• Title/Summary/Keyword: 전자교환기

Search Result 169, Processing Time 0.027 seconds

TDX-10 호처리 소프트웨어 구조

  • An, Ji-Hwan;Jeong, Dong-Su
    • ETRI Journal
    • /
    • v.14 no.4
    • /
    • pp.56-66
    • /
    • 1992
  • 대용량의 가입자나 중계선을 수용하는 TDX-10 교환기는 모든 가입자의 호(call) 요구를 실시간으로 처리하여야 한다. 이러한 가입자의 호 요구를 효과적으로 처리하기 위해서 호처리 소프트웨어는 물리적으로는 여러 프로세스에 분산되고, 논리적으로는 여러 프로세서에 분산되는 분산구조로 모듈화 하였다. 프로세서는 기능분담과 부하분산을 위한 여러 프로세서로 구성되며, 프로세스는 영구적인 '모듈-프로세스와' 호 수행 중에 가입자선이나 중계선에 생성되어 호를 제어하는 '호-프로세스'로 구성하였다. 기능분담과 부하분산의 모듈화 구조는 기능의 설계와 실현이 용이하고, 새로운 기능의 추가나 기존 기능의 개선이 용이하도록 하였다. 본 논문에서는 프로그램의 생산성을 증대시키고 기능 확장과 개선이 용이한 호처리 소프트웨어 구조와 모듈화에 대하여 기술하였다.

  • PDF

A Study on the communication Method between the Adjacent Processors (근접한 프로세서간 통신방식에 관한 연구)

  • 황대환;박영덕;김선형;조규섭;박병철
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.12 no.6
    • /
    • pp.599-606
    • /
    • 1987
  • Giving a high degree of intelligence to the electronic equipments such as communication system is the general trend of nowadays. Therefore the multi-processor will be required in a single system and the switch gives an example of it. In this paper, "Reserved Bus" is proposed as the interprocessor communication method applicable to such system which has multi-processor in the limited space. The performance of proposed method is also analyzed. analyzed.

  • PDF

Design and Implementation of ACE200 MPLS Operation Administration and Maintenance Functions (ACE2000 MPLS 유지보수 기능의 설계 및 구현)

  • 김선철;박평구;이재섭
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2001.04a
    • /
    • pp.166-168
    • /
    • 2001
  • 최근 인터넷 이용의 증가는 전송 링크의 광대역 지원과 멀티미디어 트래픽 QoS 보장 등의 문제 해결을 필수적으로 요구하게 되었다. 또한 현재 인터넷 IP 서비스에서 한 단계 향상된 서비스, 즉 가상 사설망(Virtual Private Network) 서비스나 Voice over IP, Video over IP, 웹 호스팅, 전자 상거래 제공 등이 현실적인 문제로 대두되면서 이를 지원할 수 있는 네트워크 구성 요소의 필요성은 증가하고 있다. 이를 해결하기 위하여 IP와 ATM의 통합으로 MPLS 기술 개발이 활발히 진행되고 있다. MPLS 시스템이 현재 IP 네트워크에서 지원하는 것 이상으로 보다 유용한 운용(Operation), 관리(Administration), 유지보수(Maintenance) 기능을 지원해야 하기 때문에 네트워크 운용과 관리(OAM)는 매우 중요하다. 본 논문에서는 ACE2000 ATM 교환기를 기반으로 하는 MPLS 시스템에서 OAM 계층과 라벨을 고려함으로써 ATM 시스템의 운용관리 기능과 연계처리 가능한 MPLS 시스템에서의 통합 운용관리 기능을 설계하고 구현한다.

A Design and Implementation of MPLS Fault Management Function for HANbit ACE2000 System (HANbit ACE2000 MPLS 시스템 장애처리 기능의 설계 및 구현)

  • Park, Pyung-Koo;Kim, Sun-Cheul;Kim, Gwan-Joong;Lee, Jae-Sup
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2001.04a
    • /
    • pp.573-576
    • /
    • 2001
  • 본 논문은 한국전자통신연구원에서 개발하고 있는 HANbit ACE2000 교환기 기반 MPLS 시스템의 장애처리 기능의 구현 내용을 설명한다. 본 시스템의 장애처리는 장애검출(Fault Detection), 장애격리(Fault isolation), 장애진단(Fault Diagnose), 장애복구(Fault Recovery)와 같은 일련의 과정을 통하여 수행된다. 본 장애처리 기능의 특징은 장애발생시 시스템의 영향을 최소화하여 최대한 서비스의 연속성을 유지할 수 있도록 설계되었다.

