• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.219-224
• /
• 2011

The quality management for mobile internet voice services currently being used widely cannot be achieved by the conventional quality management depending on a specific measurement equipment. For more systematic quality management, a real-time or preventive quality management scheme is proposed. The proposed scheme required a quality management software installed in a service user's terminal. In order to implement and realize the proposed scheme, it is a very important issue to ensure the reliability of the measurement results from the developed quality management software. Therefore, we have performed a large number of tests to verify the reliability of the software and discuss on the results in this paper.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.1
• /
• pp.55-60
• /
• 2011

The mobile internet telephony service rapidly grows according to the extending deployment of smartphones. Unlike telephony service over a conventional public switched telephone network (PSTN) or mobile network, internet telephony service cannot guarantee its service quality, which can be severer in a wireless environment. Therefore, a more strict and systematic quality management is required for successful settlement and popularization of mobile internet telephony service. Existing quality management scheme using a specific measurement equipment cannot measure all the time so that it performs late management. In order to overcome the problem, this paper develops a software that can be equipped on a user terminal and measures the service quality all the time. By using the developed software, all-time and user-activating service quality monitoring can be supported.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.3
• /
• pp.111-117
• /
• 2008

Presentation with a projector and a laser pointer is widely used in seminar or conference. The function of a laser pointer in the presentation is just indicating a certain object. In this paper, to give a mouse-like function to a laser pointer, we implement a system that locates the track of a laser pointer. The system contains a FPGA that implements camera interface and noise filter. A software for ARM processor is programmed to analyze the spectrum of the captured image and track the pattern of a laser pointer with previously stored image. As a result, the tracking system could locate the position correctly most of time within 20m with 98% accuracy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.809-814
• /
• 2022

ADHD is a disorder showing inattentiveness and hyperactivity. Since symptoms diagnosed in childhood continue to the adulthood, it is important to diagnose ADHD and start treatments in early stages. However, it has the problems to acquire enough and accurate data for the diagnosis because the mental state of children is immature using the self-diagnosis method or the computerized test. In this paper, we present the classification method based on the CNN model and execute experiment using the EEG data to improve the objectiveness and the accuracy of ADHD diagnosis. For the experiment, we build the 3D convolutional networks model and exploit the 5-folds cross validation method. The result shows the 97% accuracy on average.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.12
• /
• pp.11-19
• /
• 1999

Fractal image compression algorithm has been studied mostly not in the view of hardware but software. However, a general processor by software can't decode fractal compressed images in real-time. Therefore, it is necessary that we develop a fast dedicated hardware. However, design examples of dedicated hardware are very rare. In this paper, we designed a quadtree fractal-based compressed image decoder which can decode $256{\times}256$ gray-scale images in real-time and used two power-down methods. The first is a hardware-optimized simple post-processing, whose role is to remove block effect appeared after reconstruction, and which is easier to be implemented in hardware than non-2' exponents weighted average method used in conventional software implementation, lessens costs, and accelerates post-processing speed by about 69%. Therefore, we can expect that the method dissipates low power and low energy. The second is to design a power dissipation in the multiplier can be reduced by about 28% with respect to a general array multiplier which is known efficient for low power design in the size of 8 bits or smaller. Using the above two power-down methods, we designed decoder's core block in 3.3V, 1 poly 3 metal, $0.6{\mu}m$ CMOS technology.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In this paper, a semi-infinite array analysis method is proposed to analyze the defects that may occur during the fabrication of the frequency selective radome. In the analysis of N×N finite array structure using 3D analysis software, much analysis time and memory are required, whereas the semi-infinite array structure analysis proposed in this paper can predict relatively accurate electromagnetic performance while reducing the analysis time. In comparison with the results of the periodic simulation, the simulation of the semi-infinite array structure confirmed the error within ±3%. To verify the results of the simulation, the results were compared with the measured results, and the same tendency at the point of performance change and similar performance degradation at the band of interest were investigated. Using the proposed semi infinite array structure analysis, it is confirmed that the analysis of defects in the electromagnetic periodic structure is possible.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.171-176
• /
• 2001

