• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.190-191
• /
• 2014

마그네슘 합금을 생체재료로 사용되는데 두가지 중요한 문제점을 가지고 있다. 매우 빠른 부식을 가지고 있으며, 초기 빠른 부식으로 수소기체를 발생하여 인체 내 피부나 골조직의 괴사를 동반한다. 이러한 문제점을 해결하기 위해 생체적합성이 뛰어난 아노다이징 방법을 개발 하였으며, 새롭게 개선된 방법의 특징을 비교하기 위해 이번 실험에서는 불화물이 포함된 전해액으로 아노다이징 처리한 샘플을 제조하여 형태학 분석을 진행 하였고, Hank's solution(생체모사용액)을 사용하여 부식 특성을 분석하였다. 또한 L929 세포를 이용하여 세포독성 평가를 진행하였다. 새롭게 제조한 방법은 기존의 방법과 비교하였을 때, 부식 성능은 비슷하고 생체적합성이 높아 생분해성 금속의 표면처리에 적합하다고 판단된다.

• Journal of Surface Science and Engineering
• /
• v.30 no.6
• /
• pp.412-418
• /
• 1997

The surface appearance of zinc coating chromated electrochemically was investigated with the concentration of impurities in chromating solution. The chromium content and yellowness of chromated film decreased with more than 0.1g/1 Zn in chromating solution, while white ness of it increased slightly. The chromium content and whiteness of chromated film also decreased with more than 0.1g/1 Fe in chromating solution, but the yellowness of it increased. Chromium content, whiteness and yellowness of chromated film decreased slightly with more than 0.5g/1 $Cr^{3+}$<\TEX>. But the chromium content and surface appearance of chromated film are not influenced with less than 1.0g/1 Pb in chromating sloution.

• Journal of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.369-372
• /
• 1972

The dissociation constants of dibasic carboxylic acids $(HOOC(CH_2)_nCOOH$, n = 0~4] in methanol, N, N-dimethylformamide and acetonitrile have been determined by the potentiometric method with a glass electrode. The difference between over-all dissociation constants in each other solvent is found to be of the same order of magnitude, and the $K_1/K_2$ ratios in aprotic dimethylformamide and acetonitrile are much greater than those in protic methanol and water.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2530-2532
• /
• 1998

Micro gold electroplating structure is fabricated by surface micromachining process. The made structure is clamped-clamped beam and its 1st natural frequency is measured by resonance method. In order to find residual stress, first natural frequency of beam which has tensile stress inside is analysed using Rayleigh's method. Elastic modulus and residual stress are estimated from the measured natural frequency.

• Nuclear Engineering and Technology
• /
• v.10 no.1
• /
• pp.13-25
• /
• 1978

The present paper deals with the measurement of the environmental radioactivity at the Kori nuclear Power Plant site area for the Period of six years from December 1970 to December 1976. Gross alpha activity was measured in samples of airborne particulate. Gross beta measurement was performed on soil, water, airborne perticulate, pine needle, precipitation, fallout (gummed acetate paper) and various foodstuffs. Radioactivities of strontium-90 and cesium-l37 were determined by means of radiochemical analyses in samples of spinach, cabbage, barley, rice in terrestrial food, sea eel, shell fish, dulse, green laver in marine product and milk, and of fallout (cloumn), Furthermore, tritum was also analyzed in water sample of well, stream and sea by electrical enrichment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.4
• /
• pp.263-269
• /
• 2015

It is necessary to investigate the electrodeposition behavior of uranium and other elements on the cathode in the electrorefining process to recover the uranium selectively from the reduced metals of the electrolytic reduction process since transuranic elements and rare earth elements is dissolved in the LiCl-KCl eutectic salt. Study on separation factors of U, Ce, Y and Nd based on U and Ce was performed to investigate the deposition behavior of the cathode with respect to the concentration of rare earth elements in LiCl-KCl eutectic salt. After electrorefining with constant current mode by using Ce metal as a sacrifice anode, the contents of U, Ce, Y and Nd in the salt phase and the deposit phase of the cathode were analyzed, and separation factors of the elements were obtained from the analyses. Securing conditions of pure uranium recovery in the elctrorefining process was investigated by considering the separation factors with respect to $UCl_3$ and $CeCl_3/UCl_3$ ratio.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.9-15
• /
• 2005

