This study focuses on the implementation of C-band radio navigation in the 5.03 ~ 5.15 GHz terrestrial band to cooperate with GNSS navigation mainly used in existing UAMs. This is one of the navigation technologies that can fully satisfy the requirements of Title 14 of CFR-135.165. According to the FAA, the use of two or more independent navigation sources for aircraft is proposed for aircraft. This study proceeded with the link budget derivation through radio wave propagation path loss analysis, and antenna shape design for miniaturized Doppler VOR, and DME design with enhanced positional distance resolution compared to conventional aircraft. The ground navigation system which is the result of this study, consists of a VOR/DME ground station and a terminal that can be mounted on UAM. Significant performance was confirmed through the production and testing of each prototype.
Park, Jae-Sun;Lim, Sang-Boem;Pyeon, Mu-Wook;Hong, Tae-Min;Lee, Byoung-Kil
Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
/
v.27
no.4
/
pp.505-513
/
2009
Recently, researches on the construction information for construction of high-tech cities are under performed. RTLS(Real-Time location system) for gathering the dynamic location information of construction resources in construction sites, such as workers, materials and equipments, is one of the developments. Especially, construction resources can be managed efficiently with the dynamic location information and the improvement of safety and the reduction of cost are expected. To introduce the RTLS to the construction sites, the installation location of AP(Access Point) must be simulated using the 3-dimensional visibility analysis considering the propagation distance of AP. In this research, 3-dimensional signal simulation software based on the spatial data using surveying terrestrial LiDAR is developed. The simulated results are compared with the signal strength of field experiments for 4 test sites. As a result, the signal strength from the propagation model is most similar to that of field experiment at the front of the main building and the maul playground of Konkuk University. The visibilities in that sites are higher than other sites. among 4 test sites.
Proceedings of the Korea Water Resources Association Conference
/
2011.05a
/
pp.40-41
/
2011
동해를 전파하는 지진해일은 세계적으로 다른 지역에서 발생하는 지진해일과 비교하였을 때 상대적으로 파장이 짧고, 이에 비해 먼 거리를 전파한다. 그러므로 동해에서 발생한 지진해일의 전파에 대한 해석을 수행할 때 물리적인 분산효과가 매우 중요하다. 따라서 지배방정식으로 분산 효과가 충분히 고려된 선형 Boussinesq 방정식을 사용한다. 기존의 연구에서는 leap-frog 기법을 사용하여 선형 천수방정식을 차분할 때 발생하는 수치분산항에 분산 보정계수를 이용하여 선형 Boussinesq 방정식의 물리적 분산항과 같은 형태로 나타나도록 유도하여 수치모의를 수행하였다. 그러나 기존에 사용한 지배방정식은 수심이 일정하다는 가정을 통하여 유도된 것으로, 수심에 변화가 있는 실제 지형을 통과하는 지진해일에 대한 수치모의를 수행한 결과의 정확도에 문제가 생길 수 있다. 본 연구에서는 기존의 연구에서 발생할 수 있는 수심 변화에 따른 오류를 개선하기 위하여 바닥 지형이 1차원으로 변한다는 가정을 이용하여 지배방정식을 유도하였으며, 이로 인해 발생하는 수심 변화가 고려된 항을 기존의 분산보정기법에 추가하였다. 그리고 적용성을 높이기 위하여 수치모의 기법의 제한을 최소화하는 연구를 진행하였다. 본 연구에서 제안한 수정 기법이 수심이 변화하는 지형을 전파하는 지진해일 수치모의 과정에서 경사에 대한 분산효과가 충분히 고려되는지 확인하기 위하여 Gaussian hump를 이용한 가상 지진해일을 원형 천퇴 지형에 통과시켰다. 본 연구에서 사용한 지형을 통과하는 Gaussian hump에 대한 해석해를 구하는 방법이 존재하지 않으므로, Boussinesq 방정식을 직접 차분하여 푸는 FUNWAVE를 사용하여 동일한 조건 하에서 수치모의를 수행하였다. 비교 결과를 통하여 본 연구에서 제안한 기법의 정확도 향상을 확인하게 되면, 실제 지형을 통과하는 지진해일의 수치모의에 대한 활용성을 높일 수 있을 것이다.
