• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.200-201
• /
• 2003

광섬유 OTDR 센서는 전자기 잡음이 없으며 원거리 가시 및 다중화가 가능한 유망한 센서이다. 광섬유 내부를 진행하는 빛은 광섬유의 밀도 변화에 따라 미소한 광산란이 연속적으로 발생하게 되는데 이러한 광산란을 레일리 (Rayleigh) 광산란이라고 한다. OTDR 센서는 펄스광을 광섬유에 입사한후 되돌아오는 레일리 산란광을 측정하면서 임의의 위치에 주어지는 외란의 영향을 후방 산란광의 감소로 알아내는 센서이다. 광섬유 OTDR 센서에 관련한 연구는 다음과 같다. (중략)

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.407-413
• /
• 2008

In this paper, scattering matrix for the open ended rectangular waveguide with infinite flange is derived. To validate the scattering matrix approach, load admittance $Y_{L,10}$ obtained from the present scattering matrix method is compared with the results of the previous work. The convergence for scattering matrix solution versus TE and TM mode numbers is investigated. Also far field power pattern radiated from the aperture of the waveguide is given.

• Korean Journal of Crystallography
• /
• v.17 no.2
• /
• pp.60-65
• /
• 2006

표면 및 계면층의 결정구조, 결함구조, 불순물 편석, 표면의 전자 구조, 원자 진동 등과 같은 산화물의 표면물성은 촉매, 센서, 소결, 마찰, 부식 등과 같은 분야에서 그 특성을 좌우한다. 고체 표면의 결정구조 해석 수단으로 저에너지 이온산란 분광법이 유용한 도구로 알려져 있는데, 이 방법의 뛰어난 표면민감성은 표면에서의 효과적인 이온 중성화 과정에 기인한다. $He^+$, $Ne^+$, $Ar^+$ 등과 같은 이온은 Auger 중성화 과정에 의하여 쉽게 중성원자화 되고, 중성화 확율의 타겟에 대한 의존성이 낮기 때문에 이온빔으로서 종종 사용된다. 산란각도를 180$^{\circ}$로 고정하여 산란이온 검출기를 설치한 직충돌 이온산란 분광법의 경우는 산란된 이온의 궤적이 입사궤도와 거의 동일하기 때문에 산란궤적의 계산이 간단해지고, 수 층 깊이의 원자구조의 해석이 가능해진다. 본 고에서는 고체 표면의 원자구조를 실공간에서 해석할 수 있는 직충돌 이온산란 분광법에 대하여 측정의 기본원리, 측정장치, 간단한 분석 예 등에 관하여 기술하고자 하며, 다음 편에서는 복잡한 표면구조를 가지는 반도체 표면에서 직충돌 이온산란분광법의 이용하여 해석한 예를 중심으로 기술하고자 한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.114-120
• /
• 2008

In this paper, we extract the parasitic elements of the metal-insulate-metal(MIM) capacitor using short-open calibration (SOC). The scattering matrixes of short, open, and MIM structures in strip lines are measured by full electro-magnetic (EM) simulator and vector network analyser. The full EM simulations are performed by finite element method (FEM) that was fitted three dimensional structure analysis. The electro-magnetic effects of MIM capacitor laminated in the multi-layered structures are proposed the II equivalent circuit with lumped elements, and the relations between the measured scattering parameters of the MIM structures and lumped elements in the circuits are shown by performing 2 port network analysis. The extracted lumped elements using the proposed SOC method are independent to frequencies.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.1-9
• /
• 2003

The electromagnectic modal analysis method for the multiscreen structure with periodic slot array with including conductor thickness effect is presented. The multiscreen structure is seen to be exactly equivalent to a microwave guide closed by phase-shift walls. From this viewpoint, the entire generalized scattering matrix of the multiscreen structure is calculated by the cascade connection of the scattering matrices obtained by the modal analysis at guide junctions and the transmission matrices of guide region. The present method is verified in comparison with the results calculated by the previous method of moment for single screen structure. As an application example of the present method, the spatial filter having multiscreen structure is designed and the interesting characteristics such as transmission and reflection coefficient versus frequency & angle are investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.523-524
• /
• 2008

전자빔의 산란에 의한 자기 공명현상과 지파 사이크로트론과의 상호작용에 의한 해석에서 체렌코프 발진이 일어나는 것은 확인하기 위하여 대구경 후진파 발진기를 이용한 실험을 하였다. 전자계와 전자빌의 상호작용을 위한 조절을 위하여 도파관의 반경과 진폭, 파장을 조절하였으며 이에 따른 주파수의 발진을 알수 있었다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.11
• /
• pp.55-62
• /
• 2001

Field penetration and scattering characteristics of two dimensional open cylindrical cavity is studied. Exact analysis for this sort of structure is not achieved even if there are unusual phenomena of field penetration and scattering with cavity and aperture size. In this paper, we calculate a wide range of open cavity characteristics by using of FMM method, which is extended method of MOM. We find external mode of open cylindrical cavity corresponding to internal mode of closed cavity. The characteristics of resonance and scattering of this region is different compare with non resonant area. The result of study will apply to the EM wave shielding and RCS control.

• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.375-380
• /
• 2009

The scattering of a normally incident monochromatic light by optically active concentric double cylinders is studied by using a numerical method. A numerical code is developed on the basis of the analytical solutions, and the angular distributions of the intensity and the polarization of the scattered light are computed for some specific cases. The numerical code can be used to non-invasively determine the size, structure, and composition of a double cylinder with high accuracy by measuring the angular distribution of the scattered light by an experiment.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.3 no.1
• /
• pp.18-23
• /
• 1966

An experimental study of a steel plate thickness gauge by means of the measurements of backscatered gamma-rays has been carried out. The difference between this and other methods is that this method does not include any shilding matterials in the detecting probe, because the primary radiations and the backscattered radiations are detected simultaneously by an NaI (TI) scintillating crystal, and the activity of the Co-60 source used is low enough. In this thickness gauge, the thickness of the steel plates can be read directly on the counting ratemeter scale. The optimum conditions in the source-to-detector distance, window width of the analyzer, energy and strength of the gamma-ray source were found experimentally. The results have shown that the accuracy of the gauge was about $\pm$3% in the range of 3 to 8mm thickness. This gauge can be used to detect the pits or corrosions on the inner walls of the steel pipes.

• Radiation Oncology Journal
• /
• v.14 no.4
• /
• pp.339-345
• /
• 1996

Purpose : This study was performed for adequate irradiating tumor area when 6 MV linear accerelator photon was used to treat the head and neck tumor. The skin surface dose and maximum build-up region was measured by using a spoiler which was located between skin surface and collimator. Methods : A spoiler was made of tissue equivalent material and the skin surface dose and maximum build-up region was measured varing with field size, thickness of spoiler and interval between skin and collimator. The results of skin surface dose and maximum build-up dose was represented as a build-up ratio and it was compared with dose distribution by using a bolus. Results : The skin surface dose was increased with appling spoiler and decreased by distance of the skin-spoiler separation. The maxium build-up region was 1.5 cm below the skin surface and it was markedly decreased near the skin surface. By using a 1.0-cm thickness spoiler, Dmax moved to 5, 10.2, 12.3 13.9 and 14.8 mm from the skin surface by separation of the spoiler from the skin 0, 5, 10, 15. 20 cm, respectively. Conclusion : The skin surface dose was increased and maximum build-up region was moved to the surface by using a spoiler. Therefore spoiler was useful in treating by high energy photon in the head and neck tumor.