• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.4
• /
• pp.308-315
• /
• 2009

Wave-current interaction due to strong ambient currents causes to alter wave properties such as wave height, wave profile and wave spectrum. In this study we first examined the SWAN model's applicability by comparing with an analytical solution of Suh et al. (1994) for wave-current interaction in finite water-depth. Numerical experiments using SWAN model have been conducted for Garolim Bay to estimate the design waveheights influenced by strong tidal currents. For the design wave periods of 8~10 sec, the design wave height of 3 m in NNW direction was increased by up to 40% when the incident waves encounter the opposing currents of 1.4 m/s while the wave height was reduced by 26% due to the following currents of 1.1 m at the bay mouth. This result indicates that the effect of wave-current interaction must be included to determine the design wave height if there exists a strong current.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.161-172
• /
• 1997

In this paper, electromagnetic scattering by a perfectly conducting strip grating on dielectric multilayers is analyzed for the normalized reflected and transmitted power by applying the Fourier-Galeakin moment method. The induced current density is expanded in a series of multiplication of chebyshev polynomials of the first kind and functions with appropriate edge boundary condition, the continuous condition of electromagnetic field is applied in the boundary planes. The confirm the validity of the proposed method, the nor- malized reflected and transmitted power obtained by varying the relative permittivity and thickness of each dielectric layers are evaluated and compared with those of the existing numerical method and a paper, and then the numerical results in this paper are in good agreement with those of the existing numerical method and the paper. The sharp variation position in the geometrically normalized reflected and transmitted power can be moved by the incident angle, grating period, and the relative permittivity and thickness of the dielectric multilayers, these sharp variation points which are called the Wood's anomaly of the Geome- trically normalized reflected power are observed as a main factor when the reflected powers of the higher order mode are transitted between propagating and evanescent modes, and the local minimum positions are slightly moved to the left hand direction in which grating period is getting small according to the increase of the relative permittivity of dielectric layers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5B
• /
• pp.321-329
• /
• 2012

Two regular progressive wave trains, the directions of which are slightly different from each other, develop a honeycomb pattern of wave crests due to their nonlinear interaction. In the honeycomb pattern of wave crest, the nodal line area, which has very low wave energy, is formed. When the honeycomb pattern is developed near the beach area, rip current evolves through the nodal line area formed in the cross shore direction. In this study, to confirm that the formation of honeycomb pattern of waves near the beach area is a dominant mechanism of rip current occurred at Haeundae beach, we performed a numerical simulation of nearshore circulation at Haeundae beach under an unidirectional and monochromatic wave condition by using a nonlinear Boussinesq equation model. As a result, wave refraction due to topographical characteristics (i.e., submerged shoal) of Haeundae gave rise to several wave trains propagating with slightly different directions toward the beach, and consequently rip currents well developed through the nodal line area of honeycomb patterns of wave crest. In addition, we found that a narrow-banded spectral wave condition (i.e., a swell spectrum) increases more likelihood of rip current than a broad-banded spectral wave condtion based on the simulations employing various wave spectra with an equivalent wave height and period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.1-8
• /
• 2020

The Ministry of Land, Infrastructure and Transport of Korea has been trying to spread integrated railway communication network technologies based on a major railway policy since 2012. As a result, the world's first commercial Long-Term Evolution - Railway (LTE-R) network was established on the Gangneung line (Manjong station - Gangneung station) and has been commercially operating as a railway communication system since 2017. Special function and performance requirements are needed for safe and efficient railway operations, such as group calls, emergency calls, functional addressing, and train control based on wireless communications. In this paper, we present functional and performance railway communications requirements that are based on European wireless railway communications systems. In addition, we measured communications characteristics and performance using a KTX field test on the Gangneung line to analyze the validity and reliability of the LTE-R network. Although the average Radio Frequency (RF) conditions were satisfied in the requirements, we found sudden communications quality degradation, such as Radio Link Failure (RLF) in some railway sections. We propose a way to improve performance and network installations based on in-depth analysis of LTE-R communications field-test results.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.568-576
• /
• 2015

