• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.198-199
• /
• 2013

본 논문은 군용 UPS 시스템에서 Dual Active Bridge(DAB) 컨버터를 이용한 절연형 양방향 배터리 충전기를 제안한다. 일반적인 군용 UPS 시스템은 AC-DC 정류기, DC-AC 인버터, 양방향 DC-DC 컨버터, 배터리 충전기, 배터리로 구성되며, 여러 부하상태들에 대한 지속적인 전력공급을 위하여 안정적인 에너지 저장 시스템이 요구된다. 다양한 양방향 DC-DC 컨버터들 중, DAB 컨버터는 buck, boost 동작이 가능한 고효율 절연형 양방향 컨버터이다. 본 논문에서는 6kW(입력 380Vdc, 출력 32/21Vdc) DAB 컨버터에 대한 토폴로지 분석하고, 파라미터 및 제어 알고리즘 설계를 제안하고 시제품을 통해 이를 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.154-156
• /
• 2008

본 연구에서는 종전의 전압형 및 전류형 능동전력필터를 대체 할 수 있으며, 부하의 특성에 무관하게 적용 가능한 Z-소스 인버터(Z-source inverter) 토폴로지의 능동전력필터에 대하여 고찰하였다. Z-소스 토폴로지의 능동전력필터의 보상 직류전원으로는 연료전지 PEMFC를 사용하였다. 본 연구에서 제안된 시스템은 고조파 발생원 비선형 부하와 병렬로 연결된 Z-소스 능동전력필터와 7고조파 (420Hz) 동조 필터로 구성되며 Z-소스 능동전력필터의 스위치 스트레스를 감소할 수 있다. 제안된 Z-소스 하이브리드 능동전력필터(Z-HAF : Z-source hybrid active power filter)의 보상 알고리즘으로는 전류 동기 검출법(CSD)을 사용하였으며, PSIM 시뮬레이션에 의하여 제안된 Z-HAF의 정상상태에서의 보상 성능을 파악하였다.

• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.46-50
• /
• 2003

Characteristic properties of backlight arraying external electrode fluorescent lamps has been investigated indriving with a square wave from switch inverters. In the backlight of 17 inch-diagonal with 12 lamps, the efficiency of 65-70 1m/W with the luminance of 5,000-10,000 cd/$\textrm m^2$ has been achieved in the frequency range 40-80 kHz where the higher frequency provides the lower operating voltage in the range 1.0-2.0 kV. In the frequency above 80 kHz, a stable and an uniform luminance in the backlight panel can not be achieved.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.71-73
• /
• 1995

For the accurate analysis of induction motors driven by PWM-type inverter, a time-stepping finite element method is presented in this paper. Since the PWM-type source voltage is not sinusoidal, the time harmonic method can not be used. Therefore, we used a time-stepping method, where the space harmonics due to the slot structure can be analyzed and each time-step size is determined from each increase of rotor position. As a numerical example, an induction motor of 20 Hp, 3 phase and 6 pole is analyzed. First, numerical results of the time-stepping finite element analysis are compared to those of conventional equivated circuit analysts. Next, the stator current characteristic obtained from PWM voltage source is compared to that from sinusoidal voltage source.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.78-86
• /
• 2005

Recently, a fuel cell with low voltage and high current output characteristics is remarkable for new generation system. It needs both a dc-dc boost converter and dc-ac inverter to be used in fuel cell generation system. Therefore, this paper presents dc-dc active clamp current-fed half-bridge converter with ZVS for fuel cell generation system. The proposed converter has outstanding advantages over the conventional dc-dc converters with respect to high efficiency and high component utilization. The Fuel Cell generation system consist of active clamp current-fed half-bridge converter to boost the Fuel Cell(PEMFC) voltage(28∼43[Vdc]) to 380[Vdc]. A single phase full-bridge inverter is implemented to produce 220[Vac], 60[Hz] AC outputs.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.11
• /
• pp.215-222
• /
• 2018

In this paper, the research on the energy storage system adapting super-capacitor has been performed. The most advanced features compared to the conventional lead-acid battery systems is that it can obtain high power capability due to the super capacitor power characteristics. The suggested system can attain high power in short times and achieve high power quality improvements. The application areas are power quality improvement system, motor start power which requires high power during transient times. The energy conversion system consists of bi-directional converter and inverter and advantages of high speed, high power charging and discharging performances. The design steps for the two loop controller of the bi-directional inverter are suggested and verified by the experiment and manufacturing. The two loop controller design starts from linearized transfer function which is calculated from the state averaging model including state decoupling method. The current controller requirements are 20% overshoot and settling time and voltage controller are no overshoot and settling time which is 10 times longer than current controller. The design is verified from the step input response. The designed controllers have unity power factor characteristics and thus can improve the power quality of the grid. It also has fast response time and zero steady state error.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.266-269
• /
• 1999

Several power factor correction(PFC) circuits are presented to achieve high PF electronic ballast for both voltage-fed and current-fed electronic ballast. The proposed PFC circuits use valley-fill(VF) type DC-link stages modified from the conventional VF circuit to adopt the charge pumping method for PFC operations during the valley intervals. In voltage-fed ballast, charge pump capacitors are connected with the resonant capacitors. In current-fed type, the charge pump capacitors are connected with the additional secondary-side of the power transformer. The measured PF and THD are higher than 0.99 and 15% for all proposed PFC circuits. The lamp current CF is also acceptable in the proposed circuits. The proposed circuit is suitable for implementing cost-effective electronic ballast.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.947-950
• /
• 2005

For revolving and elevating a turret of a tank, we substitute an existing oil pressure system with an electric system using a motor and applied the vector control method to this system. A switching method of an inverter for providing desired sinusoidal current to each phase of a motor, we adopted min-max pulse width modulation method which takes less computation time, rather than space vector pulse width modulation method. We designed a digital filter and applied it to the control system. Developed current controller is verified it's performance through a current control test, speed control test, frequency response and tracking a profile of speed test.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.391-394
• /
• 2014

In this paper, we introduce a method of determining the absolute position of the rotor for the vector control of Hall sensor type multi-pole BLDC motor using the DSP(TMS320F28335), and implement an algorithm to complement the problems of the conventional method. The switching method of the inverter for providing desired sinusoidal current to each phase of a motor, we adopt Space-Vector pulse width modulation method. In order to increase the speed range, Field-Weakness control method are used. In order to verify the proposed algorithm, we compare the value of Iqe, Ide and phase currents with the values before compensated.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.120-126
• /
• 2021

DC-link capacitors are one of the main components in two-level three-phase voltage source inverters (VSIs); they provide the pulsating input current and stabilize the vacillating DC-link voltage. Ideally, the larger the capacitance of DC-link capacitors, the better the DC-link voltage stabilizes. However, high capacitance increases the cost and decreases the power density of VSI systems. Therefore, the capacitance should be chosen carefully on the basis of the DC-link voltage ripple requirement. However, the DC-link voltage ripple is dependent on the pulse-width modulation (PWM) strategy. This study especially presents a DC-link voltage ripple analysis when the minimum loss discontinuous PWM strategy is applied. Furthermore, an equation for the selection of the minimum capacitance of DC-link capacitors is proposed. Experimental results with R-L loads are also provided to verify the effectiveness of the presented analysis.