• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9B
• /
• pp.785-791
• /
• 2006

A CF-Poll frame which contains the channel reservation time can be piggybacked in QoS-Data frame to increase the channel efficiency in HCCA. However, if any QSTA in the network uses the low physical transmission rate, the QoS-Data frame which includes the CF-Poll frame must be transmitted by the minimum transmission rate. Therefore, it can cause the decrease of the channel efficiency and the increase of the frame transmission delay for other traffic streams when any QSTA has the low physical transmission rate. In this paper, we define this phenomenon as the piggyback problem at the low physical transmission rate and evaluate the effect of this problem. In the simulation results, when a CF-Poll piggyback is used, the delay is increased about 25% if any QSTA has the low physical transmission rate, while the delay is decreased about 7.8% if all QSTA has the high physical transmission rate. We also found that the gain of the CF-Poll piggyback mechanism is achieved when all QSTA has higher physical transmission rate than 24 or 36Mbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12B
• /
• pp.1013-1021
• /
• 2004

Recently, there have been the rapid increasing needs to integrate high-speed communications and digital TV in home network. To realize the integration of those services, the MIC formulated the broadband convergence network (BcN) plan as one of the new growth engines. The BcN will be implemented by FTTH solutions and these solutions are designed to support digital home network. To develop and promote the BcN, we need to find the bandwidth requirements for home network. This paper will examine the bandwidth requirements in detail to accommodate data traffics for high-speed communications and TV at building intra network and home intra network.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.42-49
• /
• 2011

Telemetry link requires high data rate to transmit the multimedia data for lunar explorations in space communications. In this paper, we analyze a data rate with the modulation and channel coding schemes based on Consultative Committee for Space Data Systems (CCSDS) in S, X, Ku and Ka bands, respectively. Then, we suggests modulation and channel coding schemes to meet the link margins and have a maximum data rate for lunar explorations in telemetry links.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.147-152
• /
• 2004

OGC에서는 다양한 분야의 지리공간 정보를 손쉽게 상호 운용하기 위해 이질적인 환경의 지리공간 정보를 XML로 인코딩하는 GML 명세를 제시하였다. 그러나 GML 문서는 텍스트 구조로 되어있어 데이타 용량이 커지며 전송 시 속도가 현저히 저하되고, 문서 스캔 비용이 많이 든다는 문제가 있다. 그러므로, 대용량의 GML 문서를 정보 손실 없이 변환하여 전송 속도와 문서 스캔 속도를 향상시키기 위한 방법이 필요하다. 이에 OGC에서는 최근 바이너리 XML 형식인 BXML을 제안하였다. 본 논문에서는 BXML 형식을 사용하여 GML 문서를 토큰화하고, 토큰을 정의된 바이트 코드로 변환하여 문서의 크기를 줄이고 전송 속도와 문서 스캔 속도를 향상시키는 효율적인 GML 문서 변환 및 전송 시스템을 설계하고 구현하였다. GML 운서 변환 및 전송 시스템은 GML 문서와 BXML 문서를 상호 변환하는 기능과 BXML 문서에서 공간 데이타를 추출하여 디스플레이 하는 기능을 제공한다. 성능 평가 결과 GML 문서 변환 및 전송 시스템 사용시 GML 문서의 크기는 최대 80% 감소하였고 전송 속도는 최대 3.5배 향상되었다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.1
• /
• pp.29-34
• /
• 2012

Wireless multicast service can be used for video streaming service to save the network resources by sending the same popular multimedia contents to a group of users at once. For better multimedia streaming multicast service, we propose a quality-aware rate adaptation (QARA) scheme for scalable video multicast in rate adaptive wireless networks. In QARA, transmission rate is determined depending on the content's type and users' channel conditions. First, the base layer is transmitted by a low rate for high reliability. That means we provide basic service quality to all users. On the contrary, the transmission rate for enhancement layer is adapted by using channel condition feedback from a randomly selected node. So, the enhancement layer frames in a multimedia content is sent with various transmission rates. Therefore, each node can be provided with differentiated quality services. Consequently, QARA is capable of serving heterogeneous population of mobile nodes. Moreover, it can utilize network resources more efficiently. Our simulation results show that QARA outperforms utilization of the available transmission rate and reduces the data transmission time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.647-650
• /
• 2004

