• Journal of Navigation and Port Research
• /
• v.29 no.10 s.106
• /
• pp.859-863
• /
• 2005

This paper describes the improvement of power control characteristics of ship's emergency lighting power supply(SELPS), by which electric power is controlled extensively, and power ON-OFF is controlled and system parameter monitored in remote distance by PC serial communication. Proposed system is composed of step-down converter(SDC), emergency power supply circuit(EPSC), half bridge(HB) inverter, fluorescent lamp(FL) starting circuit, microprocessor control and multi communication circuit. Experimental works confirm that relative system stops when over current is detected and speedy and stable emergency power is supplied when main power source cut-off, and controls input power up to 35[$\%$] by adjusting pulse frequency of the HB inverter, and ON-OFF control of multiple SELS, real time transmission and monitor of parameters as to voltage, current, and power values are performed appropriately by PC communication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1227-1234
• /
• 2008

In this paper is designed a 256-bit synchronous OTP(one-time programmable) memory required in application fields such as automobile appliance power ICs, display ICs, and CMOS image sensors. A 256-bit synchronous memory cell consists of NMOS capacitor as antifuse and access transistor without a high-voltage blocking transistor. A gate bias voltage circuit for the additional blocking transistor is removed since logic supply voltage VDD(=1.5V) and external program voltage VPPE(=5.5V) are used instead of conventional three supply voltages. And loading current of cell to be programmed increases according to RON(on resistance) of the antifuse and process variation in case of the voltage driving without current constraint in programming. Therefore, there is a problem that program voltage can be increased relatively due to resistive voltage drop on supply voltage VPP. And so loading current can be made to flow constantly by using the current driving method instead of the voltage driving counterpart in programming. Therefore, program voltage VPP can be lowered from 5.9V to 5.5V when measurement is done on the manufactured wafer. And the sens amplifier circuit is simplified by using the sens amplifier of clocked inverter type instead of the conventional current sent amplifier. The synchronous OTP of 256 bits is designed with Magnachip $0.13{\mu}m$ CMOS process. The layout area if $298.4{\times}314{\mu}m2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1074-1079
• /
• 1999

A high performance CMOS receiver for 155.52 Mbps STM-1 digital communication has been designed and fabricated. The ASIC operates properly with 155.52 MHz clock frequency in case of the data loss due to some system error such as transmission line open or data transfer fail. Also it operates properly in case the system starts after the power failure or system maintenance. The designed circuit has especially PLL based self oscillation loop which operates on abnormal environment which is added to main oscillation loop. The measured results show that the circuit operates well with 153.52 MHz clock frequency not only on normal environment but also on abnormal environment. Rms jitter of the PLL loop is about 23 ps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.423-432
• /
• 2012

We design a control circuit that can switch input power between a rechargeable battery and a sensor communication device (mote) depending on the operating state of a solar cell as well as the active and sleep mode of a sensor MAC protocol. A mote that simply combines a solarcell and a rechargeable battery may die if there is not sunlight long. A battery is recharged if sunlight is sufficient and a device is in a sleep mode, and it supplies power if sunlight is low and the mote is in an active mode. A mote can switch its input power between solar cell and battery depending on the output level of a solar cell. During this switching, a mote may lose its state information due to the reset of a microprocessor by the transient power-off. A capacitor is used to cope with this phenomenon and also supplies power to a mote during a sleep mode. Experimental results show that the solar cell based mote operates in a very stable manner against the lack of sunlight long.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.87-93
• /
• 2005

Today, the sciences in medical and nursing fields are becoming progressively more dependent on electrical apparatus for the preservation of life of hospitalized patients. Therefore, it is required more safety medical power distribution system in order to protect patients and physicians more securely from unexpected leakage of current. Especially for the medically used rooms which use life sustaining equipment power should be provided as supplying continuously without interrupting with lowest leakage current. This thesis proposed the reason why Isolation Power System is safety through the circuit analysis and applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.3079-3084
• /
• 2014

