Purpose: To design and fabricate the distributed auto edging machine for the development. Methods: We got the necessary data needed in design by using CAD. Based on the these data, we fabricated the trial product for the development of the distributed auto edging machine. Results: The patternless mode could be operated by receiving the eyesize data from the auto lay-outer with the RS232C transmission system and the pattern mode could be operated by setting the pattern on the left side of the machine. The distributed auto edging machine were composed with combinations of many elements; head, auto arm, pattern clamp and grinding wheels. The head part controlled the grinding of ophthalmic lens by operating the vertical and horizontal motors. The wheels part was comprised of glass mode, plastic mode, V-bevel mode and polish mode. The slide in the auto arm was equipped on the below of the patten and the slide could hold up the pattern which was rotated by fixed shaft. The pattern clamp could move the head part to the up and down or right or left way by the manual operation of optometrists. Conclusions: We could succeed in making the trial product by applying it to the development of the distributed auto edging machine which could be used as the patternless mode and pattern mode, selectively. Therefore, it was confidently expected that this product was very helpful for the optometrists to dispense the ophthalmic lens because of its cost-efficiency and convenience.
Kim, Kwan-Kyu;Yeom, Keong-Tae;Kim, Kwan-Woong;Kim, Yong-Kab
The Journal of the Korea Contents Association
/
v.8
no.6
/
pp.1-7
/
2008
The paper is to solve the problem of existing sound system, which has difficulties of system organization and the increase of additional install cost and unfriendly interior. To solve the existing system, we drew the new sound system based on PLC and studied it. A transmitter and a receiver were designed using the PLC chip INT5500CS. Sound system was configured with a CD player that sound signals are sent from the transmitter and a speaker connected to the receiver. For analysis of characteristics of this system, a USBPre external sound card and Smaart Live 5 which is a PC-based sound measuring program were added. As a result of our experiment, the measured signal level is $2{\sim}3$[dB] lower than reference signal, latency is 16.69[ms] and the specific character of coherency is bad in high frequency band. Otherwise, this system transmits and receives signals over 90[%] in good condition as a result of measuring pink noise, frequency(1kHz), and phase, magnitude. In view of the result so far achieved, the system designed our team has excellent performance, it resolves defect of existing audio signal transmition system.
Journal of the Korea Academia-Industrial cooperation Society
/
v.11
no.8
/
pp.2983-2988
/
2010
The train control system used in Gyeongbu-line is classified in ATC, IXL and CTC. Domestic railway signaling systems are being developed by electrification. In these systems the electrification of interlocking reaches 57% and the safety equipments of railway crossings in trackside devices have completed their development into an integrated system. Block systems of all the existing sections have not yet electrified and integrated so that they need a number of complement in terms of construction and maintenance. For ABS currently used in existing domestic lines, and LEU being installed in Gyeongbu and Honam lines, although a train is controlled by the signaling information of the same train in the same location, the system is separately installed so that the same information is separately divided and transmitted at the each distinct system. Therefore, in the conventional ABS and LEU, there are a lot of duplicate installed compartments such as lamp detection and a power supply unit. Hence, we have a lot of problems: for maintenance, a lot of manpower and costs need to be invested and the overall manufacturing costs get higher, as well as the construction costs by duplicate. Therefore, this paper suggest design to develop an integrated electronic Block Control Unit by the integration of the currently used ABS, and communication and electronic technology. We are to monitor and manage the block systems in the corresponding station by integrating. And we are to transmit information together with LEU, which is an ATS wayside transmitter.