MAC RX FIFO은 10Gbps전용 전송속도에서 제공하는 FIFO모듈이다. 10Gbps이상의 전송속도에서는 전송부, 수신부모두 양방향 전송신가능한 Full Duplex(전이중)방식을 사용한다. 기존 FIFO의 임시 버퍼기능 뿐만 아니라 프레임 흐름 컨트롤 블록을 적용하여 전송간의 프레임 흐름제어 기능을 수행한다. 하위계층에서 MAC으로부터 전송되는 데이터는 64비트와 데이터 유효 정보를 가진 8비트 데이터 유효 정보비트를 가진다. 이렇게 전송되는 데이터는 MAC RX FIFO에 프레임단위로 저장되어 프레임간의 구분정보 Codeword프레임을 확인하여 새프레임 데이터를 확인한다. 사용자계층에는 데이터 128비트와 유효 정보비트 16비트로 사용자계층에 전송한다. 본 논문에서는 10G 전송속도을 갖는 MAC RX FIFO을 설계한다. VHDL언어를 사용하였고 ModelSim5.6a로 시뮬레이션하여 파형분석과 타이밍 분석하여 정상적인 동작을 확인한다. MAC RX FIFO는 10Gbps전송속도에서 요구되어지는 모듈에서 Flow Control, Pause프레임기능을 갖는 모듈에 적용되어 사용가능 할 것으로 사료된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.734-740
• /
• 2012

In this paper, we propose a method for throughput improvement in multirate multihop wireless networks with intra-session network coding. A multirate transmission supports several rates so that it has a tradeoff between transmission rate and transmission range, therefore multirate can cope with the performance degradation. We present the rate selection method with intra-session network coding in multirate nodes. The effective transmission rate is calculated by using intra-session network coding, and then its maximum effective transmission rate is selected. Concurrent transmission set is determined by selected transmission rate and then the linear programming is formulated for throughput calculation in multihop wireless networks. We evaluate the performance by using MATLAB and lp_solve programs in two topologies. It is shown that the throughput of the proposed method is improved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.133-138
• /
• 2001

The high-speed data service is on the increase and on the development because of using the coaxial cable which hold the most part of subscriber's loop, the transmission rate in a subscriber line has influenced by an external-electromagnetic factor such as the falling of a thunderbolt and the electromagnetic induction on transmission line. this external environment gets the noise of a communications line and then has an influence to the transmission speed and quality for the high-speed data service. this paper makes an analysis of noise characteristic appeared a subscriber communications line, measures a transmission speed per each cable-distance and resolves these relationship by putting the noise, which has affected extensively the transmission quality of ADSL service, into a subscriber line.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.219-226
• /
• 2015

As a representative system of the 4th generation mobile communication system, LTE provides much higher transmission rate than the former ones. Considering the varying property that a wireless environment shows, the transmission rate is influenced very deeply by the wireless channel conditions. The transmission rate is one of the most important attributes that has a primary effect on user's satisfaction of the service provided through the LTE system. After we have selected a few metrics that indicate the wireless channel quality, therefore, we have conducted a measurement for the metrics over the real commercial LTE system. By analyzing the measured results, we have found that the channel quality affect more on the transmission rate as the channel quality becomes poorer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.433-435
• /
• 2009

어떤 데이터를 전송할 경우 시스템의 설계에 좌우 되는 경우가 많다. 상호간에 정보를 전달 할 경우 오류 없이 정확히 전송하기 위한 여러 가지 요소 중에서 기본적인 베이스 설계 시 고려 사항, 전송속도, 프로세서의 Logic 선정에 관한 내용을 본 연구를 통해서 제안 하고자 한다. 본 연구는 FPGA의 구현 가능 Logic 중 SSTL2-II 2.5V Logic을 가지고 실험을 하였으며, 전송 선로의 길이 변화와 데이터 속도의 변화 시 얻어지는 데이터 특성을 살펴보았다. 제작된 PCB상에 30cm의 패턴과 케이블을 이용 하였고 전송속도변화에 따른 특성을 측정 하였다. 전송 선로의 길이가 30cm로 하고 데이터 속도가 100Mbps일 경우 비교적 안정한 특성을 얻었다.