• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.114-118
• /
• 2005

CFD simulation was peformed for 2D and 3D flying and rotating frisbees. Multiple reference method(MRF) was utilized to consider the rotation of 3D model. Geometry change of 2D model shows dramatic increase of lift, but 3D simulation results for geometry change show decrease of lift and drag. Ground effect increases the lift of the frisbee being close to ground.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.89-94
• /
• 2003

A successful store separation analysis tool, MSAP(Multi-body Separation Analysis Program) has been applied to F/A-18C/JDAM CFD Challenge II. The challenge was devised to challenge CFD community to use CFD methodologies to predict and match the trajectory of a JDAM MK-84 separating from F/A-l8C. Trajectory simulations for two flight conditions were performed. Comparison between computed and measured flight trajectories for both conditions shows a good agreement.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1995년도 추계 학술대회논문집
• /
• pp.11-11
• /
• 1995

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.209-209
• /
• 2006

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.3-6
• /
• 2006

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.333-334
• /
• 2006

• 한국항공우주학회지
• /
• 제49권4호
• /
• pp.263-272
• /
• 2021

본 논문은 외장 분리 풍동시험 기법을 적용한 전산유체해석을 통하여 획득한 데이터와 풍동시험을 통하여 획득한 데이터를 비교 연구한 것이다. 전산유체해석은 하모닉 방정식을 적용한 비정상해석 기법을 사용하여 수행하였으며, 비정상 해석으로부터 외장의 공력계수들과 6 자유도 외장 분리 시뮬레이션을 위한 공력 데이터베이스를 생성하였다. 해당 데이터베이스와 풍동시험 기반 데이터베이스를 이용한 외장의 분리 궤적 시뮬레이션 수행하였으며, 그 결과를 비행시험 결과와 비교하였다. 비교를 통하여 시뮬레이션의 적절성을 확인하였으며, 외장 분리 풍동시험 기법을 전산유체해석에 적용하여 획득한 외장 분리 공력 데이터베이스는 외장분리 궤적 시뮬레이션 적용에 타당함을 확인하였다.

• 한국전산유체공학회지
• /
• 제18권2호
• /
• pp.72-77
• /
• 2013

The Pre-processor program for CFD is being developed using wxWidgets and OpenGL libraries. This program can be run on both Windows and Linux operating systems. Undergraduate students and beginners can learn and use this very easily by menu and templates. Until now, structured mesh can be created in Cartesian or Cylindrical coordinates. This program will be used easily to make various type of meshes using templates.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.179-182
• /
• 2011

The purpose of this study is to evaluate a defrost model for the possibility of defrosting on wheelhouse window and the heat capacity if defrosting nozzle by using the commercial CFD solver FLUENT. A detailed simulation model has been created which contains the defrosting nozzle, window and the interior/exterior forced convection boundary. In this numerical study, the heat and mass transfer coupled during defrosting and investigated the defrost time for different hot gas temperature, external wind speed and temperature condition.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.174-181
• /
• 2001

The Gird is a communication service that collaborates dispersed high performance computers, large-scale databases and modern equipments so that those can be shared and worked together. In this paper. CFD research based on National Grid project is discussed. To validate the Grid technology, the flow past ONERA M6 wing and the flow past infinite wing are simulated on the National Grid testbed.