• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.4
• /
• pp.32-42
• /
• 2013

We study the gap effect on detonating high explosives using numerical simulation. The characteristic acoustic impedance theory is applied to understand the reflection and transmission phenomena associated with gap test of high explosives and solid propellants. A block of charge with embedded multiple gaps is detonated at one end to understand the ensuing detonation propagation through pores and non uniformity of the tested material. A high-order multimaterial simulation provides a meaningful insight into how material interface dynamics affect the ignition response of energetic materials under a shock loading.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.161-167
• /
• 2014

This paper presents the results of permittivities of various materials by measurements of the dielectric properties for the materials in millimeter-wave band. Since the advantages of millimeter wave band include the miniaturization, weight reduction of component and a lot of information transfer, its study has received increasing attention of researches. Also, because of the characteristics of the band have the superior straightness and the small diffractive, in the band, the analysis for the reflection and transmission characteristics of the materials will be very important. Moreover, a low interference is one of characteristics of the band due to the fact that the millimeter wave is absorbed in the materials. Therefore, in this paper, the reflection and transmission characteristics of materials are measured in the band by using the free space method. Based on the presented result, the permittivities of the materials are derived by the calculation of Nicolson-Ross Weir method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.25-32
• /
• 2008

This paper presents the reflection and transmission measurements conducted at the 60GHz suitable to provide a high speed wide band service. Mean received power and standard deviation are calculated and used to compare the characteristics of radio wave propagation to the various obstacles between transmitting and receiving antennas at the frequency. The results show that the transmitted signal strength by the steel door and copper plate are about 40dB lower than in free space, those by the rubber plate, glass and styroform are about 3dB lower than in free space. Also, the re(looted signal strengths at the 60 degree grazing angle show that in case by the partition is about 23dB lower, by the surface of a wall is about 6dB lower than by the copper plate. The presented results can be used for the design of 60 GHz picocell communication network that the reflected and transmitted waves affect to the service area.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1997.05a
• /
• pp.87-91
• /
• 1997

시설원예의 현대화에 따른 각종 피복자재의 도입ㆍ개발과 시설재배 면적의 급속한 증가로 인해 그에 따른 피복자재의 광환경 특성이 검토되지 않고 피복자재가 이용되고 있다. 따라서 본 연구는 연질필름중 가장 피복재배면적이 많은 PE(Polyethylene)필름과 경질판PC (Polycarbonate), PET (Poyethylene terephthalate), 유리 피복자재의 광환경 개선을 위한 기초 연구로 실시하였다. 1. 피복자재별 광투과율은 PE가 약 80%, 유리가 약 90%로, 유리 온실은 완공후 4년이하 경과했음에도 약 5개월 된 PE 보다 광투과율이 높았다. 2. 피복자재별 광반사율은 PE가 가장 높은 약 3% 였고 PC>PET>유리의 순으로 나타났다. 3. 피복자재별 광흡수율은 PE는 전파장에 걸쳐 고루 흡수되었으나 PC, PET는 자외선의 흡수가 많았다. 4. 피복자재별 토마토 군락내 광분포에서 제 1과방의 광량은 시설내 투과일사의 약 15%정도였다. 5. 피복자재별 토마토엽의 증산속도는 PE가 다소 낮았으나 처리간 큰 차이는 없었다. 6. 수경재배의 토마토의 광합성속도가 토경재배 보다 낮았다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.158-158
• /
• 2010

최근 유리산업은 에너지 절감효과와 친환경 재료의 사용을 바탕으로 하여 기존 유리의 특성을 변화시켜 보다 양질의 재료를 생산해 내고자 한다. 또한 인위적으로 가시광선 전파장에 대한 투과율을 조절할 수 있는 유리 제작의 필요성이 대두되어 스마트 윈도우(smart window)라는 신소재유리가 주목받고 있다. 스마트 윈도우는 태양광의 투과율을 자유롭게 조절할 수 있는 물질을 윈도우에 삽입함으로써 필름을 장착하는 방식에 비하여 태양광의 투과율이 대폭 신장됨과 동시에 사용자에게 고도의 편의성을 제공하는 장점이 있다. 액정과 고분자 매트릭스를 혼합한 PDLC용액을 이용하여 $3{\times}4cm^2$ 크기의 스마트 윈도우를 제작하여 유리 두께, 광량, 스페이서 크기에 따른 투과율을 측정하였다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.3 no.1
• /
• pp.33-41
• /
• 1992

