type I interval censored sample and progressive type II censored sample. We propose a new parameter estimation method, that is converting the data which obtained by progressive type I interval censored, those data be used to estimate of the parameter in progressive type II censored sample. We used exponential distribution with unknown scale parameter, the maximum likelihood estimator of the parameter calculates from the two methods. A simulation is conducted to compare two kinds of methods, it is found that the proposed method obtains a better estimate than progressive Type I interval censoring method in terms of mean square error.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1996.10a
• /
• pp.66-67
• /
• 1996

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.120-130
• /
• 1994

The leadwire cutting machine that has been used recently cuts leadwires by putting one-side force with the same priciple as a saw, and applies a stress at soldered part of PCB. Because the stress becomes one cause of contact-defect, a leadwire cutting robot that cuts leadwire-site with nipper and does not apply stress is considered, In this paper a technique of detecting leadwire-site is studied for the purpose of using on automatic leadwire cutting robots. A technique deriving 2-dimensional site-information with many I-dimensional binary data of perspective front-view of PCB taken from various direction was proposed. Simulation and experiments were done under the same condition each other and a small universal PCB was choosen as an experimental object. As a result of simulations and experiments, the proposed technique turns out to be very useful for automatic leadwire cutting robots.