• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제3권1호
• /
• pp.51-58
• /
• 1999

In this Paper, the Performance of the semi-anechoic chamber which is to be constructed by the cross-shaped ferrite absorbers with broadband frequency characteristics, has been evaluated by the image method. As a result it was confirmed that the cross-shaped absorber has excellent performance over the frequency range from 30 MHz to 3,000 MHz, while the tile and the gird-type ferrite absorbers have the bandwidth of 30 - 1,000 MHz.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.97-101
• /
• 2003

Mn-Zn ferrite microwave absorbers mixed with silicon for mobile phone were prepared and the effect of preparation temperature of specimens on absorption ability was studied. A sample with the thickness of 1 mm prepared at 70 $^{\circ}C$ showed excellent absorption ability of 3.4 ㏈ at 1.8 GHz which is a frequency band for mobile phone. A loss factor of tan $\delta$ > 1 is shifted toward lower frequency as increasing preparation temperature of specimens.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.159-160
• /
• 2010

In this paper, we compared the absorption abilities of AMP and Sendust EM wave absorbers for a port logistics RFID system. Firstly, we fabricated EM wave absorber samples by using each absorbing material, AMP or Sendust, and CPE (Chlorinated Polyethylene) with composition ratios 85 : 15 wt. %. Secondly, we designed the optimum EM wave absorber using the calculated material constants found from the measured input impedance of the samples. Therefore, we confirmed that imaginary factor of complex relative permeability influences absorption ability and that AMP is better absorbing material than Sendust at the frequency band of 433 MHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.117-120
• /
• 2008

In this paper, we developed the EM wave absorber for eliminating false images in collision-avoidance radar. First of all, we fabricated some samples in different composition ratio of $TiO_2$ and CPE. And the relative permittivities of samples are calculated from S-parameter of samples by using 1-port method. We designed and fabricated the EM wave absorber by using the calculated relative permittivity. As a result, the EM wave absorber with composition of $TiO_2$:CPE=70:30 wt% has thickness of 1.85 mm and absorption ability higher than 20 dB in the frequency range 76-77 GHz.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1883-1886
• /
• 1997

3차원 유한요소법에 정합 조건을 구현하기 위해 유한한 두께를 갖는 흡수체을 이용하였다. 흡수체는 자유공간과의 경계에서 모든 입사각에 대해 무반사특성을 갖으며, 일단 흡수체 내로 전파된 파는 흡수체의 끝에 도달하기 전에 흡수체를 통과하면서 충분히 손실되도록 하였다. 이러한 흡수체는 ${\varepsilon}_r$과 ${\mu}_r$에 비등방복소주대각텐서를 사용하여 구현된다. 구현된 흡수체층은 구형도파관에 적용하여, 전파상수를 이용하여 정합시킨 경우와 결과를 비교하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제19권9호
• /
• pp.1051-1057
• /
• 2008

In this paper, we analyzed the characteristics of the EM wave absorber which was fabricated by using flake sendust (soft metal magnetic powder). The flake sendust was made of 3 different granularity by attrition mill. First, we have fabricated 3 kind of EM wave absorbers using the flake sendust and CPE(Chlorinated Polyethylene) and measured the S-parameters of the EM wave absorber. The complex relative permittivity and permeability were calculated from the measured data and the variations according to a change of granularity were researched. As a result, it was confirmed that the EM wave absorber using flake sendust with the $140{\mu}m$ average granularity has outstanding absorption ability in high frequency range(C band) for the reduction of eddy current loss(increase of permeability) and the increase of space charge polarization(increase of permittivity).

• Journal of Navigation and Port Research
• /
• 제31권10호
• /
• pp.865-868
• /
• 2007

Recently, wireless LANs are often applied in home or office because of its various of convenience. Frequency range of wireless LANs specified by IEEE 802.11b is at 2.4 GHz. The bluetooth, the microwave oven, and the PDA(Personal Digital Assistants) uses, however, the same frequency band. So problems will be produced in these environments, such as multi-pass interference and system-to-system interference. These problems can be eliminated by using EM wave absorber. In this paper, we designed and fabricated EM wave absorber using MnZn-Ferrite, Sendust, and CPE( Chlorinated Polyethylene). The EM wave absorber with the ratio of material (MnZn-Ferrite : Sendust : CPE = 64 : 16 : 20 wt.%) has thickness of 3.7 mm and absorption ability more than 17 dB at 2.4 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제43권9호
• /
• pp.1-5
• /
• 2006

In this paper, the EM wave absorber was designed and fabricated for the collision-avoidance radar as a basic sensor of ITS(Intelligence Transport System), because radar system has some problems including false image and system-to-system interference. We fabricated some samples in different composition ratio of Carbon and CPE, and defined that optimum composition ratio of Carbon and CPE was 20:80 wt%. The complex relative permittivity was calculated by the measured data. And absorption abilities were simulated according to different thickness of the EM wave absorbers using the complex relative permittivity. The EM wave absorber was manufactured based on the simulated design. Simulated and measured results agree very well. As a result, the developed EM wave absorber with the thickness of 2 mm has absorption ability over 20 dB in frequency range of $76{\sim}77$ GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제19권2호
• /
• pp.244-249
• /
• 2008

In this paper, we designed and fabricated the EM wave absorber consists of Sendust and Mn-Zn ferrite for suppressing EM wave noise from PCB in ISM(Industrial, Scientific and Medical) band of 2.4 GHz. We fabricated several samples in different ratios of Sendust to Mn-Zn ferrite with CPE(Chlorinated Ploy-ethylene) as binder and confirmed that optimum composition ratio of absorbing materials was Sendust. Mn-Zn ferrite : CPE=70:5:20 wt.%. The absorbing abilities were simulated according to different thickness of EM wave absorber as the function of material constants calculated by measured data. Measured absorption ability was analyzed and compared with simulated result. The simulated result agree well with the measured ones. As a result, the developed EM wave absorber with thickness of 0.85 mm has absorption ability of 5.4 dB at 2.4 GHz and over 3 dB in frequency rage of 1.4$\sim$4.1 GHz.

• Journal of Navigation and Port Research
• /
• 제28권6호
• /
• pp.503-507
• /
• 2004

We prepared EM wave absorbers by using recycled Sr ferrite for GHz frequency, and investigated the effects of carbon additions and preparation temperatures on their EM wave absorption properties. A Sr ferrite EM wave absorber with the ratio of Sr ferrite: silicon rubber: carbon = 80 : 13.6: 6.4 wt% prepared at 7$0^{\circ}C$ showed -24 dB at 9.4 GHz and -23 dB at 5.5 GHz for 2 mm and 3 mm thickness, respectively.