In this study, scenarios based on the leakage of highly compressed air and fire occurrence turned out to be high risks in an operation stage of CAES facility were constructed and estimated. By combining Bernoulli equation with momentum equation, an expression to calculate an impact force of a jet flow of compressed air was derived. An impact force was found to be proportional to the square of diameter of fracture and the pressure of compressed air. Four types of fire scenarios were composed to evaluate an effects that seasonal change and location of fire source have on the spread behavior of smoke. Smoke from the fire ignited in the vicinity of CAES opening descended more quickly below the limit line of breathing than one from the fire occurred 10 m away from CAES opening, which is expected to occur due to a propagation of wave front of smoke. It was shown that a rate of smoke spread of the winter fire is faster than one of the summer fire and smoke from the winter fire spreads farther than one of the summer fire, which are dependent on the direction of air flow into access opening. Evacuation simulation indicated that the required safe evacuation time(RSET) of the summer and winter fires are 262, 670 s each.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.2
• /
• pp.77-83
• /
• 2006

Ultrasonic nonlinearity has been considered as a solution for the detection of microcracks or interfacial delamination in a layered structure. The distinguished phenomenon in nonlinear ultrasonics is the generation of higher-order harmonic waves during the propagation. Therefore, in order to quantify the nonlinearity, the conventional method measures a parameter defined as the amplitude ratio of a second-order harmonic component and a fundamental frequency component included in the propagated ultrasonic wave signal. However, its application In field inspection is not easy at the present stage because no standard methodology has yet been made to accurately estimate this parameter. Thus, the aim of this paper is to propose an advanced signal processing technique for the precise estimation of a nonlinear ultrasonic parameter, which is based on power spectral and bispectral analysis. The method of estimating power spectrum and bispectrum of the pulse-like ultrasonic wave signal used in the commercial SAM (scanning acoustic microscopy) equipment is especially considered in this study The usefulness of the proposed method Is confirmed by experiments for a Newton ring with a continuous air gap between two glasses and a real semiconductor sample with local delaminations. The results show that the nonlinear parameter obtained tv the proposed method had a good correlation with the delamination.

• Journal of Technology Innovation
• /
• v.19 no.2
• /
• pp.153-184
• /
• 2011

This paper investigates what kind of technological partner firms want to cooperate with in terms of partner location. Two geographical factors are considered. One is geographical proximity, given the tradeoff between the effectiveness of knowledge spillovers in proximity and diverse knowledge absorption from geographically distant partners. The other is how many other firms are co-located with potential partners because it is known that clustering regions can create more technological outputs. Analysis on 2008 Korea Innovation Survey data finds that partner proximity is the single most important factor in choosing a cooperation partner. While firms that are located in a region crowded with related industries prefer proximate partners, others that are surrounded by unrelated industries are more likely to cooperate with distant partners. The findings suggest that geographical proximity matters in partner selection because it not only stimulates knowledge spillovers but also reduces costs involving R&D cooperation such as monitoring costs and information costs. Moreover, firms take into consideration both the benefits and risks of clustering regions. If there are so many unrelated firms that they create agglomeration diseconomies such as congestion costs and unintentional knowledge leakages, firms are more likely to try to find their cooperation partners in other regions.

