• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.57-65
• /
• 1995

The electrochemical reduction of methylene blue (MB) in 1.0${\times}$10-2 M KNO3 aqueous solution was investigated by direct current (DC), differential pulse (DP) polarography, cyclic voltammetry (CV) and controlled potential coulometry (CPC). The electrode reduction of melthylene blue was processed CE reaction mechanism by two electrons transfer at the first reversible wave (- 0.18 volts vs. Ag/AgCl). MB was strongly adsorbed on the stationary mercury electrode and the reduction product of conptrolled potential electrolysis was rapidly auto-oxidized in air to the original methylene blue. Upon the basis of interpretation of cyclic voltammogram with pH change, possible CE electrode reaction mechanism was suggested.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.83-91
• /
• 1993

The eletrochemical behavior of light lanthanide complexes has been investigated by several electrochemical techniques in alkaline solutions. The composition of the complexes was determined by spectrophotometric method to be 1 : 1 and reduction mechanism was two steps 1 electron transfer reaction. The half wave potential of first peak depended on pH and cathodic current showed remarkably adsorptive properties. The results of DC and CV investigation demonstrated the quise-reversible nature of the electron transfer. The anion radical formed after first one electron reduction process, dimerizes to form dimer. The apparent irreversible behavior of the second wave is a result of the existence of a fast protonation following the second electron transfer. An exhaustive electrolysis was carried out at controlled potential of -1.80 V, deep blue color of the solution became progressively weaker, and then the solution became colorless solution. The final product of an exhaustive electrolysis is electro-inactive. The appearance of four steps may be explained by the fact the reduction of Ln-OCP elucidated ECEC mechanism.

• Clean Technology
• /
• v.18 no.4
• /
• pp.426-431
• /
• 2012

Carbon-rich coal can be utilized as a fuel for direct carbon fuel cell (DCFC). However, left-behind ash after the electrochemical oxidation may hinder the electrochemical reactions. In this study, we produced ash-free coal (AFC) by thermal extraction and then tested it as a fuel for DCFC. DCFC was built based on solid oxide electrolyte and the electrochemical performance of AFC mixed with $K_2CO_3$ was compared with AFC only. Significantly enhanced power density was found by catalytic steam gasification of AFC. However, an increase of the power density by catalytic pyrolysis was negligible. This result indicated that a catalyst activated the steam gasification reactions, producing much more $H_2$ and thus increasing the power density, compared to AFC only. Results of a quantitative analysis showed much improved kinetics in AFC with $K_2CO_3$ in agreement with DCFC results. A secondary phase of potassium on yttria-stabilized zirconia (YSZ) surface was observed after the cell operation. This probably caused poor long-term behavior of AFC with $K_2CO_3$. A thin YSZ (30 ${\mu}m$ thick) was found to be higher in the power density than 0.9 mm of YSZ.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.93-97
• /
• 2003

The electrode for a supercapacitor was prepared using an amorphous ruthenium oxide, which was synthesized from ruthenium trichloride hydrate$(RuO_2{\cdot}nH_2O)$. A supercapacitor was assembled with an electrode of ruthenium oxide material on a current collector of tantalum, and an electrolyte of 4.8 M sulfuric acid. The result of the AC impedance analyses on $Ta/H_2SO_4(4.8 M)/Pt$ cell showed that tantalum was stable at the potential range of $0.0\~1.1V(vs. SCE)$. Therefore, Ta film could be used the supercapacitor as a current collector. The irreversible hydrolysis in the supercapacitor occurred over ca. 1.0V(vs.SCE) when the supercapacitor was protonated to 0.5V(vs. SCE). The supercapacitor protonated to 0.5V(vs.SCE) showed good electrochemical properties when it was tested at the potential range of 1.0V in the charge-discharge test. The potential range of the electrodes including the positive and the negative electrode was varied between -0.004 and 0.995V(vs. SCE). The potential ranges of the positive and the negative electrode were $-0.004\~0.515V(vs.\;SCE)\;and\; 0.515\~0.995V(vs.\;SCE)$, respectively.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.122-134
• /
• 1998

