• Solar Energy
• /
• v.15 no.3
• /
• pp.141-149
• /
• 1995

The tungsten oxide thin films were prepared on $s_i$ wafer by using an electron-beam evaporation technique. Thickness and structure of tungsten oxide film degraded in various electrolytes were analyzed by Rutherford backscattering spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscope. Thickness of $WO_3$ film was the most dissolved in 1M $H_2SO_4$ electrolytye. We have confirmed that the degradation of this films was accelerated by $H_2O$ in electrolytes. But the electronic structure of film degraded by electrolyte contained of glycerol was not changed as comparision with as-deposited film. The degradation may be attributed to a change of thickness and the surface morphology of the film.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.77-84
• /
• 2010

Reduction of oxides has been investigated for the volume reduction and recycling of the spent oxide fuel from commercial nuclear power plants. Various oxide reduction methods were proposed and KAERI (Korea Atomic Energy Research Institute) is currently developing an electrochemical reduction process using a LiCl-$Li_2O$ molten salt as a reaction medium. The electrochemical reduction process, the front end of the pyroprocessing, can connect the PWR (Pressurized Water Reactor) oxide fuel cycle to a metal fuel cycle of the sodium cooled fast reactor. This paper summarizes KAERI efforts on the development, improvement, and scale-up of the oxide reduction process.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.132-137
• /
• 2010

This study is concerned the electrocatalytic generation of oxygen gas at electrochemically deposited manganese oxide electrode in KOH solution. Manganese oxide nanoparticles electrodeposited onto relatively substrate, e.g glassy carbon, Au, Ti electrode. MnOx is electrodeposited in nanorod structure which cover the overall surface of the substrate. The $\gamma$-MnOOH that is kind of manganese oxide species plays a significant role as a catalytic mediator, which promote 4-electron reduction process. Modified electrodes with electrodeposited manganese oxide structures resulted in significant decrease in the anodic polarization compared with the unmodified electrodes in alkaline media.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.175-180
• /
• 2012

The shape of floating superstructure is the same as other buildings, but the foundation is based not on land but on a floating body. Unlike inland structures, they are largely influenced by the wave load. Deformation of the floating pontoon due to the wave loads affects the connection, which in turn causes problems related to the habitability and safety to the superstructure users. Accordingly, this study conducted elastic analysis regarding rigid connection and semi-rigid connection by the integration analysis that combined together the superstructure and pontoon of the 3-D floating structure. Moreover, this study investigated the results of the separation analysis excluding pontoon and the integration analysis. In addition, elasticity analysis was used to divide up the wave loads cases, and to classify the moment and displacement of the structure depending on connection following the changes in the wave loads.

• Resources Recycling
• /
• v.21 no.5
• /
• pp.31-37
• /
• 2012

As a recovery of elemental silicon from the sludge of Si wafer process, a process of mechanical separation-chlorine roasting-electrolysis has been suggested. The silicon sludge consisted of Si, SiC, machine oil, and metallic impurities. The oil and metal impurities was removed by mechanical separation. The Si-SiC mixture was converted to silicon chloride by chlorine roasting at $1000^{\circ}C$ for 1 hr and the silicon chloride was dissolved into an ionic liquid of $[Bmpy]Tf_2N$ as an electrolyte. Cyclic voltammetry results showed an wide voltage window of pure $[Bmpy]Tf_2N$ and a reduction peak of elemental Si from $[Bmpy]Tf_2N$ dissolved $SiCl_4$ on Au electrode, respectively. The silicon deposits could be prepared on the Au electrode by the potentiostatic electrolysis of -1.9 V vs. Pt-QRE. The elemental silicon uniformly electrodeposited was confirmed by various analytical techniques including XRD, FE-SEM with EDS, and XPS. Any impurity was not detected except trace oxygen contaminated during handling for analysis.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.293.1-293
• /
• 2001

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.4
• /
• pp.269-278
• /
• 2005

In order to produce only a pH-controlled solution without discharging any unwanted solution, this work has developed a continuous electrolytic system with a pH-adjustment reservoir being placed before an ion exchange membrane-equipped electrolyzer, where as a target solution was fed into the pH-adjustment reservoir, some portion of the solution in the pH-adjustment reservoir was circulated through the cathodic or anodic chamber of the electrolyzer depending on the type of the ion exchange membrane used, and some other portion of the solution in the pH-adjustment reservoir was discharged from the electrolytic system through the other counter chamber with its pH being controlled. The internal circulation of the pH-adjustment reservoir solution through the anodic chamber in the case of using a cation exchange membrane and that through the cathodic chamber in the case of using an anion exchange membrane could make the solution discharged from the other counter chamber effectively acidic and basic, respectively. The phenomena of the pH being controlled in the system could be explained by the electro-migration of the ion species in the solution through the ion exchange membrane under a cell potential difference between anode and cathode and its consequently-occurring non-charge equilibriums and electrolytic water- split reactions in the anodic and cathodic chambers.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.221-221
• /
• 2015

폐 자원에서 회수한 주석 조금속의 주석 순도 및 불순물 순도, 전해정련 및 진공정련 후 주석 순도를 ICP-OES (Inductively Coupled Plasma Optical Emission Spectrometer)분석을 통해 확인하였다. 무기산 전해액에서 전해정련 수행결과 고순도 주석을 확보하였고, 이후 증기압, 온도 및 유지시간 별 진공정련 수행결과 초고순도 주석을 회수할 수 있는 최적화 기술을 도출하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.207-212
• /
• 1996

실증규모의 수지충전식 전기투석 재생조를 사용하여 농축음극액내 바나듐의 전기화학적 환원 방법에 의한 재생거동을 조사하였다. 전기투석 분리재생 종료후 남아있는 개미산용액을 전해액으로 사용한 농축음극액내 전기투석된 철 및 코발트는 음극액의 pH를 약 4.3내외로 조절하면 전해환원에 의해 전착.제거된다. 또한 농축음극액내 바나듐은 +2가로 전해환원 되어 착화물을 이루고 있는 Vanadous picolinate 형태로 존재하기 때문에 음극액은 농축된 LOMI 제염제로 재생된다. 이 전해환원에 의한 농축음극액의 재생방법은 제염폐액의 전기투석 분리재생 후 피콜리네이트 착화제만을 재사용하는 기존의 재생개념보다 더욱 효과적으로 제염폐액을 재생시켜 재활용할 순 있는 방사성폐기물의 감용효율이 큰 향상된 제염폐액 재생공정이다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.51-52
• /
• 2011

본 연구에서는 전해 구리도금막과 SiN 피복층 사이의 힐락 (Hillock) 및 보이드 (Void) 결함에 미치는 전해 구리도금 공정 및 CVD SiN 피복층 증착 전 NH3 플라즈마 처리 효과에 대해 연구하였다. SiN 피복층 증착전 NH3 플라즈마 효과를 정량화하기 위해 실험계획법을 이용해 NH3 플라즈마 공정 인자가 힐락 결함의 밀도에 미치는 영향에 대해 고찰하였다. 실험결과, 힐락 결함의 밀도는 NH3 플라즈마 인가 시간에 비례한다는 것을 알았다. 보이드 결함의 경우, 구리 씨앗층 및 NH3 플라즈마 조건의 최적화를 통해 구리 씨앗층의 표면 조도를 최소화할 경우 보이드 결함이 최소화된다는 것을 알 수 있었다. 이는 구리 씨앗층의 표면 조도를 최소화함에 따라 전해 구리도금막의 결정립 크기가 커져 결정립 계면에 존재하는 불순물 양이 줄어들었기 때문인 것으로 사료된다.