In this paper the propagation problems of waves nomally incident upon an anisotropic medium with arbitrary permittivity tensors are analyzed through the variational finite element method. First, a variational equation is derived from the new approach basd on the induction theorm, reactions, and reciprocity. Next, by using the finite element method, the propagation problems are solved from the obtained functional. Specially, the reflection and transmission coefficient and axis ratio are obtained on the case of normally incident upon a homogeneous and inhomogeneous anisotropic medium such as cold mgnetoplasma slab and showed agreement with those of the previous method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.1005-1008
• /
• 2006

In this paper, we provide data of wireless environment in indoor for Bluetooth and wireless LAN systems. To accurately measure transmission characteristic for influence of the indoor wall, we used radiation measurement system with antennas. And various structure and material of the indoor wall are measured. Results of the measurement show that the attenuation of power is about $1\sim3dB$ for cement wall(25cm). In the case of cement wall with steel frame, the attenuation of power was increased using horizontal polarization but was not affect using vertical polarization.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.104-108
• /
• 2002

본 논문에서는 전력보존에 근거하여 휴대 단말기에 의한 SAR 저감 방안을 제시한다. 흡수체 매질에서의 전파의 반사, 흡수 및 투과관계를 고찰하였으며 흡수체의 최대 흡수조건을 만족하기 위한 매질특성을 분석하였다. 정량적인 SAR 저감방식 논의를 위해 SRF(SAR Reduction Factor)를 정의한 후 다양한 흡수체의 구조에 따른 SAR 및 SRF를 분석하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.295-302
• /
• 2011

Ubiquitous is an information communication environment which peoples could connect on network without being conscious of the network and computer condition at anytime and anywhere. Presently, advanced technology, digital cities and eco-friendly cities using Ubiquitous technology are being focused through out the world. As recent information industry and communication technology have developed remarkably, studies on intelligent structures and structural maintenance methods by combining a general idea of connecting all objects on network by interpolating computers which is called Ubiquitous Computing, and USN(Ubiquitous Sensor Network) are being attempted. In this paper, a basic experiment on penetration of RF(Radio Frequency) sensor nodes using an experimental sample setting concrete and reinforcing bar as variables is studied to estimate the possibility of applying wireless sensor networks in structures. The spring of reinforcing bars, concrete thickness, intensity of radio frequency were set up as variables, transmitting and receiving distance were checked vertically and horizontally. Moreover, Spectrum Analyzer was used for checking the magnitude of the frequency used in order to measure the reduction of radio wave exactly. The radio wave reduction was numerically analyzed, and the influence of the wavelength was analysed as well. As a result, the penetration depth in concrete without reinforcing bars was 45cm, and in reinforced concretes which reinforcing bars placed at spacing of 5cm and 15cm, the penetration depth were 37cm and 45cm each. No influence on radio wave penetration depth were found when the spacing of reinforcing bars in the reinforced concrete structures becomes over 15cm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.701-708
• /
• 2010

The stress and displacement fields of a permeable propagating crack in orthotropic piezoelectric materials under anti-plane shear mechanical load and in-plane electric load are analyzed. The equations of motion for the propagating crack in piezoelectric materials are developed and the solution on the stress and the displacement fields through an asymptotic analysis was obtained. The influences of the piezoelectric constant and of the dielectric permittivity on the stress and displacement fields at the crack tip are explicitly clarified. Using the stress and displacement fields obtained in this study, the characteristics of stress and displacement at a propagating crack tip in piezoelectric materials are discussed.