Journal of the Korea Institute of Information and Communication Engineering
/
v.17
no.7
/
pp.1558-1563
/
2013
In this paper, we analyze the radio propagation path loss characteristics for the vertical electric dipole radiation over the perfect electric conductor(PEC) ground plane. Most research have been performed about the electromagnetic analysis of vertical electric dipole in free space for time domain or frequency domain. But this paper present the radio propagation path loss over PEC ground plane in time domain under the assumption of the vertical electric dipole as a base station. From the simulated results, the ground plane effect can change the location of near field from transmitting antenna and the transient responses at mobile are calculated. The results of this paper can be applied to surface radar or signal processing applications.
Polyethylene pipes has useful benefits which are anti-corrosive and flexible material, so it is used to gas pipes but also class 3 water pipes of nuclear power plant, process pipes of petrochemical plant and chemical plant. So the usage of polyethylene pipes is widely increased. But it has been limited for the usage of polyethylene, because it can not be directly detected to fusion joints by using non destructive evaluation. Polyethylene pipes are connected by two methods, one is butt fusion and the other is electrofusion. Butt fusion is widely used to connecting the pipes. It is proposed to method for determining the reliability of joints in this study that is detection of the melt flow zone at fusion joints. In this study, middle density polyethylene is used, outside diameter of the test specimen is 225mm and thickness is 20.5mm. Speed of ultrasonic of this test specimen is 2,200m/s. Test specimens were fabricated by varying the heating time which means from 0% to 130% applying time through heating plate to polyethylene for detecting melt flow zone. Also 4 additional test specimens were made, one was made that not scrapping attached surface of pipes but applying 100% of the proper heating time and the others were made to include of soil, gravel and vinly tape paper at fusion joints, that were also applied 100% of proper heating time. Ultrasonic testing to measure the melt flow zone of 20 test specimens was conducted by using 3.5MHz and 5.0MHz ultrasonic probes and melt flow zone measuring was conducted to three times at different point to one specimen. To differentiate the melt flow zone signal, post image processing was equally conducted to all test results and image levels, contrast, sharpen, threshold were adopted to all teat results and the test results were displayed gray scale. From the results, for the shorter heating times the reflection area of multiple echo have been increased, so the data was obtained from the position where it can be eliminated as much as possible. At 80% of proper heating time(168 sec.), the signal of melt flow zone was obtained clearly, so measuring could be conducted. From 7% of proper heating time(15 sec.) to shorter heating times. we could not obtain the signal because test specimen was not fused. From the result, we can verify that measuring of melt flow zone by using phased array ultrasonic imaging method is possible. And we can verify to complete and incomplete butt fusion by measuring the melt flow zone.
본 논문에서는 X-band GB-SAR 시스템을 이용하여 지상을 모니터링 하였으며, 대기 중의 습도와 거리의 영향을 받는 대기보정 상수를 산출하였다. 시스템에서 X-band 안테나는 중심주파수 9.65 GHz, 밴드 폭 600 MHz이며, 신호의 증폭과 다편파 측정 및 분석을 위해 각각 마이크로파 앰프와 마이크로파 스위치를 이용하였다. Azimuth step과 length는 5 cm와 5 m로 최대 관측 거리는 약 200 m 이다. phase 분석에 쓰인 산란체는 총 5개의 trihedral corner reflector로서, 시스템으로부터의 거리를 각각 다르게 설정하였다. 실험은 3일간 연속적으로 수행되었으며, 실험간 상대습도는 최소 50 %에서 최대 90 %까지로 약 40 %의 변화를 보였다. 고정된 상태의 reflector는 마치 이동한 것과 같은 현상을 보였는데 이는 마이크로화의 전파과정에서 발생하는 거리와 습도에 따른 지연효과라고 판단하였으며, 이를 배제하기 위하여 대기보정식을 산출하였다. 산출과정에서 temporal coherence가 0.98 이하인 reflector의 신호는 제외하였는데 이 경우 시스템 및 reflector의 안정성에 문제가 있다고 판단하였기 때문이다. 산출된 대기보정식은 C-band 안테나를 사용한 실험과 비교하여 보았다.
