• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.195-209
• /
• 2016

The understanding of geometric complexity of strike-slip Fault system can be an important factor to control fault reactivation and surface rupture propagation under the regional stress regime. The Kumamoto earthquake was caused by dextral reactivation of the Futagawa-Hinagu Fault system under the E-W maximum horizontal principal stress. The earthquakes are a set of earthquakes, including a foreshock earthquake with a magnitude 6.2 at the northern tip of the Hinagu Fault on April 14, 2016 and a magnitude 7.0 mainshock which generated at the intersection of the two faults on April 16, 2016. The hypocenters of the main shock and aftershocks have moved toward NE direction along the Futagawa Fault and terminated at Mt. Aso area. The intersection of the two faults has a similar configuration of ${\lambda}$-fault. The geometries and kinematics, of these faults were comparable to the Yansan-Ulsan Fault system in SE Korea. But slip rate is little different. The results of age dating show that the Quaternary faults distributed along the northern segment of the Yangsan Fault and the Ulsan Fault are younger than those along the southern segment of the Yansan Fault. This result is well consistent with the previous study with Column stress model. Thus, the seismic activity along the middle and northern segment of the Yangsan Fault and the Ulsan Fault might be relatively active compared with that of the southern segment of the Yangsan Fault. Therefore, more detailed seismic hazard and paleoseismic studies should be carried out in this area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4B
• /
• pp.243-251
• /
• 2012

To investigate the characteristics of rip current occurring at Haeundae beach, observations obtained from a buoy and a CCTV were analyzed and numerical experiments were conducted. During observed rip-current events, the CCTV images showed that a couple of wave-trains, which are close to regular waves with slightly different directions, propagated to the beach, and wavelet analyses of data from the buoy showed very narrow-banded spectra with a peak frequency. From the evidences, it was inferred that a known mechanism of generating rip current due to the nodal line area of honeycomb-patterned wave crest was one of the significant factors of rip current occurrences of Haeundae beach. The mechanism has been explained by the following: When two wave-trains with slightly different directions propagate to a beach, wave crests of the incident wave-trains form honeycomb pattern due to nonlinear interaction. The nodal lines of honeycomb pattern are developed in the cross-shore direction. And longshore currents flow toward the nodal line area which has very low wave energy. Consequently their mass flux is expelled through the area toward the sea direction. To confirm the generation, numerical experiments were performed using a nonlinear Boussinesq equation model. In the cases with two incident wave-trains with slightly different directions and with a monochromatic wave propagating over a submerged shoal, it was seen that the honeycomb pattern of wave crests was well developed, and thus rip currents were evolved along the nodal lines.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.274-281
• /
• 2011

We analysed ground motions form Mw 4.3 earthquake around Backryoung Island for the seismic source focal mechanism and horizontal response spectrum. Focal mechanism of the Backryoung Islands area was compared to existing principal stress orientation of the Korean Peninsula and horizontal response spectrum was also compared to those of the US NRC Regulatory Guide (1.60) and the Korean National Building Code. The ground motions of 3 stations, including vertical, radial, and tangential components for each station, were used for grid search method of moment tensor seismic source. The principal stress orientation from this study, ENE-WSW, is consistent fairly well with that of the Korean Peninsula. The horizontal response spectrum using 30 observed ground motions analysed and then were compared to both the seismic design response spectra (Reg Guide 1.60), applied to the domestic nuclear power plants, and the Korean Standard Design Response Spectrum for general structures and buildings (1997). Response spectrum of 30 horizontal ground motions were used for normalization with respect to the peak acceleration value of each ground motion. The results showed that the horizontal response spectrum revealed higher values for frequency bands above 3 Hz than Reg. Guide (1.60). The results were also compared to the Korean Standard Response Spectrum for the 3 different soil types and showed that the vertical response spectra revealed higher values for the frequency bands below 0.8 second than the Korean Standard Response Spectrum (SD soil condition). However, through the qualitative improvements and quantitative enhancement of the observed ground motions, the conservation of horizontal seismic design response spectrum should be considered more significantly for the higher frequency bands.

• Clinical and Experimental Pediatrics
• /
• v.49 no.7
• /
• pp.751-756
• /
• 2006

Purpose : Our goals were to determine the frequency of headaches and backaches occurring as a side effect following lumbar puncture in children, and to investigate various factors that might influence the frequency of headaches and backaches. Methods : From October 2004 to February 2006, we enrolled 148 patients aged 2 to 15 years who received diagnostic lumbar puncture at the Presbyterian Medical Center, Chonju, Korea. Patient data were collected for age, sex, number of puncture attempts, volume of cerebrospinal fluid(CSF), bevel orientation of puncture needle, cell count in CSF, periods of absolute bed rest, and the frequency and duration of headaches and backaches. Results : Headaches occurred in 8 patients and backaches occurred in 40 patients. Headaches were found both to occur significantly more frequently in patients over age 10 and to last longer when the bevel orientation of the puncture needle was inserted toward the cranium rather than laterally. Backaches lasted longer in males than in females. The other factors evaluated showed no relationship at all to the frequency and duration of headaches and backaches. Conclusion : Following lumbar puncture, headaches were common in patients over age 10, and lasted longer when the bevel orientation was toward the cranium. Backaches lasted longer in males than in females. In light of these findings, we recommend taking special care when performing lumbar puncture for CSF examination in patients over age 10.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.334.1-334.1
• /
• 2016