In this review, we describe the electrochemical properties of spinel-type lithium manganese oxides $(Li_xMn_2O_4)$ and their failure modes encountered in 4 V lithium rechargable cells. The long-term cyclability (reversibility) of spinel electrodes is determined partly by the purity, size and distribution of spinel particles, and also by the microstructure of electrode plates. A proper selection of electrolytes is another important task in cyclability enhancements. In the spinel preparation, impurity formation and cation mixing should be minimized. The carbon content in composite cathodes should also be minimized to the extent where the cell polarization does not bring about adverse effects on cell performances. The binder content should be optimized on the basis of dispersion of component materials and mechanical strength of the plates. Cathodic capacity losses arising from solvent oxidation and spinel dissolution can be mitigated by using electrolytes composed of carbonates and/or fluorine-containing lithium salts. The carbon additives may be selected after a trade-off between the cell polarization in composite cathodes and the solvent oxidation on carbon surface.

• Clean Technology
• /
• v.22 no.1
• /
• pp.16-28
• /
• 2016

Textile industry is considered as one of the most polluting sectors in terms of effluent composition and volume of discharge. It is well known that the effluents from textile dying industry contain not only chromatic substances but also large amounts of organic compounds and insolubles. The azo dyes generate huge amount of pollutions among many types of pigments. In general, the electrochemical treatments, separating colors and organic materials by oxidation and reduction on electrode surfaces, are regarded as simpler and faster processes for removal of pollutants compared to other wastewater treatments. In this paper the electrochemical degradation characteristics of dye wastewater containing CI Direct Blue 15 were analyzed. The experiments were performed with various anode materials, such as RuO₂/Ti, PtO₂/Ti, IrO₂/Ti and graphite, with stainless steel for cathode. The optimal anode material was located by changing operating conditions like electrolyte concentration, current density, reaction temperature and initial pH. The degradation efficiency of dye wastewater increased in proportion to the electrolyte concentration and the current density for all anode materials, while the temperature effect was dependent on the kind. The performance orders of anode materials were RuO₂/Ti > PtO₂/Ti > IrO₂/Ti > graphite in acid condition and RuO₂/Ti > IrO₂/Ti > PtO₂/Ti > graphite in neutral and basic conditions. As a result, RuO₂/Ti demonstrated the best performance as an anode material for the electrochemical treatment of dye wastewater.

• Journal of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.258-270
• /
• 1987

A series of new thorium nitrate complexes with crown ethers have been synthesized from the reaction of the hydrated thorium nitrate, with the appropriate crown ethers of different cavity sizes in various solvents such as methanol, ethanol, butanol, methylacetate, acetone, tetrahydrofuran and acetylacetone. CHN elemental analysis, ICPAS, thermal analysis and Karl-Fischer method have been used to characterize their compositions, and the spectroscopic methods of IR, UV, $^1H-NMR$, and X-ray diffraction have been employed to determine the structures and solvolysis phenomena of these complexes. and the electrical conductances were measured in DMSO, and water solvent. The solvolysis have been observed only in the complexes synthesized in acetylacetone solvent. In the solvated complexes of 15-crown-5 and 18-crown-6, the mole ratio of $Th^{4+}$: ligand : acetylacetone is found to be 1:1:1, but in the non-solvated complexes of 12-crown-4 and 15-crown-5, the mole ratios of Th:L are 1:2 and 2:3, respectively, and that in the complexes of both 18-crown-6 and dicyclohexano-18-crown-6 is 1:1. All complexes which were not solvated have shown $n{\to}{\sigma}^{\ast}$ electronic transitions of crown ether whereas complexes solvated have exhibited both $n{\to}{\sigma}^{\ast}$ of crown ether and $n{\to}{\pi}^{\ast}$ transitions of acac. The dissociation mole ratio of $Th^{4+}$ and nitrate ion is found to be 1:1 in aprotic solvent, and 1:4 in protic solvent like water.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.2
• /
• pp.59-64
• /
• 2014

