• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.249-251
• /
• 2013

본 논문은 LCL 필터를 가진 계통연계형 인버터 기반 마이크로그리드가 독립 운전 모드에서 동작할때의 인버터 출력 전압 제어 방식에 대해 다루고 있다. 분산 전원 기반의 마이크로그리드가 독립 운전 모드로 전환될 경우 마이크로그리드는 분산 전원만으로 전체 지역적 부하를 담당해야 하는 의무를 지니게 된다. 따라서 이때 마이크로그리는 전압원으로 가정되며 이를 위해 전압 제어가 수행되어져야 하며 담당하고 있는 부하가 불평형 또는 비선형 부하 일 경우 역상차, 영상차, 특정 차수의 고조파가 발생되기 때문에 기존의 전압 제어 방식을 사용할 경우 출력 전압에 높은 THD 가 발생하게 되며 이는 부하의 성능을 저해하는 요소로 작용한다. 따라서 본 논문에서는 기존의 PI 제어기 대신 특정 주파수에서 높은 제어 게인을 갖게하는 P+ 다중 공진제어기를 선정하였으며 이를 특정 고조파 별로 다중으로 제어함으로써 비선형-불평형 부하 연결에 의한 악영향에 대처하고자 하였다. P+ 다중 공진제어에 의한 출력 전압 THD 개선 효과는 PSIM Simulation 을 통해 검증되었으며 기존의 PI, Advanced PI 제어기와 그 성능이 비교 분석되었다.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1148-1150
• /
• 2004

본 논문에서는 $400^{\circ}C$ 이상의 과열 증기발생을 위하여 6kW급 유도가열장치를 개발하여 식품건조 시스템에 적용한 예를 보인다. 유도가열장치는 과열 증기의 온도를 제어하기 위하여 인버터 입력 전압을 $100\sim200V$로 가변제어가 가능하게 하였고, 인버터 입력 전압은 벅컨버터를 사용하여 기준 전압을 과열증기의 온도에 대한 전압 값을 사용하여 제어하였으며, LC 공진에 의해 발생한 전류로 증기 가열 챔버를 유도 가열하여 과열 증기를 발생하게 하였다. 발생한 과열 증기는 식품 건조를 위하여 건조로에 투입되어 고온 건조에서 식품의 건조시간을 단축시킬 수 있었으며, 식품의 손상을 줄일 수 있었다. 이의 검증을 위하여 유도 가열 장치를 설계/제작하여 실험하였으며, 식품 건조 테스트를 행하였다.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.650-654
• /
• 2007

Induction motors are widely used as a source of driving force in electric vehicles and pulse width modulation (PWM) inverters are applied to their operation. The issue is that insulation of inverter-fed induction motors (IFMs) are more stressed than in line-powered motors by transient voltages. This paper dealt with experimental results on transient voltage produced by the PWM operation of an induction motor. The peak and the dv/dt of transient voltage depending on the length of power feeding cable and operating frequency were investigated. In the experiment, transient voltages up to 3.3PU of the rated-inverter voltage were recorded for the cable length of 50m. As the cable length is increased, the peak voltage appeared at the motor terminals increases. This phenomenon can be explained by the reflection and the transmission of travelling wave. Consequently, special care for the cable length between the motor and the inverter should be taken in the use of IFM to ensure the full life of insulation system.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.37-38
• /
• 2012

무정전전원장치(UPS: Uninterruptible Power Supply)는 정전 등의 사고가 발생할 때 양질의 전원을 부하에 공급하는 장치이다. 무정전전원장치의 구성은 크게 역률개선회로, 인버터, battery charger, battery discharger부로 크게 4개로 나눌 수 있다. 그 중 정전 등의 사고발생 시 battery에 충전되었던 에너지를 인버터 부로 공급하여야하며 이를 담당하는 부분이 battery discharger부이다. battery의 전압은 비교적 낮은 전압이며 인버터의 입력에 필요한 전압은 비교적 큰 전압이기 때문에 승압형 컨버터가 필요하게 된다. 본 논문에서는 UPS battery discharger용 3KW급 LLC 공진형 컨버터를 설계하고 실험 검증하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.52-60
• /
• 2005