Proceedings of the Korea Water Resources Association Conference
/
2005.05b
/
pp.527-531
/
2005
지진해일파는 풍파에 비해 파장이 매우 길어 장파로 간주되지만 조석에 비하면 파장이 짧아 상대적으로 분산성이 강하므로, 먼거리를 전파하는 경우에는 분산성을 고려하여 해석하여야 한다. 특히 동해에서 발생하는 지진해일의 경우 파원이 작고 수심이 깊어 단주기파 성분이 강하므로 그 물리적인 분산효과가 매우 중요하다. 이에 본 연구에서는 지진해일 수치모의시 임의로 구성된 유한요소망과 양해법을 사용하면서도 복잡한 Boussinesq 방정식 대신 간단한 Boussinesq-type의 파동방정식을 사용하면서도 물리적 분산효과를 정도 높게 고려할 수 있는 능동적인 분산보정기법을 이용한 2차원 유한요소모형을 개발하여 가상진원에 의해 발생된 2차원 지진해일 전파에 대하여 수치모의한 결과, 요소크기와 시간간격이 고정되었음에도 불구하고 다양한 수심에 대해 선형 Boussinesq 방정식의 해석해와 매우 잘 일치하는 좋은 결과를 보였다.
Proceedings of the Korean Society of Broadcast Engineers Conference
/
2010.07a
/
pp.337-340
/
2010
본 논문은 H.264/AVC를 이용한 근접 무손실 화면내 부호화에서 기존의 라인 기반 예측 방법에서 발생할 수 있는 오류 전파 문제를 해결하기 위한 방법을 제안한다. H.264/AVC의 화면내 예측 부호화는 주변 블록의 복원 화소들을 현재 부호화하려는 블록의 예측값으로 사용하여 공간적 상관성을 제거하고 부호화 효율을 향상시킨다. 기존의 라인 기반 예측 방법에서는 일반적으로 화소 간 거리가 멀어질수록 화소 간 상관성이 떨어지므로 라인 단위로 예측을 수행하여 예측의 정확도를 높였다. 하지만, 이 경우 오류 전파 문제에 취약하다는 단점이 있다. 본 논문에서는 화면내 $16{\times}16$ 수직 및 수평 예측 모드에 대해 매크로블록을 라인 단위로 예측하면서 정해진 서브 블록마다 참조 화소를 업데이트하는 방법을 제안한다. 따라서, 라인 기반 예측 방법의 예측 정확도는 유지하면서 오류 전파 문제를 예방할 수 있다. 실험을 통해, 제안하는 방법이 High 프로파일에서 H.264/AVC 표준 소프트웨어 JM 12.2에 비해 평균 약 5.8%의 비트율을 감소시킬 수 있음을 보였다.
Journal of the Korean Institute of Telematics and Electronics
/
v.8
no.4
/
pp.17-24
/
1971
Laser light which modulated and transmitted through one-meter water bath and one-kilometer transmission distances in atmospheric media is detected by method of direct photo-detection. Also, it is analyzed as a square law detection and the experimental apparatus are designed and constructed. Consequently, in spite that the quantitative analysis remains, the availability of coherent optical communication is understood. The average attenuation with the conditions of weather is about -25dB, and the average attenuation coefficient of water is about 0.4(m-1).
Proceedings of the Korean Society for Noise and Vibration Engineering Conference
/
1992.10a
/
pp.36-41
/
1992
철도주변의 쾌적한 생활환경을 유지하기 위해서는 철도차량이나 선로에서 발생하는 공기전파음과 지반을 통하여 전파되는 지반진동을 일정수준 이하 로 제어할 필요가 있으며 이러한 철도 소음진동 대책에는 기존철도에 대한 기초적인 소음진동 크기 및 특성에 대한 자료가 필요하다. 국내에서는 이제 까지 철도소음진동에 대한 특별한 자료수집이나 대책에 큰 관심을 기울여 오지 않고 단지 철로주변에서는 어쩔수 없이 철도소음진동의 피해를 감수할 수 밖에 없다는 소극적인 태도를 취해왔으며 최근에 들어서야 환경의식 증 가로 철로변 거주자들의 민원에 대한 대책으로서 일부 구간에서 방음벽을 설치하고 있는 실정이다. 더우기 경부고속철도 건설이 이미 시작된 현시점에 서 철도 소음진동 실태나 기준등이 정립되어 있지 못하여 추후 철도주변의 소음진동문제를 어떻게 대책을 수립해 나가야 할지에 대한 기본적인 자료수 집 및 관련연구가 필요할 것으로 생각된다. 본 연구에서는 이러한 상황에서 기존 철도의 소음진동 시간 변동특성, 거리감쇠특성, 주파수특성 및 철도진 동의 진동방향 특성을 측정 분석하여 추후 철도소음진동 관련 대책이나 기 준수립에 기초자료로 제시하고자 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.