• Proceedings of the KGS Conference
• /
• 2002.05a
• /
• pp.120-123
• /
• 2002

본 연구는 농천어메니티의 개념을 토대로 농촌주민과 도시민의 가치라고 할 수 있는 정주기능으로서의 생활자원화와 방문가치로서의 관광자원화로 구분하고, 이를 토대로 도시민과 농촌주민, 전문가들을 대상으로 농촌자원의 중요도와 순위적 관계를 분석하였다. 구체적인 연구결과를 살펴보면 다음과 같다. 첫째, 농촌자원을 자연적 자원과 문화적 자원, 사회적 자원으로 구분하여 37개 자원을 설정하였다. 이러한 농촌자원은 농촌어메니티를 형성하거나 형성에 영향을 미치는 대상이라고 볼 수 있다. 둘째, 이러한 농촌자원은 농촌주민과 도시민이 지닌 가치에 기초하여 생활자원적 가치와 관광가치적 가치를 동시에 혹은 차등적으로 지닐 수 있다. 이러한 관점은 농촌자원에 대한 중요도 평균에 대한 차이검증(t-test)을 수행한 결과 전체 자원의 56.8%에 해당하는 21개가 유의미한 차이를 보인 결과에 의해 지지를 받는다. 셋째, 농촌자원에 대한 순위적 상관관계분석에서도 전문가와 전체집단에서 생활자원과 관광자원에 대한 순위상관관계가 의미가 없는 것으로 나타나 위의 두번째 결과를 지지하고 있다. 이러한 결과는 농촌자원의 개발 방향과 가치부여가 자원의 속성에 따라 차등적으로 진행되어져야 함을 보여준다. 다섯째, 농촌자원의 유형을 생활자원화와 관광자원화에 대한 중요도의 표준화 점수에 기초하여 4개 유형(유형 I~IV)으로 구분하였다. 이러한 유형별 자원중요도를 고려하여 농촌마을의 개발목적에 비추어 생활자원형이나 관광자원형과의 연계를 통해 마을의 정체성과 특성화에 기여할 수 있도록 해야 할 것이다.(요약 및 결론에서 발췌)를 고지도와 지리지.읍지를 통하여 살펴봄으로써 변한 것과 변하지 않는 것을 분석하여 시대상의 복원과 지역사회의 정체성 확립에 일조하고자 한다.곡물의 여러 줄기가 합수하고 물이 역류하지 않으며 잘 감아도는 곳으로 표현할 수 있다 이러한 명당의 기본적인 원리는 장풍(藏風)과 득수득파(得水得破)이다. 장풍과 득수란 '국'(局), 즉 산줄기와 수계로 이루어진 일정한 범위 속에 만물이 생태계 속에서 살아가는 모습인 '체형(體形)'의 의미가 나타나야 한다는 것이다. 그러나 이러한 의미는 시대에 따라 달라질 수 있는 것이다.면적의 52%를 점유하여 감자 재배지의 핵심지를 이룬다. 4. 한국 감자 재배지역 중심지의 지리적 특징은, 높은 산지지역의 산록완사면에 밭작물로 재배된다는 점과 교통이 불편한 지역으로서 도시화와 산업화 지역의 그늘 지역이 대부분이다. 강원도의 감자 재배지는 감자재배에 적합한 자연환경과 화전농업의 전통, 감자 재배기술의 전파, 중앙정부와 지방정부가 지원하는 각종 연구소 분포와 영농지도, 씨감자 생산과 협동조합의 판로 개척, 도로 개설과 포장 등의 인문지리적 요인이 영농조건을 개선하고 감자 판매를 위한 시장접근을 용이하게 하여, 남한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.87-93
• /
• 2014

If one identifies the detailed distribution of pressure and axial velocity at a source plane, the position and strength of major noise sources can be known, and the propagation characteristics in axial direction can be well understood to be used for the low noise design. Conventional techniques are usually limited in considering the constant source characteristics specified on the whole source surface; then, the source activity cannot be known in detail. In this work, a method to estimate the pressure and velocity field distribution on the source surface with high spatial resolution is studied. The matrix formulation including the evanescent modes is given, and the nearfield measurement method is proposed. Validation experiment is conducted on a wide duct system, at which a part of the source plane is excited by an acoustic driver in the absence of airflow. Increasing the number of evanescent modes, the prediction of pressure spectrum becomes further precise, and it has less than -25 dB error with 26 converged evanescent modes within the Helmholtz number range of interest. By using the converged modal amplitudes, the source parameter distribution is restored, and the position of the driver is clearly identified at kR = 1. By applying the regularization technique to the restored result, the unphysical minor peaks at the source plane can be effectively suppressed with the filtering of the over-estimated pure radial modes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.79-88
• /
• 2008

In this study electromagnetic fields near electric power lines were derived by dipole antenna theory and electromagnetic fields near 3 phase power lines with vertical configurations were formulated and could be computed easily using these formula. It seems that those formula could be applicable to the consideration of electromagnetic fields during the design of transmission and distribution lines. Those formulated equations on elements of electromagnetic fields were applied to the model of a transmission-line system and were calculated by Matlab programs. The calculation results are follows. For variation of horizontal distance profiles of $E_y$ and $B_z$ are same each other, and also those of $B_y$ and $E_z$ are same each other. This means that coupled elements of E and B are perpendicular each other and have the propagation direction of the right-hand system such as $x{\rightarrow}E_y{\rightarrow}B_z$. Resultant electric field E is dominated by the element $E_y$ and resultant magnetic field B is dominated by the element $B_z$.