최근 개인 휴대 통신에 대한 관심도가 증가하면서 B-ISDN (Broadband Integrated Services Digital Network)과 같은 기존의 유선 망에서 제공하던 다양한 멀티미디어 응용 지원을 무선 망으로 확장시키기 위한 연구가 활발히 진행되고 있다. 그러나 기존의 유선 망에서는 멀티미디어 응용 지원을 위해 QoS (Quality of Service) Provisioning에 관한 많은 연구가 되어 있으나 무선 망에서는 이동성과 무선 전파의 열악한 전송으로 인해 새로운 QoS Provisioning 방법에 관한 연구가 필수적이다. 본 논문에서는 이러한 무선 망의 특수성으로 인해 발생할 수 있는 서비스의 질 저하와 강제 종료를 줄임으로써 지속적인 QoS를 보장해 주고 한정된 무선 자원을 효율적으로 사용하며 처리에 의한 오버헤드를 줄이기 위하여 다음과 같은 세 가지 방법을 제안하였다. 첫째, 핸드오프 강제 종료율을 줄이기 위하여 대역폭 예약 방법을 사용하되 특정 셀의 트래픽 특성에 맞게 또한 시간대에 따른 트래픽 특성에 따라 예약 대역폭의 양을 조절하는 적응적 대역폭 예약 방법이다. 둘째, 많은 경우 각 셀의 트랙픽 변화는 일정한 주기로 변화한다는 특성에 따라 과거의 트래픽 정보를 이용하는 예측 기반의 대역폭 예약 방법이다. 마지막으로 호의 종류, 트래픽 특성, 단말기의 이동 속도에 따라 다른 우선 순위에 의해 호 수락 제어를 수행하는 우선 순위 기반의 호 수락 제어를 제안하였다. 시뮬레이션을 통하여 기존에 제안된 방법과 성능 비교하여, 요구되는 수준의 QoS 보장과 효율적인 자원의 사용, 요구되는 처리비용의 최소화를 통해 전체 시스템의 성능 향상을 입증하였다.Abstract As interest in wireless hand-held terminals and in personal communications services increases recently, there have been broad studies on the ways to support multimedia applications provided in wired networks such as B-ISDN (Broadband Integrated Services Digital Network) in wireless networks. However, since many studies have focused on Quality of Service (QoS) Provisioning in wired networks to provide multimedia applications, new methods of QoS Provisioning are needed in wireless networks to resolve the problem of wireless channel fading and the difficulty of mobility occurred in wireless networks. This paper proposes three schemes of QoS Provisioning in wireless networks which will make continuous QoS guarantee and efficient use of limited wireless resources possible. The first scheme reserves bandwidth in proportion to the amount of real-time traffic in the neighbor cells to decrease the handoff dropping rate of delay sensitive real-time connections, adapting reserved bandwidth for efficient resource utilization. The second scheme is predictive bandwidth reservation scheme that utilizes the past handoff information. It can decrease overheads required to adapt bandwidth reservation. The last scheme is priority-based call admission control prioritizing traffic type (real-time traffic/ non-real-time traffic), connection type (new connection /handoff connection), and mobile terminal speed (fast mobile/slow mobile). Simulation results show that the proposed QoS Provisioning schemes improve the total system performance by achieving three goals - required QoS guarantee, higher bandwidth utilization and less overhead.
인터넷에서 통합서비스를 제공하기 위해서는 종단간 다양한 QoS를 지원해야 하는데 이를 위해서는 인터넷뿐 아니라 종단 사용자와 인터넷을 연결하는 랜에서의 QoS 지원이 필요하다. 이에, IETF는 특정 링크 계층으로 구성되는 서브넷에서 QoS 지원을 위한 기본 골격을 제안하였다. 그런데 , 매체 접근방식에 따라 서브넷이 제공할 수 있는 서비스의 정도가 크게 달라지기 때문에 실제로 IS802 모델을 특정서브넷에 구현하기 위해서는 이에 대한 고려가 필요하다. 본 논문에서는 통합서비스를 지원하기 위한 기반이 되는 서브넷 차원에서의 우선순위 지원을 목표로 IS802 모델을 전통적인 이더넷과 토큰링에 적용하여 보았다. 먼저, IS802 모델의 대역폭관리자를 적용한 이더넷 IS모델과 토큰링_IS 모델의 구현을 제안하고 특별히, 이더넷의 경우 매체 접근 방식의 특성상 IS802 모델의 적용만으로는 서브넷차원에서의 우선순위에 따른 전송을 지원할 수 없기 때문에 이를 보완하기 위한 페이즈 모델을 추가로 제안하였다. 시뮬레이션을 통해 기존의 전통적인 이더넷과 토큰링 및 새롭게 표준화된 IS802 모델을 적용한 이더넷 _IS와 토큰링 _IS, 그리고 페이즈 모델간의 성능을 비교하였다. 시뮬레이션결과 토큰링의 경우 단순한 입장 제어에 의해서도 QoS 지원 정도가 크게 향상될수 있음을 볼 수 있었다. 또한 , 페이즈 모델의 경우 이더넷의 매체 접근 방식을 상당히 보완함으로써 QoS 지원 정도가 크게 향상될 수 있음을 볼 수 있었다. 또한, 페이즈 모델의 경우 이더넷의 매체 접근 방식을 상당히 보완함으로써 QoS 지원을 요구하는 플로우에대해서는 전통적인 이더넷이나 이더넷_IS 비해 훨씬 안정적인 서브넷 차원의 우선순위지원 서비스를 제공할 수 있음을 확인할 수 있었다.제공하는 멀티미디어 동기화 편집기와 변환기 및 상영기를 ScriptX를 이용하여 Windows95 상에 구현하였다.기 위한 간단한 例를 들어 봄으로써 이 글을 쓰는 동기으 일면을 대신하고자 한다.置함으로 이것을 Multi-Drop(points) system으로 swiching System을 利用 Mini-Network을 構成할 수도 있다.크 구성 관리 서버 시스템 개발에 대한 비용을 줄일 수 있다. 기대된다.e 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에서 그 주산기사망률(周産基死亡率)이 각각 가장 낮았다. 2. 사산(死産)과 초생아사망(初生兒死亡)을 구분(區分)하여 고려해 볼때 사산(死産)은 모성(母性)의 임신력(姙娠歷)
Journal of the Institute of Electronics Engineers of Korea SD
/
v.42
no.3
s.333
/
pp.25-34
/
2005
In this paper, we analyzed and measured the electrical crosstalk characteristics of a triplex transceiver module for ethernet Passive optical networks(EPONS). And we improved the electrical crosstalk levels using Dummy ground lines with signal lines. The triplex transceiver module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and a analog photodetector as a community antenna television signal receiver. And there are integrated on silicon substrate. The digital receiver and analog receiver sensitivity have to meet -24 dBm at $BER=10^{-l2}$ and -7.7 dBm at 44 dB SNR. And the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the Dummy ground line with $100\;{\mu}m$ space from signal lines and separates 4 mm among devices respectively, is satisfied the electrical crosstalk level compared to simple structure. This proposed structure can be easily implemented with design convenience and greatly reduced the silicon substrate size about $50\%$.
