• 제목/요약/키워드: 전위차법

검색결과 73건 처리시간 0.031초

집중유도 교류 전위차법을 이용한 철도차량 차륜의 표면과 내부 결함 평가 (Evaluation of Surface and Sub-surface defects in Railway Wheel Using Induced Current Focused Potential Drops)

  • 이동형;권석진
    • 한국철도학회논문집
    • /
    • 제10권1호
    • /
    • pp.1-6
    • /
    • 2007
  • Railway wheels in service are regularly checked by ultrasonic testing, acoustic emission and eddy current testing method and so on. However, ultrasonic testing is sometimes inadequate for sensitively detecting the cracks in railway wheel which is mainly because of the fact of crack closure. Recently, many researchers have actively fried to improve precision for defect detection of railway wheel. The development of a nondestructive measurement tool for wheel defects and its use for the maintenance of railway wheels would be useful to prevent wheel failure. The induced current focusing potential drop(ICFPD) technique is a new non-destructive tasting technique that can detect defects in railway wheels by applying on electro-magnetic field and potential drops variation. In the present paper, the ICFPD technique is applied to the detection of surface and internal defects for railway wheels. To defect the defects for railway wheels, the sensor for ICFPD is optimized and the tests are carried out with respect to 4 surface defects and 6 internal defects each other. The results show that the surface crack depth of 0.5 mm and internal crack depth of 0.7 mm in wheel tread could be detected by using this method. The ICFPB method is useful to detect the defect that initiated in the tread of railway wheels

거대고리 아자크라운화합물과 전이금속 및 란탄족금속이온의 착물의 안정도 (The Stability Constant of Transition and Lanthanide Metal Ions Complexes with 15 Membered Macrocyclic Azacrown Ligands)

  • 홍춘표;최용규
    • 대한화학회지
    • /
    • 제48권6호
    • /
    • pp.577-582
    • /
    • 2004
  • 새로운 아자크라운 화합물인, 1,4-dioxa-7,10,13-triazacyclopentadecane-N,N',N''-triacetic acid, $N-ac_3[15]aneN_3O_2(II_a)$과 1,4-dioxa-7,10,13-triazacyclopentadecane-N,N',N''-tripropioc acid, $N-pr_3$[15]ane$N_3O_2(II_b)$는 이와 유사한 화합물의 합성방법을 수정하여 합성하였다. 합성된 이 아자크라운 화합물, $N-ac_3[15]aneN_3O_2와\;N-pr_3[15]aneN_3O_2$의 양성자화 상수값은 전위차법을 이용하여 PKAS 프로그램으로부터 측정되어졌다. 그리고 0.1 M $NaClO_4$수용액으로 이온강도를 조절하고, $25{\pm}0.1^{\circ}C$에서 란탄족금속인, $Ce^{3+},\;Eu^{3+},\;Gd^{3+}$$Yb^{3+}$과 리간드인 $N-ac_3[15]$ane$N_3O_2$$N-pr_3[15]aneN_3O_2$의 착물의 안정도상수를 전위차법을 이용하여 BEST 프로그램으로부터 구하였고, 또한 위와 같은 조건에서 전이금속인 $Co^{2+}$, $Ni^{2+}$, $Cu^{2+}$$Zn^{2+}$와 리간드인, $N-ac_3[15]aneN_3O_2$$N-pr_3[15]aneN_3O_2$의 착물의 안정도상수 값도 전위차법을 이용하여 BEST 프로그램으로부터 측정하였다. 합성된 아자크라운 화합물과 골격구조가 유사하고 아세트산과 프로피온산기를 포함하는, 1,7-dioxa-4,10,13-triazacyclopentadecane-N,N',N''-triacetic acid과 1,7-dioxa-4,10,13-triazacyclopentadecane-N,N',N''-tripropioc acid의 착물의 안정도를 비교분석하였다.

전위차법을 이용한 경화 콘크리트 및 콘크리트재료의 염화물 측정기술 개발 (Study for the Determination of chloride ion in hardened concrete using Potentiometic Methods)

  • 이경문;윤인준;서인호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
    • /
    • pp.578-581
    • /
    • 2006
  • This study was performed to develop acid-soluble extraction solution and water-soluble extraction solution for hardened concrete. By use of this potentiometric method one can determinate chloride ion concentration in hardened concrete without pre-treatment and it can be used on-site.