3차일 CIS 소프트웨어를 개발하기 위한 기술로는 공간데이터처리 및 공간분석기술, 컴퓨터그래픽스 및 가상현실 기술에 이르기까지 다양한 연구가 요구된다. 지리정보 가시화(visualization)에 관한 연구는 여러 GIS 응용분야에서 주요한 부분이 된다. 현재 2차원 기 구축된 데이터를 이용하여 3차원으로 가시화 및 분석을 수행할 수 있다는 것은 데이터와 소프트웨어 재사용 및 비용측면에서 중요한 의미를 가진다. 본 논문에서는 한국전자통신연구원에서 개발한 Mapbase 컴포넌트에서 빌딩 레이어 3차원 모델링 방법과 시설물의 다양한 상세도 제어가 가능한 LOD(level-of-detail) 모델러와 3차원 데이터와 최소한의 3차원 부가정보(빌딩높이, 도로폭등)를 이용하여 규칙기반 모델링(Rule-Based Modeling)을 통해 3차원으로 모델링 해낼 수 있는 3차원 장면 모델러 컴포넌트 설계방안을 제안한다. 장면 모델러 컴포넌트 분석을 위해 처리하는 이력 데이터, 수작업 3차원 모델링 여부, 소프트웨어 재사용성, 상호운용성, 구축 비용 등을 기준으로 분석하였다.

• ETRI Journal
• /
• v.14 no.4
• /
• pp.56-66
• /
• 1992

대용량의 가입자나 중계선을 수용하는 TDX-10 교환기는 모든 가입자의 호(call) 요구를 실시간으로 처리하여야 한다. 이러한 가입자의 호 요구를 효과적으로 처리하기 위해서 호처리 소프트웨어는 물리적으로는 여러 프로세스에 분산되고, 논리적으로는 여러 프로세서에 분산되는 분산구조로 모듈화 하였다. 프로세서는 기능분담과 부하분산을 위한 여러 프로세서로 구성되며, 프로세스는 영구적인 '모듈-프로세스와' 호 수행 중에 가입자선이나 중계선에 생성되어 호를 제어하는 '호-프로세스'로 구성하였다. 기능분담과 부하분산의 모듈화 구조는 기능의 설계와 실현이 용이하고, 새로운 기능의 추가나 기존 기능의 개선이 용이하도록 하였다. 본 논문에서는 프로그램의 생산성을 증대시키고 기능 확장과 개선이 용이한 호처리 소프트웨어 구조와 모듈화에 대하여 기술하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.159-164
• /
• 2005

Recently, it has demanded high-speed digital circuits as information increase. Therefore, electromagnetic characteristics of compact microwave circuit occurred importantly. And, the effect of the imperfect ground plane on the signal integrity and influence of coupling between two parallel lines for high-speed digital transmission line on the printed circuit board is investigated by FDTD simulations in 3-D electromagnetic analysis method. The results of FDTD simulation are compared with the ADS simulation in commercial software, analyzed lumped element of modeling and electromagnetic wave's radiation of slot as frequency. As a consequence, when the slot in the ground plane is under microstrip line, it has much effect on propagation of wave.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.307-312
• /
• 2018

In this paper, we can confirm the result of intuitive interface software implementation for operating a digital PA(Public Address) controller and the performance of audio mixer control part. Developed user interface software provides the maintaining management and control function of digital hybrid mixer. This SW loaded in the integrated control server controls an sound status of the audio mixer TAD-168M and checks the device status for Public Address integrated system. Also, this SW enables the integrated control and the continuous upgrade. Developed SW is connected to TAD-168M with Ethernet and linked to PC Lan port and the 4-port switch, located in the backside of TAD-168M, by LAN cable for communicating with operating PC. Integrated control including system management, audio control and uplink broadcasting control for broadcasting system will be made available with this novel developed system.