• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.317-324
• /
• 2004

Electromagnetically coupled coaxial dipole (ECCD) array antenna with and without short-ended termination is investigated theoretically. The integral equations are derived for the structure by use of the Fourier transform and mode expansion of radial waveguide. The integrals appearing in the integral equations are evaluated along the branch cut instead of real axis for a faster convergent integral. The effects of slots and dipoles, short-ended termination length, and dielectric coating on the radiation characteristics are presented. Radiation pattern of the structure is also investigated. The results of the present method are compared with those of the commercial EM simulator and good agreement is found.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.23-28
• /
• 2015

The detection field is an important sector of the factors influencing the battle field. Basically, The radar emits a radio wave to perform the detection in the existing way. However, When most existing radars identify target by signal processing to return radio wave, Environmental attenuation factor does not reflected. The radar using this radio wave has got the possibility changing detect result depending on attenuation factor by environmental conditions, The operational problems may arise in a real battle field. Therefore, In this paper, When emitted radio waves were come back, Reflecting the environmental attenuation factor, Experimental attempts to identify the target to enable more accurately.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.159-166
• /
• 2010

As Power Line has been already installed over 60% of a residential area all over the world, Broadband Service has been possible using high-speed PLC(Power Line Communication) without new access line installed for Internet access. Because of such reason, PLC is researched as the most suitable service for Last Mile Solution. But, Power Line is designed for transmitting electric power, so peripheral Wireless Communication System is affected by a leak of electric wave. In this paper, we propose a High Performance Notch Filter algorithm in comparison with a existing notch filter for reduction of interference between existing Wireless Communication Service and Power Line Service. In addition, we implement the Notch Filter emulator appling a High Performance Notch Filter and using a embedded board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2505-2513
• /
• 1996

This paper presents the analysis of the impedance characteristic of the strip type waveguide mount backed by the dielectric substrate using mode the matching and induced EMF method. The part of the waveguide containing the dielectric substrate is modeled as waveguide partially filled with the dielectric, and a hybrid mode analysis has been conducted for the structure. The electromagnetic scattering problem by the dielectric substrate is solved by the mode matching method using the calculated modal function. The input impedance seen at the mount gap is calculated by the induced EMF method using the calculated results. the calculated results thus obtained has been verified through comparison with the results by other numerical methods. The effect of some structure parameters such as the width of the substrate and the gap size on the mount impedance is investigated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.159-164
• /
• 2005

Recently, it has demanded high-speed digital circuits as information increase. Therefore, electromagnetic characteristics of compact microwave circuit occurred importantly. And, the effect of the imperfect ground plane on the signal integrity and influence of coupling between two parallel lines for high-speed digital transmission line on the printed circuit board is investigated by FDTD simulations in 3-D electromagnetic analysis method. The results of FDTD simulation are compared with the ADS simulation in commercial software, analyzed lumped element of modeling and electromagnetic wave's radiation of slot as frequency. As a consequence, when the slot in the ground plane is under microstrip line, it has much effect on propagation of wave.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1454-1460
• /
• 1993

The scattering pattern, due to an E-Polarized wave incident on M circular parallel dielectric cylinders, is computed. The multiply-scattered fields between the cylinders are considered. Modeling of infinite cylindrical scatterer of arbitrary cross sections by a number of circular cylinders is executed. By enforcing the boundary conditions on the surface of each cylinder, an infinite set of equations is obtained. The first order of scattering results from the excitation of each cylinder by only the incident wave. The second order results from the excitation of each cylinder by the first order of scattering from the remaining cylinders, and so no to an infinite order of scattering. Although the resulting equation is of infinite size, proper truncation yields very accurate numerical results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.97-102
• /
• 2019

The GNSS(Global Navigation Satellite System) provides important information such as Position and Navigation, Timing(PNT) to various weapon systems in the military. as a result, applications that employ satellite navigation systems are increasing. therefore, a number of studies have been conducted to deceive the weapon systems that employ GNSS. GNSS spoofing denotes the transmission of counterfeit GNSS-like signals with the intention to produce a false position and time within the victim receiver. In order to deceive the victim receiver, spoofing signal should be synchronized with GNSS signal in doppler frequency and code phase, etc. In this paper, Civilian GPS L1 C/A spoofing signals have been evaluated and analyzed by SDR receiver.