Crystallographic phases of Plasma electrolytic oxidized Al alloy, A1050, were investigated. The electrolyte of PEO was $Na_2Si_2O_3$ and KOH. Unipolar pulse, $ 2000{\mu}sec$ with $400{\mu}sec+420V$ impulse, were applied for 2 min, 5 min, 15 min, and 30 min. ${\gamma}-Alumina$, as well as ${\alpha}-alumina$, was main crystal phase. ${\gamma}-Alumina$ was appeared in the beginning, then the amount of ${\alpha}-alumina$ was increased with time, but the amount of ${\gamma}-Alumina$ remained constant without any increasing. So, it is concluded that plasma gas produce ${\gamma}-Alumina$ at the first, and then ${\gamma}-Alumina$ transform ${\alpha}-alumina$ finally. During the transformation, high temperature of micro plasma gives transformation energy.

• Applied Microscopy
• /
• v.38 no.1
• /
• pp.11-19
• /
• 2008

To examine the effect of the electrolyzed alkaline reduced water (ERW) on animal immunity, by employing Echinostoma hortense that is a parasite in the small intestine, the immune response of C57BL/6 was examined. To C57BL/6 mice, Echinostoma hortense metacercaria 15 per animal was in oculate dorsally, the worm was collected after 2 weeks, and the change of goblet cells and mast cells in the mucosa of small intestine was examined, and by using a protein chip, the change of cytokines in the serum was compared and observed. As a result, average 8.3 worms were collected from the C57BL/6 mice infected with E. hortense, and in the group fed with the ERW, average 10 worms were collected. In regard to the examination of the change of goblet cells, in the experimental group infected with E. hortense and fed with the ERW, average 4.3 worms per villus were detected, hence, it was found that the expression of goblet cells was low (p<0.001). Regarding the examination of the change of mast cells, similarly, in the group infected with E. hortense and fed with the ERW, average 11 worms per villus were detected, and it appears to be less than control group (p<0.001). Regarding the expression of cytokines in mouse serum, in comparison of the experiment group infected with E. hortense and control group, in the expression of the Th1 cytokines IL-6, IL-$1{\beta}$, IFN-${\gamma}$, TNF-${\alpha}$, and IL-2, and the Th2 cytokines IL-4, IL-5, IL-10, and IL-13, a significant difference was not detected. In our study, it was found that in the infection of E. hortense, the ERW mediates its effect on the number of goblet cells and mast cells in the intestinal mucosa, and simultaneously, the worm expulsion was delayed, and thus the conclusion that the ERW mediated its effect on the intestinal immunity of mice was obtained.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.27-36
• /
• 2012

Metal chloride waste is generated as a main waste streams in a series of electrolytic processes of a pyrochemical process. Different from carbonate or nitrate salt, metal chloride is not decomposed into oxide and chlorine but it is just vaporized. Also, it has low compatibility with conventional silicate glasses. Our research group adapted the dechlorination approach for the immobilization of waste salt. In this study, the composition of SAP ($SiO_2-Al_2O_3-P_2O_5$) was adjusted to enhance the reactivity and to simplify the solidification process as a subsequent research. The addition of $Fe_2O_3$ into the basic SAP decreased the SAP/Salt ratio in weight from 3 for SAP 1071 to 2.25 for M-SAP( Fe=0.1). The experimental results indicated that the addition of $Fe_2O_3$ increased the reactivity of M-SAP with LiCl-KCl but the reactivity gradually decreased above Fe=0.1. Also, introducing $B_2O_3$ into M-SAP requires no glass binder for the consolidation of reaction products. U-SAP ($SiO_2-Al_2O_3-Fe_2O_3-P_2O_5-B_2O_3$) could effectively dechlorinate the LiCl-KCl waste and its reaction product could be consolidated as a monolithic form without a glass binder. The leaching test result indicated that U-SAP 1071 was more durable than other SAPs wasteform. By using U-SAP, 1 g of waste salt could generated 3~4 g of wasteform for final disposal. The final volume would be about 3~4 times lower than the glass-bonded sodalite. From these results, it could be concluded that the dechlorination approach using U-SAP would be one of prospective methods to manage the volatile waste salt.