  • PDF

Performance analysis of call control processor according to SAAL funtion distribution in ATM switching system (ATM 교환기에서 SAAL 기능 분산에 따른 호처리 프로세서의 성능 분석)

  • 여환근;송광석;노승환;기장근
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.35S no.2
    • /
    • pp.31-39
    • /
    • 1998
  • In this paper, we have presented a quantitative performance effect of CCP(Call Control Processor) when SAAL(Signalling ATM Adaptation Layer) function is distributed from CCP to SIMs(Subscriber Interface Modules) in an ATM switching system with distributed architecutre. For the performance analysis, SLAM II simulation language is used and subscriber signalling messageand inter-processor communication messages according to Q.2931 based local call processing procedure are taken into consideration in the proposed queuing network model. The results of simulation are compared with in case of processing SAAL function on CCP. It is observed that the processing utilization of CCP reach 24,000 BHCA and 25,700 BHCAwhen SAAL function load amounts to 10% and 20% of the processing time of the total message, respectively. These values shows that the processing utilization of CCP is alleviated about 7% in comparison with 2,000 BHCA in case that SAAL function is carried out on CCP. Consquently, it is shown that we have to consider seriously how to distribute the functions concerning call processing in a large cale ATM switching system architecture accomodating a number of SIMs.

  • PDF

Estimation of CTD and Peak-to-Peak CDV Allocation to Nodes in Domestic Region (국내영역에서 셀전달지연 추정 및 peak-to-peak CDV 노드별 할당)

  • Park, Chun-Kwan;Han, Jong-Seok
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.38 no.2
    • /
    • pp.6-12
    • /
    • 2001
  • When CBR source traffics are loaded to ATM switch and broadband network termination, CTD values of ATM switch and broadband network termination are measured and then the values of CTD in the domestic region arc estimated. The estimation values of CTD satisfy the objective of CTD in the domestic region allocated by allocation rules of 1.356. The peak-to-peak CDV allocation method based On Chernoff accumulation method is proposed and applied to the nodes of national portion. From the result of numerical analysis, the proposed method is more accurate than the equal allocation method for peak -to-peak CDV in case that the CDVs at each node and the number of ATM nodes on the path increase.

  • PDF

Growth of Whiskers Relating to plated Films of Tin (주석도금 피막에 관련한 위스커 성장)

  • Kim, Yu-Sang
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2015.05a
    • /
    • pp.139-140
    • /
    • 2015
  • 주석(Sn)은 뛰어난 유연성을 나타내기 때문에 접촉저항을 감소시킬 목적으로 전자부품과 전자기기의 도선과 단자를 피복하는데 사용된다. 하지만 특정한 조건에서 시간경과와 함께 위스커라는 침상결정이 발생하여 회로 단락을 초래하는 것이 문제이다. 위스커는 직선형, 굴곡형, 곡선형의 형태로 성장하며 직경은 $1{\mu}m$, 길이는 수백 ${\mu}m$에서부터 수 mm에 이른다. 발생 초기단계에서 성장이 정지된 작은 덩어리도 위스커와 함께 관찰된다. 주석도금 피막에서 발생하는 위스커는 1940년대 미국의 전화교환기 단락원인으로 널리 알려지게 되었다. 이러한 위스커를 억제하는 방법으로 주석-납 도금이 개발되었다. 주석-납 도금피막에서는 작은 덩어리가 다수 발생하는 반면에 위스커는 발생하지 않는다. 하지만 2006년 7월에 시행된 RoHS(Restriction of the use of certain Hazardous Substances) 지령에서 수은, 카드뮴, 6가 크롬 및 납은 유해물질로 지정되어 사용이 엄격히 규제되고 있다. 주석 도금피막의 위스커가 발생하고, 성장하는 원인으로 도금피막 내부의 압축응력과 전위, 산화피막, 도금피막-기판계면에서 발생하는 금속간화합물 주변의 변형을 들 수 있다. 본고에서는 도금하여 얻은 주석피막 표면에 형성된 위스커를 중심으로 증착피막과 주석도금 피막을 용융 응고하여 형성된 합금의 경시변화를 비교하고, 작은 덩어리와 위스커의 발생 및 성장 기구에 관하여 기술하였다.

