• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.37-43
• /
• 2001

In this paper, we designed a linear power amplifier considering its delay characteristics fur wideband operation. The power amplifier has the gain of 37 dB and is designed in 3-stage typ with 1W output power. The error amplifier has the gain of 55 dB and is designed in 4-stage typ. And directional coupler and power divider are designed. Vector modulator is used to adjust magnitude and phase of signal. A linear power amplifier, that is assembled with each modules, is designed considering the delay characteristics for 2.11~2.2 GHz. Its C/I3 ratio has been improved by B5 dB for bandwidth of 30 MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.402-409
• /
• 2005

In analog and digital electronic systems, crosstalk between transmission lines on the printed circuit board can degrade the performance of equipment operations. This paper presents a technique to analyze the effects of via fence, which is based on additional transmission lines grounded by vias. The technique is composed of a circuit concept approach for transmission line sections md an impedance modeling of via hole sections. All sections are represented by ABCD parameters and they are cascaded. Finally, this technique was verified by comparing the measurement results with the simulation ones.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.87-97
• /
• 1998

This paper describes an analysis of tunable characteristic for magnetically tunable E-plane type finline filter on a ferrite substrate. The proposed design is based on using of quarter wavelength transmission line for compensating the negative length transmission line of end K-inverters of E-plane type waveguide filters and the tunable characteristics of designed filters are analyzed. The analysis results of filter and inverter structure loaded with finline on a ferrite substrate are obtained using the edge based finite element method including higher order mode effects. The X-band experimental results for bilateral and unilateral finline magnetically tunable E-plane type waveguide filters agree well with the simulated data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.16-24
• /
• 1998

In a high speed long haul fiber optic communication system using modulation, fiber chromatic dispersion and laser chirping can cause serious performance degradations. In this paper, the combined effect of laser chirping and chromatic dispersion on the per- formance of 2.5[Gbps] rate lightwave systems operating at a wavelength of 1550[nm] was investigated. Also we used an optical equalizer to compensate the laser chirping and fiber dispersion, and knew that the receiver sensitivity was improved by about 2 ~ 4[dB].

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1067-1075
• /
• 2001

The fields at the aperture of conical horn antenna with corrugations parallel to the axis have been analyzed using FDTD(Finite Difference Time Domain). Easy calculation depending on the change of the structure of antenna and time reduction can be achieved by 2-D FDTD coding with the first-order Mur ABC(absorbing boundary condition). It is confirmed that the corrugation can reduce phase difference of field on aperture. also it is investigated that the directivity is increased by 6.1 %, 12.9%, and 28.4% with one corrugation, two corrugations, three corrugations, respectively. It is also found that the improvement of the characteristics of the antenna is not proportional to the number of the corrugation but more dependent on the location of the corrugation near the aperture than that far the aperture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.47-52
• /
• 2002

It was virtually declared that measurement science must abandon the error analysis of measurement when ISO had published "Guide to Expression of uncertainty in Measurement" International inclination of measurement field in order to guarantee the traceability and confidence of measurement results discards the error concept and instead analyzes the measurement uncertainty. In this paper we establish a mathematical model of measurement and analyze all uncertainty factors as possible as for yielding the measurement uncertainty in the course of the calibration of RF multimeter using Transfer Standard, Thermal Voltage Converter We produce the expanded uncertainty by analyzing cable effects, correlation of thermocoupler and DC meter, DC source, RF source, attenuator, reflection coefficients and DUT.s and DUT.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.11-17
• /
• 2001

This paper introduces an interference analyzer based on the statistical approach called the Monte Carlo methodology, which has been chosen as one of the interference analyzing techniques in ITU-R. Furthermore, using the interference analyzer developed in this paper with modified Hata model, computer simulation is performed to examine probability of interference affecting between the base stations with FDD and TDD modes for IMT-2000. Through the simulation results, it is confirmed that two different systems with FDD/TDD modes of same frequency bands can be simultaneously used in a cell without significant interference, under the parameter conditions specified in this paper.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1376-1385
• /
• 2000

The phase characteristic of delay line in feedfarward linearizer has been changed due to variation of operating temperature. In this paper, design method of fixed phase control circuit of group delay line using adaptive vector control is derived. To maintain transfer characteristics of nominal operating temperature, the error correlated signals, which are changed adaptively due to changing of temperature, are added to main signals. The proposed method maintains transfer characteristics under 0.06dB of insertion loss and 0.36$^{\circ}$ of phase variation in case of 1-tone(880 MHz) and under 0.07 dB of insertion loss and 0.35$^{\circ}$ of phase variation in case of 2-tones(877 MHz, 882 MHz) for 10dB input power dynamic range and +/-10$^{\circ}$ phase variation respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.4
• /
• pp.399-402
• /
• 2016

We propose a thin electromagnetic wave absorber using varactor diodes combined with intentionally introduced multiple slits, which enables continuous sweep of an absorption frequency band throughout relatively wide frequencies. The absorption frequency range of conventional electrically tunable absorbers has been restricted by high capacitance of varactor diodes. In order to overcome the problem, we introduce parasitic capacitance and connect them with varactors in series, which reduces the total capacitance dramatically. As a result, we can raise the operating absorption frequency up to the X-band region. Moreover, we can also control the operating frequencies by modifying the number of slits with little change in an entire frequency sweep range. Good agreement between simulated and measured results show the validity of our proposal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.878-887
• /
• 2012

Aeronautical frequency band is to be internationally protected for aviation safety. Recently, with a rapid growth of an international air traffic, aeronautical frequency band is getting saturated, and thus may causes the interference in the congested frequency band. In this paper, an efficient aeronautical frequency allotment and management policies are proposed for resolving the existing problems in the aeronautical frequency band. The key activities include the review of the aeronautical frequency management and interference mitigation policies in a few important foreign countries such as United States and Japan. This policy study will be contributed for the future air safety in the aeronautical frequency management point of view.