• Journal of the Korean Institute of Navigation
• /
• v.6 no.2
• /
• pp.35-55
• /
• 1982

The attempt of this paper is to examine the basic theory on the analysis of the effect of a shading coil fitted to an electromagnetic contactor, and to compare experimentally the attracting force of an AC electromagnetic contactor with that of a DC electromagnetic contactor, with varying the airgap length. Equations are also proposed for calculating the AC and DC attracting force per unit consumption wattage by using the circuit constants measured from the experiment, and these calculated attracting forces are compared with those actulally measured, and then, the experimental contactor is examined in the view of its design. The calculated attracting forces are appeared to coincide well with the measured ones and the experimental contactor fitted with shading coil is revealed not so well designed for reducing the fluctuation of the attracting force.

• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.1
• /
• pp.40-48
• /
• 1983

Nowadays electromagnetic contactors are used for power on-off in various electrical loads. If the severe arc are occurred when power off, the magnetic contactor can not long run because of damage of contactor. In this paper, Authors indicate a method of how to minimize the arc when power off, Authors contrived a electronic circuit which can adjust the demagnetizing point of electro magnetic contactor, and control the demagnetizing point, utilizing our circuit, so as to occur the extinguish of arc at near the AC current zero point which is indispensibly exists. From the results of study, Authors could get confirmations the AC circuit could cut off with occurrence of mininum arc, and that possibility of extensive utilization of our method to hightension circuit.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.613-616
• /
• 2020

본 연구는 소상공인에게 쉽고 간단한 사용자 인터페이스를 통한 효과적인 창고 운용 최적화 솔루션을 제시하며, 장기적으로 소상공인의 종합적인 온라인 판로 개척 체계 확립을 목표로 한다. 세부적으로 최신 물류 트렌드인 RFID 기술을 접목한 Smart 입출고 Machine 의 개발과 Machine Learning 기술을 이용한 창고 보안 Smart 개폐 장치, 안정적인 제품/주문 Data 관리를 위한 클라우드 서버(AWS) 서비스를 제공함과 더불어 Data 분석을 통한 트렌드 분석으로 소상공인이 온라인 생태계에 수익을 높이며 안정적으로 정착할 수 있는 방안을 제시한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.1044-1046
• /
• 2022

'22년 중대재해처벌법과 항만안전특별법이 본격 시행되었다. 이에 대비하기 위하여 본 논문에서는 위험물 컨테이너에서 발생하는 안전사고를 사전에 방지하는 지능형 컨테이너 및 청소 로봇을 제안한다. 지능형 컨테이너 및 청소 로봇은 다음과 같은 기능을 수행한다. 첫째, 유해물질 감지 센서와 산소 센서 등을 통해 컨테이너 상태를 실시간으로 관리한다. 둘째, 유해물질 유출 및 산소 농도가 부족한 경우 위험 컨테이너로 변경 관리한다. 셋째, 컨테이너 내부 유해물질 청소를 위해 로봇을 호출하고 지능형 청소 로봇은 방제약품과 흡착포를 통해 컨테이너 내부를 청소한다. 넷째, 위험 컨테이너는 자동문 개폐관리 기능을 통해 유해물질 청소 완료 전까지 문을 폐쇄하여 안전사고를 방지한다. 본 논문은 제시한 기능을 통해 위험물 컨테이너에서 발생하는 작업자 질식사 등의 사고를 감소시키는 것을 목표로 한다.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.1
• /
• pp.71-76
• /
• 2002

Because the driving time is increased under the low speed by rapidly increasing of vehicles, this paper is presented a new ignition control system for improvement the fuel economy, which only some of cylinders are using under the idle status or low speed and preserving the engine rpm. is applicable to effective in fuel economy. An actual hardware was made to prove this new control system. The developed variable cylinder engine concentrated the heat neat the cylinders in idle status or low speed, so there was a problem in re-ignition. It was the reason of a lot of exhaust gas, high fuel consumption and instability of engine revolution. In this paper, in order to solve above problem to show the improvement fuel economy using the new ignition control system and valve opening period at idle status of low speed.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.253-254
• /
• 2008