  • PDF

Perfomance Analysis for the IPC Interface Part in a Distributed ATM Switching Control System (분산 ATM 교환제어시스템에서 프로세서간 통신 정합부에 대한 성능 분석)

  • Yeo, Hwan-Geun;Song, Kwang-Suk;Ro, Soong-Hwan;Ki, Jang-Geun
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.35S no.6
    • /
    • pp.25-35
    • /
    • 1998
  • The control system architecture in switching systems have undergone numerous changes to provide various call processing capability needed in telecommunication services. During call processing in a distributed switching control environment, the delay effect due to communication among main processors or peripheral controllers is one of the limiting factors which affect the system performance. In this paper, we propose a performance model for an IPC(Inter Processor Communication) interface hardware block which is required on the ATM cell-based message processing in a distributed ATM exchange system, and analyze the primary causes which affect the processor performance through the simulation. Consequently, It can be shown that the local CPU of the several components(resources) related to the IPC scheme is a bottleneck factor in achieving the maximum system performance from the simulation results, such as the utilization of each processing component according to the change of the input message rate, and the queue length and processing delay according to input message rate. And we also give some useful results such as the maximum message processing capacity according to the change of the performance of local CPU, and the local CPU maximum throughput according to the change of average message length, which is applicable as a reference data for the improvement or expansion of the ATM control system.

  • PDF

신호중계교환기 SMX-1에서 신호연결 제어부의 설계 및 구현

  • Yang, Sun-Seong;Lee, Yeong-Hui
    • ETRI Journal
    • /
    • v.14 no.3
    • /
    • pp.1-15
    • /
    • 1992
  • Stand-slone 신호 중계 교환기인 SMX-1(Signalling Message eXchange No.1)은 통신망의 신경계인 공통선 신호망(Common Channel Signalling Network)의 하부 구조를 구성하는 시스팀이다. SMX-1에 총괄명 번역서비스를 수용하게 되면 통신망 사용자에게 통신망 내부의 구성 및 구성 요소의 변화에 구속되지 않고 지속적인 지능망 서비스를 제공할 수 있게 된다. 본 연구에서는 SMX-1의 설계 이념에 부합되도록 신호연결 제어부의 기능을 소프트웨어 및 하드웨어적으로 분산화하여 설계, 구현함으로써 SMX-1의 고신뢰성 및 신속성을 추구하였다. 소프트웨어적으로는 총괄명번역 서비스 제공을 위해 국제 전신 전화 자문 회의(CCITT)권고 Q.711-Q.714에서 정의하고 있는 신호연결 제어부(SCCP:Signalling Connection Control Part)의 기능을 관리 기능(SCMG : SCCP Management Part)과 루팅 제어 기능(SCRC : SCCP Routing Control Part)으로 분리하여 각각의 기능을 이중화하여 설계, 구현하였다. 하드웨어적으로는 관리 기능을 하나의 보드로 집중화하고 루팅 제어 기능을 여러개의 보드로 분산화하였다. 분산되어 있는 루팅 제어기능이 총괄명번역 서비스를 수행하기 위하여 사용하는 루팅 제어 데이터의 일치성을 유지하기 위하여, 관리 기능에 루팅 제어 데이터를 총괄적으로 관리하는 루팅 제어 데이터 관리 기능(RCDMFB : Routing Control Data Management Function Block)과 운용 관리 기능 (OMS : Operation and Management Subsystem)의 제원관리 지원기능을 구현하였다.

  • PDF

A Study on the electric power rate improvement for in-building telecommunication infrastructure (구내통신용 전기통신설비의 전력요금체계 개선에 관한 연구)

  • MIn, Dae Hong
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2009.10a
    • /
    • pp.671-673
    • /
    • 2009
  • 구내통신은 건물내에 교환기 등의 전기통신설비를 구축하여 전화서비스는 물론 통신 운영 및 관리업무를 담당하는 설비로서 주택법 등에서 대규모 건물에 대해서는 구내통신설비를 구축하도록 규정하고 있다. 과거 전화서비스만 제공하던 시기에는 간단한 구조로 되어 있어 사용되는 전기의 사용량 이 많지 않았으나 아파트와 같은 공동주택의 건설이 많아지고 제공되는 통신서비스 역시 초고속인터넷을 비롯하여 각종 홈오토메이션 등 구내통신이 담당하는 서비스가 복잡 다양해 지면서 설비의 전기요금에 대한 이슈가 제기되고 있다. 현재 한국전력공사의 요금약관을 살펴보면 아파트와 같은 대규모 건물일 경우, 1전기사용장소 전체를 1전기사용계약단위로 하기 때문에 구내용 전기통신설비의 경우 가장 높은 요금인 주거용 전력요금을 적용받고 있다. 하지만 '사회기잔시설에 대한 민간투자법'에 따르면 전기통신설비는 항만, 수도, 집단에너지 시설 등과 함게 가회기반시설로 지정되어 있으며 다른 기간시설의 경우 산업용 전력요금을 적용받고 있어 형평성의 문제가발생하고 있다. 이에 본 연구는 현행 구내통신관련 법제를 살펴보고 구내통신요금의 합리적인 개선방안을 제시하고 한다.

  • PDF