• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.1
• /
• pp.45-48
• /
• 2016

The treatment of obesity have been developed various devices for the treatment of obesity, the ultrasound is to be made after the state changes to become easy fat decomposition by heat and vibrations to facilitate the flow of blood and lymph fatty acid released into the blood. There is such ultrasonic transducer array is used in obesity therapy focusing angle of the transducer array and the frequency may have a significant impact on the degradation of fat. In this paper, we set the frequency that reaches the shortest time to a set temperature 27kHz, 1MHz, by applying a transducer with a diameter of 5mm, 10mm, 16mm for the frequency of 3MHz, obtain the wavelength and near the stomach in order to set the frequency of the transducer array, which was set to the focusing angle of the transducer with three contact surfaces. As a result, the time to reach the set temperature was short days when 3MHz frequency, the focusing angle is titrated is $40^{\circ}$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.17-24
• /
• 2003

In this paper, a high efficiency leakage transformer for neon tube is developed to improve its power factor, to reduce its core loss and weight by using a technique of shape optimization and grain direction of non-oriented silicon steel strip. A protection circuit is designed for all types of neon transformer loaded with one or more neon tubes. Whenever the neon tube fails to be started up or comes to the life end, or encounters faults with open-circuits at the output terminals of the neon transformer, the electronic type protection circuit will be initiated to avoid more critical hazards. These neon transformers need a electronic type protection circuit to prevent from current stresses on circuit components by neon tube fail. The input of the transformer is automatically cut on when the abnormal condition occurs, preventing waste of no-load power.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.3
• /
• pp.27-32
• /
• 2008

Bone is a self-assembly material. It is known that the low amplitude and high frequency mechanical stimulus, which is much less amplitude but higher frequency than those induced by the normal activity, can induce new bone formation. The vibrating resonance is employed to elucidate why new bone is formed by this kind of mechanical stimulus. For example, as 30 Hz and $5{\mu}{\epsilon}$ mechanical stimulus is applied at the wall of canaliculus (the tiny tube type pathway of bone fluid flow and the diameter of canaliculus is less than 200nm), the osteocytic cell membrane experiences $1,000{\mu}{\epsilon}$ strain due to the vibrating resonance. Two experiments will follow after this pilot study; (1) observing the MAPK pathway of osteocytes by using in-vitro cell culture and (2) visualizing the actin filament network in the osteocytes by using the imaging technique, such as confocal laser scanning microscope.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.535-544
• /
• 2017

In this paper, to overcome the limitation of information transmission and reception according to the RF system of UAV, it is necessary to check the position of many UAVs in flight on the basis of mobile communication and to make the LTE modem lightweight and low power And UAVs that are in operation are received and controlled. Through this study, we proposed a method to control real-time location tracking by connecting high-resolution images to the network anytime and anywhere. For this purpose, we propose the requirements and requirements of LTE modem using real-time high-speed data communication technology (3G, 4G LTE, Bluetooth) by presenting the communication module system of LTE-based UAV. N:N control system concept and implementation technology(Control system structure, control data flow chart, flight planning and transmission, real-time location tracking).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.415-429
• /
• 2011

In this study, a single-phase quasi Z-source AC-AC converters with a series connection of the output terminals is proposed. The proposed system has configuration that the input terminals of two quasi Z-source AC-AC converters are connected in parallel and its output terminals are connected in series. The out of phase mode and in phase mode of the proposed system are presented. To verify the validity of the proposed converter, a DSP controlled hardware was made and PSIM simulation was executed. As a result, controlling the duty ratio of the converter, the desired buck-boost output voltages could be generated. For each modes, as compared with the single converter operation, the proposed converter could enhance the efficiency and input power factor according to different loads. Also, in case of the out of phase mode under the constant load, the efficiency and input power factor of the proposed system are increased 10[%], 35[%] respectively in compared with the single converter. And, the output voltage is constantly controlled in dynamic state in case while the load is suddenly changed.

• Convergence Security Journal
• /
• v.18 no.5_1
• /
• pp.67-73
• /
• 2018

From a software engineering point of view, tracing is a special form of logging that records program execution information. Tracers using dedicated hardware are often used because of the characteristics of tracers that need to generate and decode huge amounts of data in real time. Intel(R) PT uses proprietary hardware to record all information about software execution on each hardware thread. When the software execution is completed, the PT can process the trace data of the software and reconstruct the correct program flow. The hardware trace program can be integrated into the operating system, but in the case of the window system, the integration is not tight due to problems such as the kernel opening. Also, it is possible to trace only a single process and not provide a way to trace multiple process streams. In this paper, we propose a method to extend existing PT trace program to support multi - process stream traceability in Windows environment in order to overcome these disadvantages.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1155-1160
• /
• 2018

Presently in 2018, the security market is requiring progressive development and innovation in the area of security on account of new changes and technologies. This means the rapid and prompt development of the service platforms and service-based information systems. Here, this study is going to examine the process of operating a number of services and obtaining security, not the criteria for selecting particular service in online environment where the various services exist. Within a series of flows to protect the manager's authority about the platforms operated by information systems, and to provide and destroy services, this author limits the entire service platforms of the optimized balance module into four categories maximum for the security of the area apt for illegal invasion and access, and the proper area. Also, about the area with limited security, this researcher again applies subordinate security policy and technology respectively. This author here will suggest a method to provide and to extend safety and security for the information system and also propose the process of applying it as well.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.13-27
• /
• 2019

While temporary construction work applies to a temporary facility, it has a high use frequency during the construction period accounting for around 10% of the construction cost, it requires systematic management. However, construction inspection information of temporary construction work often has no special specification in the design documents and specification items, with the items on various standards also being formidable. Because of this, related inspection are likely to be performed inefficiently with a high probability for occurrence of human errors when quality inspection is conducted for the temporary construction work. In the present study, therefore, apply to the electronic operation support system capable of supporting implementation of inspection of providing related information for the contemporary construction work. To achieve this, a prototype is developed by using IDEF0 to identify information flow by process and organizing EPSS-based quality inspection Task. And then, efficiency of the quality inspection and information accessibility for temporary construction work are to be improved by verification method of Sample Project.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.645-650
• /
• 2018

Software stability is the possibility of operating without any malfunction in the operating environment over time. In a finite failure NHPP for software failure analysis, the failure occurrence rate may be constant, monotonically increasing, or monotonically decreasing. In this study, based on the NHPP model and based on the software failure time data, we compared and analyzed the attributes of the software development cost model using the exponential distribution Rayleigh distribution and inverse exponential distribution considering the shape parameter of the Weibull distribution as the life distribution. The results of this study show that the Rayleigh model is the fastest release time and has the economic cost compared to the inverse-exponential model and the Goel-Okumoto model. Using the results of this study, it can be expected that software developers and operators will be able to predict the optimal release time and economic development cost.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.43-48
• /
• 2019

The presence of shops necessary for everyday life is a factor that increases the satisfaction of residential environment. From the perspective of founders, establishing businesses with high needs of local residents is a factor that affects business success. In this paper, we try to find out the status of businesses closely related to everyday city life. And it analyzes whether the formation of these businesses is consistent with the initial consumer needs of the new city. The purpose of this paper is to derive meaningful results that both the business founder and consumer can win-win. The current status of the life-friendly businesses and the needs of citizens were analyzed in the S city. As a results of analysis, the needs for education appears strongly at the early stage of urban development. And it shows a characteristic of being weakened to some extent with the passage of time. On the other hand, the needs for food, which is the basic requirement of life, has a low starting and steadily increasing character.