• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.123-131
• /
• 2005

Lipid and protein contents in whole soybean seeds have negative correlation (r=-0.693**), however, these components in seed coat showed positive correlation (r=0.746**). Fatty acids in whole soybean seeds were higher in the order of $C_{18:2}>C_{18:1}>C_{16:0}>C_{18:3}>C_{18:0}$, while those of seed coat were higher in the order of $C_{18:3}>C_{18:2}>C_{18:0}>C_{16:0}>C_{18:1}$. The average content of total amino acid in twenty Korean soybean varieties was 38,938.7 mg/100 g, while that of seed coat was 4,418.4 mg/100g. Glutamic acid showed the highest composition rate $(16.4\%)$ in whole soybean seeds, while glycine was the highest in seed coat and their composition rate was $23.8\%$. The surface of shiny-lustre seed coats was smooth and their pore size was observed smaller than dull-lustre ones. Significant quadratic regression was observed among seed coat lightness, seed coat thickness, protein, lipid, unsaturated fatty acid and crude fiber. Fucose, rhamnose, glucose, mannose, galactose, arabinose and xylose were detected as a neutral mono-saccharides in the seed coats. The arabinose and xylose showed significant correlation with seed coat lightness. The unsaturated fatty acid was significantly correlated with seed coat lightness (r=0.726**). Water absorption rate was low in the thick seed coat varieties, but the rate was high in the shiny seed coat varieties. From the obtained results, it was considered that the thinner and brighter seed coat varieties were much favorable to increase the water absorption rate than thicker and darker seed coat ones.

• Applied Microscopy
• /
• v.38 no.3
• /
• pp.205-212
• /
• 2008

In this study morphological changes of the testes of golden hamsters treated with 6-aminonicotinamide (6-AN, 10 mg/kg body weight) in every two days were investigated using light and transmission electron microscopes. After the 7th injection of 6-AN, body weights of hamsters were significantly reduced, and the weight of testes were markedly reduced in the group of hamsters after 5th injections. Degeneration of seminiferous epithelium appeared first in the group receiving 5th injections, which were followed by severe degenerations after the 9th injection. In the degenerated seminiferous epithelium, deep vacuolization, and destruction of spermatogenic cells and Sertoli cells were also oberved. Multinuclear giant cells were also observed in the lumen of destructed seminiferous epithelium. But there were no edematous changes in the interstitial tissue, and the Leydig cells were found to be relatively intact. Therefore, these results show that 6-AN trigger severe morphological alteration of the spermatogenic cells and Sertoli cells, however Leydig cells are unaltered by 6-AN.

• Analytical Science and Technology
• /
• v.22 no.5
• /
• pp.395-406
• /
• 2009

The determination of iodine in the spent nuclear fuel and the volatile behavior during its acid dissolution have been studied by NAA(neutron activation analysis) and electron probe microanalysis (EPMA). Simulated spent fuels (SIMFUELs) were dissolved in $HNO_3$(1+1) at $90^{\circ}C$ for 8 hours. The iodine remained in a dissolver solution after dissolution, and that condensed in dissolution apparatus and trapped in the adsorbent by volatilization during the dissolution were determined, respectively. The condensed iodine was recovered by the redistillation with $HNO_3$(1+1) after transfer of the dissolver solution. The iodines in the dissolver and redistilled solution were separated by solvent extraction followed by ion exchange or precipitation method and determined by RNAA (radiochemical neutron activation analysis). The ion exchange column and filtration kit used for the isolation of iodine, which were prepared with a polyethylene tube, were used as an insert in the pneumatic tube for neutron irradiation. The iodine volatilized during the dissolution of SIMFUELs was collected in a trapping tube containing Ag-silica gel (Ag-impregnated silica gel) adsorbent, and the distribution of iodine trapped in the adsorbents were determined by EPMA. The adsorbing characteristics shown with the SIMFUELs were compared with those shown with a real spent fuel from the nuclear power plant.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.331-336
• /
• 2013

In this paper, plasma modeling is achieved using fluid dynamics, thereby electron density is derived. The way proposes the key to overcoming the limitations of conventional researches which adopt simplified plasma model. The result is coupled with Maxwell-Boltzmann system in order to calculate scattering waves in various incident angle. The first part is dedicated to perform plasma modeling in dielectric barrier discharge(DBD) structure. Suzen-Huang model is adopted among various models due to the fact that it uses time independent variables to calculated potential and electron distribution in static system. The second part deals with finite difference time domain(FDTD) scheme which computes the scattered waves when the modulated Gaussian pulse is incident. Founded on it, radar cross section(RCS) is observed. Consequently, RCS is decreased by 1~2 dB with DBD plasma. The result is analogous to the RCS measurement in other researches.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.50-55
• /
• 2008

As more DSP functionalities are integrated into an embedded mobile device, power consumption and device reliability have emerged as crucial issues. As the complexity of mobile embedded designs increases very rapidly, verifying the functionality of the mobile devices has become extremely difficult. Therefore, designs with error (fault) tolerance are often required since these capabilities will enable the design to operate properly even with some existence of errors. However, designs with fault tolerance may suffer from significant power overhead since fault tolerance is often achieved by resource replication. In this paper, we propose a low power and fault tolerant MAC (multiply-and-accumulate) design. The proposed MAC design is based on multiple barrel shifters since MAC designs with barrel-shifters and adders are known to be excellent in terms of power consumption.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.9
• /
• pp.701-706
• /
• 2018

The characteristic basis function method, or CFBM, is one of the representative electromagnetic methods widely used today. In this paper, we propose an accelerating algorithm for the far field interaction calculation of CBFM, to efficiently analyze the electromagnetic characteristics of arbitrarily large structures. To effectively analyze the electromagnetic characteristics of a large structure, it is essential to shorten the computation time. In the CBFM analysis method, the complexity can be greatly reduced by using approximations created via the multipole expansion method. The new algorithm proposed in this paper is applied to the computation of radar cross sections of conductor spheres and fighter aircraft, and it is confirmed that calculation time is reduced by 34 % and 74 %, respectively, without loss of accuracy compared with existing CBFM.