When an integrated circuit device is burned out under high-intense radiation and device-level simulation that usually requires manufacturer's proprietary information is not available, experimental conformation of a failure mechanism is often the only choice. To distinguish Latchup from other causes experimentally, a new combination of multiple techniques have been developed and demonstrated. Power supply circumvention, hot-spot monitoring using an infrared camera, and supply current monitoring techniques were implemented for the conformation of the Latchup.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.107-111
• /
• 2019

In FPD WET equipment, heaters are used a lot. There are many electric accidents caused by short circuit and overheating due to the use of heater, so it is necessary to have a safe electric system and interlock. Therefore, in this paper, we propose an electrical schematic and interlock for FPD WET equipment. In this paper, a hardware interlock such as a level sensor, an overheat protector, and an SSR heater sink is inserted, and the electric system is composed of ELB - MC - SSR - EOCR - heater. When the interlock occurs, the magnetic contactor (MC) is turned off and the power of the heater is cut off.EOCR, an electric overcurrent protection device, has an interlock to shut down the MC when there is an abnormality in the heater while checking the overcurrent, undercurrent and disconnection. These circuit configurations and interlocks are likely to be useful not only for WET equipment but also for any equipment in which the heater is placed.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.48-49
• /
• 2014

본 논문에서는 4권선 변압기를 이용하여 멀티레벨 운전을 하는 새로운 결선 방식을 제안하였다. 일종의 개방형 권선 구조의 확장으로서, 동일한 하드웨어에서 결선만 바꿈으로써 2차단 권선에 인가되는 전압의 레벨 수를 늘릴 수 있다. 본 논문에서는 제안된 결선 방식에 대한 등가회로를 중첩원리를 이용하여 유도하였다. 제안된 결선 방식을 3개의 델타 결선된 권선에 적용하면, 2레벨 인버터를 사용하더라도 1개 권선의 전압을 합성하는 데 6개의 스위칭 상태가 관여하게 되어 권선 전압의 레벨수를 9개까지 늘일 수 있다. 제안된 회로의 등가회로를 도출하고 모의실험을 통해 등가회로의 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.6-8
• /
• 2003

합1성단락시험에서 차단기의 정확한 아크시간을 검증하기 위해서는 재점호 회로가 필요하게 된다. 재점호장치는 전류원회로의 전류영점 직전에 기울기가 매우 큰 전류를 주입하여 차단기가 시험전류를 차단할 수 없게 하여 차단기의 아크시간을 직접시험과 동일하게 유지시키는 장치로서 본 장치를 구동하는 핵심장치는 고속도로 고전압 및 대전류를 투입하는 스파크 갭 스위치이다. 현재까지 이러한 용도의 스파크 갭 스위치가 개발되어 사용되고 있지만 본 논문에서는 고속 투입스위치로 진공차단기의 인터럽터를 사용하고, 시동용 전원으로 직류 12V만을 사용하여 정확하고 신뢰성 있는 재점호 장치용 스파크 갭 스위치의 설계, 제작 및 시운전 결과 등에 관해 기술 하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.17-27
• /
• 2022

In this paper, ED-H algorithm, an optimal real-time scheduling algorithm dealing with the characteristics of the integrated energy harvester system with a capacitor, is extended to satisfy the time constraint under the blackout state which is a deliberate power-off state by an intelligent power management unit adopted in the system. If the power supply system does not have enough energy, it temporarily shuts off the power supply to protect the circuit and capacitor and resumes the supply again when the capacitor is fully charged, which may delay the task execution during these blackout states by calculating the time according to the occurrence of the events. To mitigate the problem, even if task execution is delayed by the original ED-H algorithm, the remaining time of the subsequent time units no longer can afford to delay the execution of the task is predicted in the extended algorithm and the task is forced to be scheduled to meet the time deadline. According to the simulation results, it is confirmed that the algorithm proposed in this paper has a high scheduling performance increase of 0.4% to 7.7% depending on the characteristics of the set of tasks compared to the ED-H.