다른 재료에 비해 에너지 변환 효율의 관점에서 높은 경쟁력을 가진 결정질 실리콘은 지난 수십 년 동안 그 특성이 태양전지 분야에 널리 이용되어 왔다. 하지만 결정질 실리콘 웨이퍼는 일반적으로 제조 단계에서 많은 양의 에너지를 소비하고 절단 단계에서 절단 손실(Kerf-loss)이 발생된다. Epoxy Resin을 이용한 Kerf-less Wafering은 초박형 실리콘 웨이퍼 제조 기술 중 하나로, 비교적 간단한 장비와 공정을 통하여 절단 손실 없이 $50{\mu}m$이하의 초박형 실리콘 웨이퍼를 얻을 수 있는 기술이다. 실리콘과 Epoxy Resin 간의 열팽창 계수 차이를 이용하여 초박형 실리콘을 박리 시키는 기술로, 실리콘 기판 위에 Epoxy Resin으로 stress inducing layer를 올려 공정을 진행한다. stress inducing layer를 경화시키는 열처리가 끝나고 급냉되는 과정에서 stress inducing layer에 의해 실리콘 기판에 큰 응력이 가해지게 되고 실리콘 기판에 crack이 발생된다. 공정이 계속 됨에 따라 발생된 crack은 실리콘 표면과 평행한 방향으로 전파 되고 초박형 실리콘 layer가 실리콘 기판에서 박리 된다. 본 실험에서 중요한 공정 변수로는 stress inducing layer의 구성성분 및 두께, 열처리 온도 및 시간, cooling rate 등이 있다. 이러한 공정 변수들을 조절 하여 Epoxy Resin을 이용하여 $100{\mu}m$ 이하의 박리된 wafer를 얻을 수 있었다. 박리된 wafer의 단면과 두께를 Scanning Electron Microscopy(SEM)을 통해 관찰 하였고, 이를 통해 초박형 실리콘 박리 공정에 대한 연구를 진행하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.47-52
• /
• 2005

We present a simple idea to simulate dynamic fracture and fragmentation of a propulsion system exposed to an extreme condition, such as a fire. The system consists of energetic materials confined in a steel cylinder. The strain failure model of the confinement is a modified Johnson-Cook model with a statistical failure distribution. By using the size distribution data of the fragments from the thermal explosion tests, the failure strain distribution can be empirically obtained and then entered into the model. The simulated fracture and fragment sizes are compared with the experimental records.

• Journal of Korea Water Resources Association
• /
• v.36 no.3 s.134
• /
• pp.365-374
• /
• 2003

This is a study on application of a TVD-Mccormack scheme for the computation of one-dimensional dam-break flows. The TVD scheme not only has the ability to damp out oscillations, but also does not contain terms with adjustable parameters. Moreover, the TVD-McCormack scheme does not cause any additional difficulty when dealing with the source term of the equation and retains second-order accuracy in both space and time. In this study, by appropriately designing the limiter functions, the TVD property can be achieved, and numerical oscillations near a jump discontinuities can be eliminated or reduced. Also, this numerical scheme has less computational errors when the direction of the predictor-corrector step is in the same direction as the shock wane propagation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.801-808
• /
• 2004

In this paper, we proposed the grating parallel plate waveguide structure for converting a linearly polarized wave to a circularly polarized wave. For the design of the polarizer, the moment method and Floquet's theorem are applied under two assumptions that the incident wave is a plane wave and the structure is infinitely periodic. In order for the more precise design, we performed the near-field analysis for the finite polarizer structure using MATLAB. By comparing with the measured results obtained by the near-field arrangement, we verified the correctness of our near-field analysis. By taking the ideal assumptions considered in the initial design procedure into account, newly designed modified dimensions for the polarizer was suggested which give improved performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.105-114
• /
• 1993

The ciculation due to bottom density current produced by a dense inflow into a small reservoir is analysed by numerical scheme. Before the front of the density current arrives at the downstream end, the mixing in the reservoir is mainly caused by the anticlockwise vortex formed at the downstream of plunging point along the movement of bottom density current. Upon the arrival of the front of the density current at the downstream end an internal surge is created through an internal hydraulic jump. With repeated propagation of the internal surge back and forth the mixing in the reservoir is progressed and the thickness of dense layer is increased upward. The dilution of the overflow at downstream end is found to depend on inflow densimetric Froude number, reservoir length and elapsed time. The time required for the overflow to attain a specified dilution increases as reservoir length increases and Fre decreases.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1476-1481
• /
• 2007

Numerical investigation on radiation characteristics of discrete frequency noise from asymmetry aero-intakes was carried out. The near-field predictions were obtained by solving the linearized Euler equations with computational aeroacoustic techniques consisting of high order finite difference scheme, non-reflecting boundary conditions, oversetgrid techniques. For the prediction of far-field directivity pattern, the Kirchhoff integral method was applied. By comparing the directivities of noise radiating from the scarf and the scoop aero-intakes with that from an axisymmetric aero-intake, it is shown that noise reduction at downward peak radiation angle can be achieved. The scattering of the radiating acoustic wave by background mean flow shifts the peak lobe radiation angle toward ground and increases the amplitude of the acoustic pressure compared with the cases without mean flow effect.