• Journal of Korean Society of societal Security
• /
• v.1 no.4
• /
• pp.73-81
• /
• 2008

Electromagnetic induction surveys are one of the useful methods to detect the location and buried depth of underground utilities by measuring horizontal and vertical magnetic fields. It can effectively detects single buried utility with the accuracy of within 20 cm. However when another utility is buried near to target one, the accuracy of utility location considerably decreases due to the distortion of magnetic fields caused from adjacent utility. This study shows the ways to verify the location and buried depth of target utility when magnetic fields does not show symmetric distribution due to adjacent another utility. Using Bluetooth wireless communication tools, we developed the way to records measured magnetic fields to handheld PDA. We investigated the criteria for minimum distance of two adjacent utilities to separate the individual responses through field model test.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.368.2-368.2
• /
• 2014

$SnO_2$을 이용한 반도체는 기체 센서, 트랜지스터, 태양전지와 같은 여러 분야에 적용 가능하기 때문에 많은 각광을 받고 있다. $SnO_2$을 이용한 반도체 소자는 높은 화학적 안정성과 독특한 물리 화학적 특성을 지니고 있을 뿐만 아니라 부피에 대한 높은 표면적 비율을 가지고 있다. 우수한 $SnO_2$나노구조를 얻기 위해서 전자관 박막증착, 졸겔법, 물리적 증기증착, 열증착과 같은 다양한 방법들이 사용되었다. 다양한 합성 방법들 중에서 전기화학 증착법은 높은 성장율, 대면적 공정, 낮은 가격과 같은 장점을 가지고 있어 많은 연구가 진행되었지만, $SnO_2$ 구조의 성장조건에 따른 체계적인 연구는 진행되지 않았다. 본 연구는 indium-tin-oxide (ITO)로 코팅된 유리 기판 위에 전기화학 증착법을 사용하여 다양한 성장 조건에 따라 성장된 $SnO_2$나노구조들의 물리적 특성들을 관찰하였다. ITO 유리 기판 위에 성장된 $SnO_2$나노구조는 음극의 전구체와 전류의 상호작용에 의해 생성되는 산소 분자의 환원에 의해 형성된다. $SnO_2$나노구조의 모양은 전기화학 증착의 성장 환경에 따라 달라진다. $SnO_2$나노구조를 관찰하기 위해 시간에 따른 전압-전류, X-ray광전자분광법, 주사형전자현미경, X-ray회절분석법을 사용하여 측정하였다. ITO 유리 기판 위에 성장한 $SnO_2$ 소자에 서로 다른 인가 전압을 가해 주었을 때에 따른 전류밀도를 측정하였다. 일정한 인가전압에서 $SnO_2$나노구조의 X-ray광전자분광법 측정 을 통해 화학적 결합과 X-ray회절분석법 통한 $SnO_2$ 성장 방향을 관찰하였다. 주사형전자현미경 측정을 통하여 $SnO_2$의 표면을 관찰하였다

• Applied Microscopy
• /
• v.38 no.2
• /
• pp.97-105
• /
• 2008

The fine structural modification of the granulocytes between the molt and intermolt period were investigated by the transmission electron microscopy. The granular hemocytes of the spider Araneus ventricosus were composed of three subtypes: eosinophilic granulocytes (EGs), basophilic granulocytes (BGs) and cyanocytes. Both of the EGs and BGs have electron dense granules within their cytoplasms, however the granules of BGs are larger than those of EGs. During the molt period, some of the EGs have fine structural modification in their cell organelles including formation of phagosomes as a result of active phagocytosis. However, the BGs have no phagosomes, but electron densities of the granules are changed to lower states than the intermolt period. The cyanocyte is the biggest hemocyte among the granulocytes. They contain numerous hemocyanin crystals in the cytoplasm with some electron-lucent vacuoles. During the molt period, some of the cyanocytes are changed to irregular shapes. High magnification electron micrographs reveal that the lattice sub-structure of the hemocyanin crystals are very similar to those of microtubules, and each tubule is composed of approximately 20 filaments with fine fibrillar structure.

• The Korean Journal of Malacology
• /
• v.31 no.1
• /
• pp.27-34
• /
• 2015

The anatomy and ultrastructure of the digestive diverticulum of Tegillarca granosa were described using light and electron microscopy. The digestive diverticulum was situated on the gonad and connected to stomach by a primary duct. Digestive diverticulum is composed of numerous digestive tubules. The epithelial layer of digestive tubule, which is simple, is composed of basophilic cells and digestive cells. Basophilic cells are columnar in shape, and the electron density is higher than that of the digestive cell. The cytoplasm has a well-developed endoplasmic reticulum, tubular mitochondria, Golgi complex and of membrane-bounded granules of high electron density. Digestive cells were classified into three types. According to cell shape, electron density and cell organelles. However, three types of epithelia was same that striated border was observed in free surface and lysosome was observed in cytoplasm. The results of this study suggest that basophilic cells and digestive cells in the digestive tubule are specialized in the extracellular and intracellular digestions, respectively.