Generally, a voltage difference or voltage distortion exists between the reference voltage and the practical voltage applied to a motor in a pulse width modulated(PWM) voltage source inverter(VSI). This voltage distortion varies with the operating conditions such as the temperature, DC link voltage, and phase current level. Also the voltage distortion affects the machine current distortion, torque pulsations, and control performance. In this paper, the voltage distortion in a PWM VSI is analyzed and a new on-line estimation method based on the model reference adaptive system(MRAS) is proposed to compensate the time varying voltage distortion, while considering the parameter variations for a permanent magnet synchronous motor (PMSM). The simulation and experimental results show the effectiveness of the proposed voltage difference observer and the compensation method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.1
• /
• pp.72-78
• /
• 2006

Distributed generation (DG) systems go to intentional islanding operation to back up private emergency loads when the main grid is out of electric power. Conventional utility interactive inverters normally operated in current control mode in DG system must change their operation mode into voltage control mode to ensure stable voltage source to the emergency loads when intentional islanding operation occurs. During the transfer between current control mode and voltage control mode, serious transient problem may occur on the output terminal voltage of the utility interactive inverter. This paper proposes reasonal inverter topology and its control algorithm for seamless transfer of DG systems in intentional islanding operation. Filter design guide line and data for a LCL filter that is appropriate for the proposed control algorithm are also presented by the authors.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.125-126
• /
• 2012

무효 전력을 보상하기 위한 장치로 단상 인버터를 이용한 멀티레벨 인버터를 이용할 때 불평형 부하가 아닐 경우에도 각각 직렬 연결된 단상 인버터들 사이에서 DC-Link 불균등 현상이 발생한다. 이 불균등에 대한 원인 및 해결 방법을 제안하였다. 그리고 이 알고리즘을 이용한 시뮬레이션으로 그 가능성을 증명하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1617-1624
• /
• 2006

This paper presents system modeling, modified space vector PWM implementation and design of a closed loop controller of the Z-source inverter which consists of L and C components and shoot-through zero vectors for DGS. Zero vector periods of SVPWM utilized to boost DC-link voltage instead of conventional DC/DC converter and transformer. Only two shoot-through vut(nn are used for DC link voltage control during one switching period without loss of non-zero vectors. Discrete time sliding mode controller, robust servomechanism controller are designed to realize fast and no-overshoot current response and a steady state voltage error. Simulation results are shows the effectiveness of the proposed algorithm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.209-215
• /
• 2006

Now, in this paper, going to present you with an Idea related to a new inverter of multi-step voltage source, that Is, the double-connected 12-step inverter with an auxiliary circuit. It possibly can be 24-step inverter with 3-phase voltage source which will enable us make full application even to medium and high power-level Motor drive, UPS, STATCOM, SVC, etc. in which the PWM method could not be employed. 24-step operation can be obtained from the link between the existing 12-step inverter and the additional auxiliary circuit in which the transformer of auxiliary circuit generates ripple voltage delivered to the inverter. Through a lot of experiments and simulations, (from which the validity of this scheme is confirmed,) we came to the conclusion that the increase of the primary winding number on transformer by 2N(N=1,2,3....) leads to the 12M-step(M=2,3,4...) inverter. The validity of the proposed scheme is confirmed by the simulated and experimental results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.72-79
• /
• 2009

Solar energy is desirable due to its renewable and pollution-free properties. In order to utilize the present utility grid infrastructure for power transmission and distribution, a do-dc boost converter and grid connected dc-to-ac inverters are needed for solar power generation. The dc-dc boost converter allows the PV system to operate at high do-link voltage. The single-phase inverter provides the necessary voltage and frequency for interconnection to the grid. In this paper, first, current loop transfer function of a single-phase grid-tie inverter has been systematically derived Second the MPPT of conductance increment method at converter side is proposed to supply the maximum power to the inverter side. Simulation results are shown to access the performance of PV system and its behaviour at the interconnection point.