  • PDF

전위차법에 의한 필렛용접부의 잔여수명 예측에 관한 연구 (The study on the prediction of the remaining life at the fillet welded joint by using eletric potential method)

  • 엄태환;장경호;이재선;이진희;김유철
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2010년도 춘계학술발표대회 초록집
    • /
    • pp.56-56
    • /
    • 2010
  • 최근 강구조물의 건설이 지속적으로 증가되어 왔다. 또한 강구조물의 유지관리 및 안전성에 대한 관심이 급증하고 있다. 시설물의 안전성 확보는 대형사고의 사전 예방, 공용 중 갑작스런 가동 중지에 의하여 발생되는 비용증가를 사전에 차단 할 수 있다는 점에서 그 중요성은 매우 크다고 할 수 있다. 또한 각종 구조물은 열악한 사용조건, 고온, 고압, 고속, 대형화됨에 따라 일단 사고가 발생 했을 경우 대형사고의 위험이 예상되므로, 제작시 검사의 강화뿐만이 아니라 공용 중 구조물의 안전성을 진단 할 수 있는 모니터링 체계의 확립이 필요한 시점이다. 현재 국내에서 강구조물들의 균열 모니터링 시스템에 관한 연구는 매우 미흡한 실정이며, 현재 사용되고 있는 비파괴검사 방법은 UT와 RT등이다. 이러한 방법들은 많은 시간과 경비가 소요되며 또한 거대구조물 혹은 사람의 접근이 어려운 곳에는 적용하기가 힘들다. 또한 주기적인 검사 작업으로 인한 막대한 시간과 비용의 손실이 발생되고 있으며 초기 결함을 조기에 인지하지 못함으로써 적절한 보수 보강 대책이 이루어지지 않아 보수 보강 비용의 증대를 초래한다. 더욱이, 결함이 진전된 이후에도 이것을 인지하지 못하여 적절한 대응을 하지 않는다면 대형사고로 이어질 수도 있다. 따라서 강구조물에 대한 효율적인 유지관리가 가능하고, 초기결함으로부터 균열이 진전하여 붕괴되는 사고를 미연에 방지하며 초기에 보수보강 작업을 수행함으로써 보수보강 비용도 절감 할 수 있는 모니터링 시스템의 개발이 요구되고 있다. 이러한 모니터링 시스템의 개발은 기술적 측면에서 강구조물의 효율적인 유지 관리 노하우를 얻을 수 있으며 경제 산업적 측면에서는 보수 보강 비용 및 불필요한 주기적 점검 비용을 절감 할 수 있다. 이 연구에서는 전위차법을 이용하여 강구조물의 필렛 용접부에서의 균열진전양상을 파악하고 정량화를 통해 필렛용접부의 잔여수명을 예측하였다.

  • PDF

전위차법 효소 바이오센서를 이용한 식품의 구연산 정량분석 (Quantitative Analysis of Citrate in Foods Using a Potentiometric Enzyme Biosensor)

  • 권지영;김미라
    • 한국식품과학회지
    • /
    • 제38권2호
    • /
    • pp.169-175
    • /
    • 2006
  • Citrate Iyase(CL)와 oxaloacetate decarboxylase(OD)를 고정화하여 효소 반응기를 제작하고 효소반응으로 생성된 carbonate ion을 ion selective electrode를 이용한 전위차법 FIA system으로 식품에함유된 구연산의 농도를 측정하였다. 최적 센서 시스템의 조건은 CL과 OD을 같이 고정화시키는 방법으로 CL과 OD의 양이 각각 10 units, 60 units, 담체량은 0.3 g, carrier buffer 1(0.1 MTris buffer)은 pH 7.5, carrier buffer의 유속은 12 mL/hr으로 결정되었다. 최적 상태에서의 표준검량곡선은 $10^{-1}\;M-10^{-3}\;M$ 범위에서 직선적인 상관관계$(r^2=0.9986)$를 나타내었다. 당류와 유기산류에 대한 센서 시스템에 대한 방해효과를 측정한 결과 당류는 거의 저해효과를 보이지 않았으며 유기산의 경우도 저해 효과가 5% 미만으로 이들 물질에 의해 감응도가 크게 방해받지 않은 것으로 나타났다. 구연산 바이오센서와 GC를 사용하여 식품 시료에 함유된 구연산의 농도를 분석한 결과 두 방법간에 유의적인 차이가 없는 것으로 나타나 본 연구에서 구축한 구연산 바이오센서 시스템은 식품에 함유된 구연산 분석시 신뢰성 있는 결과를 주는 것으로 보여졌다.

직류전위차법을 이용한 AISI 316강 시효재의 탄소성 파괴인성 평가 (Evaluation of Elastic-Plastic Fracture Toughness of Aged AISI 316 Steel Using DC-electric Potential Method)

  • 임재규;장진상
    • 대한기계학회논문집A
    • /
    • 제21권3호
    • /
    • pp.519-527
    • /
    • 1997
  • AISI 316 steel has been used extensively for heater and boiler tube of the structural plants such as power, chemical and petroleum plants under severe operating conditions. Usually, material degradation due to microcrack or precipitation of carbides and segregation of impurity elements, is occured by damage accumulated for long-term service at high temperature in this material. In this study, the effect of aging time on fracture toughness was investigated to evaluate the measurement of material degradation. The elastic-plastic fracture toughness behaviour of AISI 316 steel pipe aged at $550^{\circ}C$for 1h-10000h (the aged material) was characterized using the single specimen J-R curve technique and eletric potential drop method at normal loading rate(load-line displacement speed of 0.2mm/min) in room temperature and air environment. The fracture toughness data from above experiments is compared with the $J_{in}$ obtained from predicted values of crack initiation point using potential drop method.