최근 국내 IT 산업의 발달에 따른 디지털화에 따라서 대기전력에 의해서 소비되는 전력소모량은 일반 가정용 전원을 기준으로 할 때 전체 사용량의 11%에 육박하는 수준까지 나타나고 있으며, 이는 다른 선진국에 비해서도 상당히 높은 수준으로 미국의 5% 수준의 2배가 넘는 수치이다. 전기, 전자제품의 디지털화의 추세는 일반가구 및 산업시설에 공급되는 공급전압에 비해서 상당히 낮은 전압으로 제품이 동작하게 되며, 이러한 전압변환은 제품에 내장된 변압기에 의해서 수행되는데, 변압기는 전기 전자제품이 구동하지 않는 경우에도 일차측에 인가된 전압에 의해서 발생되는 대기전력 소비량에 의해서 일정 크기의 전력소모가 지속적으로 이루어지고 있다. 본 인구에서는 대기진력에 대해서 가전제품의 대기상태를 유지하기 위한 상태에선 소모되는 전력량 및 변압기의 1차측에서 유도되나 2차측에서 전력에너지로 변환되지 못하고 소실되는 손실을 모두 포함하는 것으로 정의를 내리고, 해당 적용 제품의 비구동상태에서 독립된 전원으로 구동되어 변압기의 1차 측을 완전히 개방하여 1차 측 전압인가에서 발생되는 손실까지 모두 줄일 수 있는 회로에 대한 기술적인 구성과 적용가능성에 대해서 연구하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3821-3826
• /
• 2014

This paper proposes a methodology for developing the performance of a solenoid valve for vehicles based on the dynamic analysis model by an electromagnetic field. The high performance solenoid model with a low current and high thrust was induced through the shape optimal design of the yoke and plunger. To perform the dynamic analysis of the solenoid valve, the input current profile was analyzed. The speed and thrust information was analyzed by FEM with this current profile. The co-simulation method of the circuit model of control logic and electromagnetic model of the solenoid valve was also proposed to analyze the performance with several current patterns. Finally, the performance of the original model and optimal one was compared.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1107-1112
• /
• 2002

An easy elevator originated is an opened system to compare an existing equipment, and learning efficient is high as a wiring that the sequence control circuit is on and off. The structure of an equipment to be controled from the first floor to the fifth floor is constructed by a lamp to express the function of the open-close of the door according to the cage moving, to express the mechanical actuation of the forward-reverse break and motor of load and of hand-worked control component of Push-Button S/W, L/S and Relay. In order to act of the elevator function that these components connected, designed the auto program and the sequence control circuit. Consequently the process that these(1~5steps) operated the cage with an auto program of the elevator and the sequence control circuit is controled by the step of forward and reverse that the L/S1~L/S5 of sensor adjust function let posit, by the adjustable S/W1~S/W5 of PLC testing panel and the S/W1~S/W5 which installed on the transparent acryl plate of a frame. In here, improved apparatus is the learning equipment of combined use to study the principle and the technique of the originated sequence control circuit and the auto program of PLC.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.349-356
• /
• 2015

Remote monitoring partial discharge sensor, equipping with hybrid filter combining optical and electrical noise reduction capabilities and with signal integrating function to calculate total arc energy, was investigated. Hybrid filter showed insensitivity to fluorescent and incandescent lamps under simulated distribution panel condition. Signal integrating function showed selective detection capability corresponding to different arc energy levels, while convention arc sensor had difficulty to discriminate arc energy level due to bursty arc waveform and peak level detection characteristics. The sensor showed possibility for application to remote monitoring partial discharge sensor, since it detected arc energy level corresponding to normal open and close discharge in low voltage 100A MCCB at 2m distance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.102-108
• /
• 2010

In this paper, we analyse the frequency diversity of BICM-OFDM with extended interleaving. The extended interleaving is an interleaving which is added to the existing BICM-OFDM system to extends the interleaving depth by times to the previous interleaving depth. Using the extended interleaving, the diversity order of the proposed system over -tap frequency selective channels is increased from min($d_{free}$, L) to min($d_{free}$, KL), where $d_{free}$ is minimum Hamming distance of the convolutional code. Simulation is also performed to show that the performance of the proposed system is better than that of the existing system even if the channel is an on-off channel in which the number of multi-paths is varying.