In order to know the electrochemical decomposition characteristics of ammonia to nitrogen, this work has studied several experimental variables on the electrolytic ammonia decomposition. The effects of pH and chloride ion at $IrO_2$, $RuO_2$, and Pt anodes on the electrolytic decomposition of ammonia were compared, and the existence of membrane equipped in the cell and the changes of the current density, the initial ammonia concentration and so on were investigated on the decomposition. The performances of the electrode were totally in order of $RuO_2{\approx}IrO_2>Pt$ in the both of acid and alkali conditions, and the ammonia decomposition was the highest at a current density of $80mA/cm^2$, over which it decreased, because the adsorption of ammonia on the electrode surface was hindered due to the evolution of oxygen. The ammonia decomposition increased with the concentration of chloride ion in the solution. However, the increase became much dull over 10 g/l of chloride ion. The $RuO_2$ electrode among the tested electrodes generated the most OH radicals which could oxidized the ammonium ion at pH 7.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.352-358
• /
• 2002

The variations of the properties of Sr and Mg added $LaGaO_3$ system electrolyte with the amount of the additive and the sintering condition were studied. Main phase was (La$_{1-x}Sr_x)(Ga_{1-y}Mg_y)O_{3-\delta}$ phase for each compositions and the single phases $(La_{0.85}Sr_{0.15})(Ga_{0.85}Mg_{0.15})O_{3-\delta},(La_{0.85}Sr_{0.15})(Ga_{0.8}Mg_{0.2})O_{3-\delta}$ and $(La_{0.8}Sr_{0.2})(Ga_{0.8}Mg_{0.2})O{3-\delta}$ were obtained with the decrease in the sintering temperature and Mg addition. Thermal expansion coefficient of the $(La_{0.8}Sr_{0.2})(Ga_{0.8}Mg_{0.2})O_{3-\delta}$ decreased with the increase in the sintering temperature. Electric conductivity of electrolyte sintered at $1500^{circ}C$ for 1h was 0.14 S/cm at $800^{circ}C$ with 1 mA.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.116-123
• /
• 2019

Thermal batteries are also called molten-salt batteries as the electrolyte is mainly composed of molten salt. The molten-salt electrolyte is a solid that does not conduct electricity at room temperature, but when it is melted by a pyrotechnic heat source, it becomes an excellent ionic conductor. Thermal batteries are a kind of pyrotechnic battery because they operate only when the solid electrolyte is melted by the heat energy provided by pyrotechnic materials. Pyrotechnic components used in a thermal battery include heat sources, fuse strips, and an igniter. The reliability of these pyrotechnic components critically affects the reliability and performance of the battery that must supply electricity stably to guided munitions even under extreme environmental conditions. Different igniter types offer different advantages: notch-type igniters offer improved ignition probability, whereas film-type igniters offer improved safety. The addition of metal oxides to the heat paper could improve the burn rate, and the ignition reliability could be greatly improved by using it with a flame igniter at the same time. Using a two-step reduction process, high-purity Fe particles in coral form can be safely obtained.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.134-141
• /
• 2022

To improve the performance of aluminum-air batteries, it is very important to understand the effect of electrolytes on the electrochemical properties of electrodes. In this study, the effects of electrolyte cations on the electrochemical redox reactions proceeding at the negative and positive electrodes were investigated using electrolytes having the same anion but different cations such as NaCl, LiCl, CaCl₂, and ZnCl₂. It was confirmed by discharge test, scanning electron microscopy and X-ray diffraction analysis that electrolyte cations affect the discharge potential and specific capacity of the electrode. Precipitates were formed on the surface of the positive electrode by Ca²⁺ and Zn²⁺ ions, resulting in degradation of the performance of the positive electrode. In addition, Ca²⁺ ions passivated the negative electrode and accelerated the performance degradation. This suggests that the positive ions of the electrolyte have different effects on the electrochemical performance of the positive and negative electrodes.