집중유도형 교류전위차법에 의한 강자성체 및 상자성체의 2차원 표면결함의 비파괴평가 (Nondestructive Evaluation of 2-Dimensional Surface Crack in Ferromagnetic Metal and Paramagnetic Metal by ICFPD Technique)

  • 김훈;장자철웅;정세희
    • 대한기계학회논문집
    • /
    • 제19권5호
    • /
    • pp.1202-1210
    • /
    • 1995
  • Aiming at nondestructive evaluation of defect with high accuracy and resolution, ICFPD(Induced Current Focusing Potential Drop) technique was newly developed. This technique can be applied for locating and sizing of defects in components with not only simple shape such as plain surface but also more complex shape and geometry such as curved surface and dissimilar joing. This paper describes the principle of ICFPD technique and also the results of 2-dimensional surface crack in ferromagnetic metal(A508 Cl. III steel) and paramagnetic metal (pure aluminum and stainless 304 steel) measured by this technique. Results are that surface defects in each specimen are detected with the difference of potential drop, and potential drops are distributed a similar shape for each metal and each depth. The normalized potential drop ( $V_{\delta}$2/$^{t}$ / $V_{{\delta} 2}$$^{-1}$) max. in the vicinity of defect is varied with the depth of defect. Therefore, ICFPD technique can be used for the evaluation of defect not only in ferromagnetic metal but also in paramagnetic steel..

제하 컴플라이언스법 및 직류전위차법을 이용한 Zr-2.5Nb 압력관 휘어진 CT 시편의 균열시작 평가 (Evaluation of the Crack Initiation of Curved Compact Tension Specimens of a Zr-2.5Nb Pressure Tube Using the Unloading Compliance and Direct Current Potential Drop Methods)

  • 정현철;안상복;김영석
    • 대한기계학회논문집A
    • /
    • 제29권8호
    • /
    • pp.1118-1122
    • /
    • 2005
  • The direct current potential drop (DCPD) method and the unloading compliance (UC) method with a crack opening displacement gauge were applied simultaneously to the Zr-2.5Nb curved compact tension (CCT) specimens to determine which of the two methods can precisely determine the crack initiation point and hence the crack length for evaluation of their fracture toughness. The DCPD method detected the crack initiation at a smaller load-line displacement compared to the UC method. As a verification, a direct observation of the fracture surfaces on the curved compact tension specimens was made on the CCT specimens experiencing either 0.8 to 1.0 mm load line displacement or various loads from $50\%\;to\;80\%$ of the maximum peak load, or $P_{max}$. The DCPD method is concluded to be more precise in determining the crack initiation and fracture toughness, J in Zr-2.5Nb CCT specimens than the UC method.

피로균열진전거동 평가를 위한 균열길이 측정법 - 직류전위차법

  • 한승호
    • 기계저널
    • /
    • 제37권10호
    • /
    • pp.41-46
    • /
    • 1997
  • 철강구조물 부재 내에 노치나 균열이 존재할 수 있고, 외부의 피로하중에 의하여 취약부에서 발생한 균열이 진전하여 전구조물의 최종파손을 야기시킬 수 있다. 부재를 보다 안전하게 사용하고 또한 신뢰성을 확보하기 위해서는 이미 손상된 부재에서 균열의 진전상태를 계측할 수 있는 방법이 확립되어져야 하고, 파괴역학적 파라미터를 이용한 사용재의 균열진전거동특성이 평가되어야 한다. 균열길이의 측정방법은 지금까지 많은 연구자들에 의하여 개발되어져 왔는데 크게 광학현미경을 이용하여 육안으로 직접 균열길이를 측정하는 방법과 컴플라이언스, 초음파, AE 또는 전기적 신호를 통하여 얻어진 결괄부터 균열길이로 환산하는 간접적인 방법으로 대별된다. 대부분의 균열길이의 측정방법은 많은 수작업이 요구되고, 특히 하한계응력확대계수영역의 미세한 균열진전량을 측정하기에는 어려움이 따르고 있다. 이에 대하여 전도체 시험편에 일정전류를 흐르게 하고 균열길이의 증가에 따라 변화하는 전위차로 이를 균열길이로 평가하는 전기적인 측정방법이 있다. 이 방법은 실험장치가 비교적 간단하고 미세한 균열길이의 측정이 용이하여 균열길이의 직접적인 측정이 곤란한 고온역 그리고 충격하중하에서의 균열길이 측정에 이용이 확대되고 있다. 이 글에서는 여러 균열길이 측정방법의 장.단점에 대하여 고찰하고, 그 중 많은 장점을 갖고 있는 직류전위차법의 실험방법을 소개한다.

  • PDF