Journal of the Institute of Electronics Engineers of Korea SD
/
v.44
no.8
/
pp.80-88
/
2007
High adaptability and scalability are two critical issues in implementing a very complex system in a single chip. To obtain high adaptability and scalability, novel system design methodology known as communication-based system design has gained large attention from SoC designers. NoC (Network-on-Chip) is such an on-chip communication-based design approach for the next generation SoC design. To provide high adaptability and scalability, NoCs employ network interfaces and routers as their main communication structures and transmit and receive packetized data over such structures. However, data packetization, and routing overhead in terms of run time and area may cost too much compared with conventional SoC communication structure. Therefore, in this research, we propose a novel methodology which automatically generates a hybrid communication structure. In this work, we map traditional pin-to-pin wiring structure for frequent and timing critical communication, and map flexible and scalable structure for infrequent, or highly variable communication patterns. Even though, we simplify the communication structure significantly through our algorithm the connectivity or the scalability of the communication modules are almost maintained as the original NoC design. Using this method, we could improve the timing performance by 49.19%, and the area taken by the communication structure has been reduced by 24.03%.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.18
no.6
/
pp.211-221
/
2019
The death toll for every 10,000 cars registered in Korea is 1.4, which is still the lowest among OECD members, and the need for rescue and response systems is emerging. In response, the company is developing a vehicle ICT-based emergency rescue system (e-Call) that can handle accidents such as rapid and accurate life saving by automatically sending accident detection and related information to the central center in the event of a traffic accident. However, ordinary citizens are negative about the installation and cost of e-Call services. To solve these problems, various introduction and operation methods of e-Call were proposed for activation of terminal distribution. In addition, the effect of introducing e-Call was analyzed by predicting the penetration rate of e-Call terminals. Analysis shows that 463 to 926 deaths and 3,335 to 6,66.9 billion won will be saved in 10 years after the introduction of e-Call terminals.
The Journal of Korean Institute of Communications and Information Sciences
/
v.30
no.5B
/
pp.253-263
/
2005
This paper proposed a mobile multicast technique to satisfy end-to-end QoS for various user requirements in mobile network environment. In order to provide seamless mobility, fast handoff technique was applied. By using L2 mobile trigger, it was possible to minimize remarkable amount of packet loss by delay occurred during handoff. To provide efficient multicast, concept of hierarchy was introduced to Xcast++, which results in a creation of HXcast++. HXcast++ optimized transfer path of multicast and reduced expensive multicast maintenance costs caused by frequent handoff. Suggestion of GMA (Group Management Agent) mechanism allows joining to group immediately without waiting IGMP Membership query during handoff. GMA mechanism will minimize the delay for group registration process and the resource usage due to delay of withdrawal process. And also use of buffering & forwarding technique minimized packet loss during generation of multicast tree. IntServ/RSVP was used to provide End-to-End QoS in local domain and DiffServ was used in global domain. To minimize reestablishment of RSVP session delay, extended HXcast++ control messages ware designed to require PATH message. HXcast++ proposed in this thesis is defined as multicast technique to provide end-to-end QoS and also to satisfy various user requirements in mobile network environment.
Earth's environment issues are introduced recently and every year the social loss have been occurred by the impact of various disaster. This kind of disaster and weather problems are the increasing reason of electricity transmission network equipment's failures because of exposing by the natural environment. The emergency and abnormal status of electricity equipment make the power outage of manufacturing plant and discomfort of people's lives. So, to protect the electricity equipment from the natural disasters and to supply the power to customer as stable, the supporting systems are required. In this paper, the research results are described the development process and the outcomes of the real-time natural disaster failure analysis information system including the describing about the impact of disaster and weather change, making the natural weather information, and linking the realtime monitoring system. As of development process, according to application development methodology, techniques are enumerated including the real time interface with related systems, the analysing the geographic information on the digital map using GIS application technology to extract the malfunction equipment potentially and to manage the equipments efficiently. Through this system makes remarkable performance it minimize the failures of the equipments, the increasing the efficiency of the equipment operation, the support of scientific information related on the mid-term enhancement plan, the savings on equipment investment, the quality upgrading of electricity supply, and the various supports in the field.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.