• Korean Journal of Metals and Materials
• /
• v.46 no.1
• /
• pp.44-51
• /
• 2008

The effects of magnetic powder size on electromagnetic wave absorption characteristics in Fe-6.5Si-0.9Cr(wt%) alloy flakes/polymer composite sheets available for quasi-microwave band have been investigated. The composite sheet including small magnetic flakes with the size less than $26{\mu}m$ exhibited high power loss in the GHz frequency range as compared with the sheets having large alloy flakes of $45{\sim}75{\mu}m$. Moreover, both the complex permeability and the loss factor increased with the decrease in size of the alloy flakes. The large power loss of the sheets containing small magnetic flakes was attributed to the high complex permeability, especially their imaginary part. The high complex permeability of the sheets composed of small flakes was considered to be due to the highly thin shape of the flakes inducing low eddy-current loss.

• Korean Journal of Metals and Materials
• /
• v.47 no.12
• /
• pp.866-872
• /
• 2009

The effects of magnetic powder thickness on electromagnetic wave absorption characteristics in Fe-6.5Si-0.9Cr (wt%) alloy flakes/polymer composite sheets available for quasi-microwave band have been investigated. The atomized FeSiCr powders were milled by using attritor for 12, 24, and 36 h, powder thickness changed from $40{\mu}m$ to $3{\mu}m$ upon 36 h milling. The composite sheet, including thinned magnetic flakes, exhibited higher power loss in the GHz frequency range as compared with the sheets having thick flakes. Moreover, both the complex permeability and the loss factor increased with the decrease in thickness of the alloy flakes. Therefore, the enhanced power loss property of the sheets containing thin alloy flakes was attributed to the flakes of high complex permeability, especially their imaginary part. Additionally, the complex permittivity was also increased with the reduction of flake thickness, and this behavior was considered to be helpful for improvement of the electromagnetic wave absorption characteristics in the composite sheets, including thin alloy flakes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.317-317
• /
• 2012

사파이어는 우수한 광학적, 물리적, 화학적 특성을 가지고 있는 물질 중의 하나이며, 청색 발광특성을 나타내는 GaN와 격자상수, 열팽창 계수가 가장 유사할 뿐만 아니라 가격도 상대적으로 저렴하여 GaN 성장을 위한 기판으로 사용된다. 실제로 사파이어는 프로젝터와 전자파장치, 군사용 장비 등 다양한 분야에 응용되고 있으며, 발광 다이오드(LED)를 위한 기판으로 활용됨으로써 그 수요가 급격히 증가하고 있다. 그러나 사파이어 결정의 성장 중에 생길 수 있는 전위(dislocation)와 적층결함(stacking fault) 등의 결정 결함들은 결정 내에 존재하여 역학적, 전기적 성질에 큰 영향을 미칠 수 있다. 특히 사파이어가 청색 발광소자의 기판으로 사용되는 경우, 사파이어 기판 내부의 결정 결함은 증착되는 박막 특성에 영향을 미치게 된다. 따라서 사파이어의 보다 나은 응용을 위해서는 결함의 형성 메커니즘과 결정 결함의 평가기술 등에 대한 이해가 필요하고, 특히 결함의 정량적 평가 기술의 개발은 사파이어의 상용화에 중요한 핵심요소 중 하나이다. 결정 내 결함이 위치하는 부분은 분자나 원자간의 결합이 약하거나 높은 에너지 상태이므로, 결정의 표면을 적절한 산이나 염기 등을 이용하여 에칭하면 에칭반응은 결정의 전위 위치에 해당하는 부분부터 일어나 결정의 표면에 에치핏을 형성한다. 따라서 결정 표면에 나타나는 에치핏의 개수를 관찰하면 결정의 전위 밀도 파악이 비교적 간단하고, 에칭반응의 이러한 특징은 전위의 정량적 평가에 이용이 가능하다. 본 연구는 4인치 사파이어 조각기판을 수산화칼륨(KOH)으로 습식에칭 후 표면에 나타나는 에치핏의 형성거동과 이의 시간 및 온도 의존성에 관한 연구를 진행하였다. 또한 단결정의 전위밀도를 예측하기 위해 사파이어 조각시편의 단위면적당 에치핏의 개수를 파악하여 에치핏밀도(EPD, etch pid density)를 계산하였고, 값의 불확도(uncertainty)를 계산하여 전위밀도의 신뢰도를 평가하였다. 그 결과, 사파이어 조각시편의 에치핏밀도는 단위면적($cm^2$)당 약 ${\sim}10^2$개로 확인되었고, 이 값은 약 2%의 상대불확도를 가지는 것으로 나타났다.