• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2551-2553
• /
• 2000

고속 신호처리 및 실시간 제어 분야에 적합한 제어성능을 발휘하기 위해서는 신호처리전용 마이크로프로세서인 DSP(Digital Signal Processor)를 이용한 제어용 보드가 널리 활용되고 있다. 본 연구를 통하여 전기도금용 전원장치의 고성능화를 위하여 DSP제어용 보드를 개발하였으며, 전체구성은 고속 신호처리를 위한 메인 마이크로프로세서로서 경제성과 응용범위가 넓은 TMS320C32 DSP CHIP, Wait없는 프로그램 및 데이터 처리를 위한 고속 SRAM, 외부 디지털 입출력을 위한 인터페이스 회로, 아나로그 입출력 회로 및 PC 혹은 다른 마이크로컴퓨터와의 통신을 위한 직렬 통신 회로 등으로 구성하였다. 개발된 DSP 보드는 시제품 제작을 완료하여 그 성능 및 신뢰성을 검증하였으며, 전기도금장치의 고성능 제어처리를 위하여 채용하여 상품화 개발을 완료하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1691-1692
• /
• 2006

본 논문은 역률개선 효과가 있는 MERS(Magnetic Enery recovery switch)를 사용하여 에너지 효율에서의 결과를 입증하고자 한다. 전원과 유도성부하에 직렬 연결된 MERS는 Full Bridge와 비슷한 구성으로 전력용 MOSFET(or IGBT) SWITCH 4개와 전해 DC콘덴서 1개로 구성되어진다. MERS의 콘덴서는 부하와 콘덴서의 리액턴스, $Xc<X_L$을 만족하는 콘덴서의 용량을 선택하고 콘덴서에 충전된 전압에 의해 부하의 유도계수를 보상하여 역률을 1로 추종하며 개선된다. 이때 스위치는 전원 전압에 대해 zero-voltage switching과 zero-current switching을 하게 된다. 만약 부하가 변하더라도 $Xc<X_L$을 만족한다면 자동적으로 역률은 1에 맞추어지게 된다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.240-241
• /
• 2012

본 연구에서는 분산전원과 에너지저장으로 구성된 독립형 DC 마이크로그리드의 신뢰도를 향상시키기 위한 협조적 Droop 제어기법을 제안하고 그 성능과 동작을 분석한 내용에 대해 기술하고 있다. 제안하는 시스템의 동작 타당성을 체계적으로 분석하기 위해 PSCAD/EMTDC 소프트웨어를 이용한 시뮬레이션 모델을 개발하였으며 이를 기반으로 하드웨어 시스템을 제작하여 제안하는 시스템의 동작특성을 분석하였다.

• Environmental and Resource Economics Review
• /
• v.22 no.4
• /
• pp.691-726
• /
• 2013

We develop a hybrid model which allows the change in electricity generation mix by adding the electricity-sector components of bottom-up model to the conventional CGE model. The electricity sector is represented as a sum of separate generation technologies, each of which has the form of DRTS (Decreasing Returns to Scale) production function, unlike the conventional CGE model. We compare the effects of the 30% emission reduction target using the hybrid model with those using the conventional CGE model. The cost of meeting the target is lower with the hybrid model than the conventional CGE. It is consistent with previous studies in that adding the bottom-up components to the top-down model reduces the cost of emission reduction. In an extra analysis we find that an additional regulation like RPS (Renewable Portfolio Standard) increases the cost.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.9-14
• /
• 2009

This paper describes measurement of an on-ship power supply noise in mixed-signal integrated circuits. To measure the on-chip power supply noise, we can check the effects of analog circuits and compensate it. This circuit consists of two independent measurement channels, each consisting of a sample and hold circuit and a frequency to digital converter which has a buffer and voltage controlled oscillator(VCO). The time-based voltage information and frequency-based power spectrum density(PSD) can be achieved by a simple analog to digital conversion scheme. The buffer works like a unit-gain buffer with a wide bandwidth and VCO has a high gain to improve resolution. This circuit was fabricated in a 0.18um CMOS technology and has 2.06mV/count. The noise measurement circuit consumes 15mW and occupies $0.768mm^2$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.34-40
• /
• 2006

This paper proposed power system for new DC 49[V] telecommunication using forward three-phase PWM rectifier power factor and efficiency for improvement of ripple voltage. Proposed power system for DC 48[V] telecommunication that consists of power conversion devices including switch, inductor and condenser were made between each line, in power inverter device of each switch control turn-on in period of continuity time control to get power factor '1' of sine wave current and on-off of switch lessens peak current that was happened and got conversion efficiency 92.1[%] composing in PWM rectifier of forward form instead of general PWM rectifier. Also, harmonic input regulation value(IEC61000-3-2 Class-As) satisfy input current and reduce ripple factor of output voltage in state that distortion of three-phase supply is overlapped each other.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.3
• /
• pp.273-277
• /
• 2016

In this paper, we deals with the digitization of high frequency sine wave power supply using power source of high frequency surgical equipment and RF device. High frequency surgical equipment has been using commonly on medical surgery because of its merits such as programmable depth of incision, availability of incision and coagulation in the same device, increasing the usability on surgical side. However, the core part of the device is consists of vacuum tubes which are expensive, not ease to use and must be imported, therefore it is inevitable of high prices, forces to develop the fully digitized alternative technology. The fully digitized high frequency sine wave power supply for surgical device is proposed and verified by experimental results.

• Environmental and Resource Economics Review
• /
• v.27 no.4
• /
• pp.695-723
• /
• 2018

Recently, extreme weather due to climate change has become more frequent, and increase of fine dust has worsen air quality in Korea. Therefore, not only negative perception on coal-fired power generation is dominant, but also the social acceptance of nuclear power generation declines. This study aims at deriving consumer preferences on the mid and long term power mix with various energy sources. Willingness to pay for each generation source was estimated and the preference heterogeneity of consumers was examined by using mixed logit and latent class models. Mixed logit estimation results show that the preference heterogeneity of consumers is especially large for the nuclear power relative to renewable or coal energy. According to the estimation results from the latent class model, group 1 prefers renewable energy while group 2 prefers coal energy. Group 3 shows lexicographic preference which means restricted rationality. As for the policy implication, it is necessary to understand the preference heterogeneity of consumer groups in planning the mid to long term power mix.

• 전기의세계
• /
• v.36 no.7
• /
• pp.502-505
• /
• 1987

전력계통 및 전원계획분야는 양질의 전력에너지를 발생원으로부터 수용처까지 경제적으로 안정공급하기 위한 이론과 기술을 연구, 개발함을 목적으로 한다. 그리고 그내용으로서는 전기에너지시스템의 구성요소인 전력계통의 해석, 시뮬레이션, 설계, 제어, 운용, 예측, 계획등의 공학적 및 기술적 문제를 다루게 될 것이다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.04a
• /
• pp.243-248
• /
• 2000